The availability of cheap electronic goods combined with our ever-advancing world of technology are rapidly creating a worldwide crisis. E-waste, or electronic waste, resulting from consumers improperly disposing of old equipment without a second glance, is taking its toll not only on the environment, but on the population as well.

The fastest growing waste stream in many countries, e-waste includes any item that utilizes a battery or plugs into an electrical outlet for operation.

Twenty five U.S. states have laws requiring e-waste recycling, which is typically free to consumers, however comprehensive federal laws have not yet been established. 15 states have landfill disposal bans on electronic waste. For information on your state, contact theNational Center for Electronics Recycling.

In cooperation with HirePatriots, a program of parent non-profit Patriotic Hearts dedicated to providing jobs for U.S. veterans and support services for their families, Mr. Electric® offers complete, professional electronic waste management solutions. As part of the Veterans Green Projects, HirePatriots is leading the way in providing safe e-waste recycling and disposal. Contact Mr. Electric today for all your e-waste management needs. With the help of HirePatriots, we can help you safely and responsibly recycle or dispose of your used electronic gadgets and appliances. Your world – and your family - is counting on you.  

There are a lot of interesting facts and tidbits about solar power and its usage. If solar panel installation is something you are considering, here are four points you may find helpful in making your decision:

It does not cost as much as you think.

Solar panel costs are not as high as most people assume. There are even financing plans that you can look into. Also, they end up saving you a bunch on your electricity bill.

You are going green.

Having a solar panel installation done on your home greatly reduces your carbon footprint. Powering your home via solar energy requires no pollutants being expelled into our water or air. While your home is basically ran on solar energy, you still have the back up of electricity when its clouded over or rainy for several days.

There are different types of solar panels.

You should educate yourself on the different types of solar panels if you are looking into solar installation for your home. There are photovoltaic panels and solar thermal panels. The photovoltaic panels convert sunlight into usable energy. Solar thermal panels absorb heat and then distributes that heat for warming purposes.

The idea of using solar energy is not a new innovation.

Back in the Fifteenth Century, Leonardo Da Vinci had sketched several ideas on how to harness the power radiating from the sun. Although much was not done with it, it still proves that great minds thought early on that using solar energy was wise.

If you are interested in having solar panels installed, look no further than The Electric Connection. If you need solar installers based in the Los Angeles area, we can help you out. You can also visit our website or give us a call today for more information on solar panel installation and benefits.

Aluminum LED profile housings allow you to create customized light fixtures with LED strip lights. Our Klus brand LED channels are available in many different styles, including recessed-, or flexible, O-shaped, and more. Available in 1- and 2-meter lengths, the channels can be easily cut for any application from under-cabinet lighting and bookshelf lighting to showcase lighting and transition strip lighting. They’re available with a variety of lens options, such as clear, frosted, and etched that complete the profiles. We’ve put together a step-by-step guide for using these channels to create your own light fixtures. Please note that your specific channel might vary from the one used in this tutorial.

Materials needed:

1. With a pair of clippers, carefully clip through the clear plastic heat shrink as shown in figures A-C. You will want to take your time and be careful not to cut the strip’s wires while removing it.

2. Lay the LED strip into the channel, and position it along the bottom so that the ends of the strip and the channel are lined up (fig. A). Now, remove the paper from the strip’s adhesive backing (fig. B), and adhere the strip to the LED channel—starting at the lined end and working your way to the other end of the strip. Be sure to leave roughly 1/4-inch free at the end of the channel so that you can install the end cap as shown in figure C.

3. If one of your end caps doesn’t come with a pre-drilled hole, you will need to drill your own to allow the wires of the LED strip light to come through. In this case, we used a Dremel tool, but other options are viable as well. Regardless of the tool you choose, it is helpful to mark the end cap where you would like the wires to come through. Start the hole small, and increase the size as necessary.

4. Place the end cap on the wired side of the strip by threading the wires through the end cap as shown in figure A. Insert the end cap into the end of the light bar, and push firmly until it is fully in place (fig. B).

5. On the open end of the bar, slightly peel up the end of the LED strip (fig. A); this is necessary to install the end cap. Now measure your channel lens, and trim off the excess with clippers (fig. B). Be careful when trimming to avoid cracking the plastic. Excess material can be lightly sanded off. Once the lens has been cut to the proper length, slide it into the channel, and install the end cap as shown in figures C and D.

6. That’s it! Your customized LED light fixture is complete and ready for installation, which we will cover in the next step.

7. Mounting this LED profile is as easy as applying double-sided tape to the back of it and sticking it to your intended surface. Be sure to cut the tape to fit the back of the LED profile and to leave the tape backing on the side not attached to the channel until you are ready to mount it.

For most LED profiles, mounting clips are available for a more permanent installation.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

If there’s one thing kids seem to love, it’s playing with everything around the house other than their toys—the more dangerous the better! Electrical outlets in particular are an endless source of fascination for young children, and according to the Electrical Safety Foundation International, hospitals across the country treat nearly seven children for electric shock and burn injuries related to tampering with wall outlets each day. But buying childproofing devices for your electrical outlets can be a challenge, and if you don’t choose carefully they may not fit in your outlets or may be too easy for your child to pull out. So how do you choose?

There are two types of outlets commonly seen in homes—standard and decorator outlets. You can tell them apart by looking at the number of screws they have:

Different types of outlets have different requirements for childproofing materials, so figuring out which type you have is very important. Note that standard outlets will be able to use most childproofing methods—decorator outlets are a little more complicated, but the packages on the items you buy should list whether they are compatible. Remember that most items approved for decorator outlets will not work in standard outlets, and vice-versa, so choose carefully!

Outlet covers, which usually plug right into the outlet, are a good choice for outlets that have “fixed” items that are plugged in all the time, such as lamps or televisions, as well as areas that use large adapters like at the computer. Outlet covers are effective at keeping both infants and toddlers out of the outlets, which means they’ll last for a number of years. Outlet covers for both standard and decorator outlets can be purchased.

Unlike outlet covers, safety outlet plates replace your existing outlet plates and have a small sliding door that covers the receptacle when not in use. These work best for outlets that you have to repeatedly plug things into and unplug things from, such as a vacuum cleaner. They are also difficult for children to figure out and should be effective for many years.

Ideal for outlets that are kept out of site and rarely used, outlet plugs are usually easier for kids to figure out but are still good at preventing access to the inside of the outlet. The good news is that they can be used interchangeably in standard and decorator outlets.

Keeping your children safe is your number one priority, and childproofing your electrical outlets is a great way to do that. Damaged or malfunctioning outlets can also be a major safety hazard in your home, so if you need outlet repair in Maryland, Virginia, or Washington, DC, call Kolb Electric today!