In any workplace, change is a common occurrence. Things like new equipment, movement of said equipment and any change in wiring is not visible to staff unless it’s properly documented. If it is properly labelled, a cable managing system can help in solving and detecting exactly where any problems occur.

Since practically every process in a company relies on electrical system, any disruptions can affect a wide range of processes, ranging from IT to basic infrastructure, leading to a possible halt in daily business activities and production.

Here are the main benefits of clearly labeling infrastructure components:

Without proper labels, a company can lose valuable time and assets trying to discover where and what the problem is, before they can work on fixing it, and without warranty protection and long-term maintenance of electrical, telecom, A/V and security networking systems, the loss can be immense.

By Spencer Cutright

Let’s face it: no summer vacation is complete without plenty of pictures. With the invention of the “selfie stick” and apps like Instagram and Snapchat, taking pictures has never been so user friendly, and photography has never been more prevalent than it is today.

However, this would not be possible if flash photography had never been invented. It’s hard to believe, but flash wasn’t always as common or safe as it is today. Here is a brief look at the history of flash photography.

Flash photography originally began as an unsafe and incredibly intricate device known as the flash lamp, which was invented in 1899. Photographers would fill a pan with flash powder, which was then ignited, leading to a small explosion that produced a quick flash. The flash lamp is known for being very unsafe, and many photographers who used it were either killed or injured in the process.

Around the 1930s, flash bulbs replaced flash powder. Oxygen-filled bulbs were electricity ignited, producing a quick bright flash. However, the bulbs could only be used once, and they were often too hot to handle right after the flash.

Thirty years after the flash bulb, the cheaper and more efficient electronic flash was invented. Electronic flashers are often attached to a camera and produce an instantaneous and very bright flash through a flash tube when a picture is taken.

Found on camera phones as early as 2000, LED flash uses high current LEDs to produce a quick flash when a picture is taken. LED flash makes flash photography efficient and miniaturized.

So next time you pull out our camera or smartphone to capture a special moment this summer, keep in mind all the inventors who made modern photography possible.  The future of photography is certainly bright with many possibilities ahead.

We all use electricity so much in our daily lives that it has become something we take for granted, but while electricity may be such a useful tool, it is worth keeping an eye on your electrical fixtures and fittings for any signs of potential dangers.

Most people will admit that they rarely check the condition of their plugs, cables, or sockets and will normally leave it to their electricians whenever they visit. To follow safety guidelines, it is recommended that all equipment be used correctly according to the manufacturer’s directions and any damaged items be repaired or replaced with new ones. You can look out for a few things to ensure your family stays safe from electrical fires or electrocution.

Always check plugs and sockets for any sounds such as buzzing or crackling; you should look out for burn marks as well. Other things you can do include checking electrical appliances such as electric shavers, radios, or hairdryers that are being used near damp or wet environments or structures such as baths, showers, and swimming pools.

Check your home for any switches with too many appliances plugged into them and replace any damaged cables immediately. You can also protect yourself by making sure that you only use plugs with a standard safety mark.

The best thing you can do to help keep you and your family safe is to know where your home’s safety switch is located. If you cannot find it, ask your electrician to show you the next time he pays you a visit.

In case of an emergency, or if there happens to be faulty or damaged wiring in your home, you can use the safety switch to cut off the power to prevent anyone from being electrocuted. Remember that any repairs that may need to be done will require a qualified electrician. Always use one you know and trust.

A school, whether its grade school or a college campus, can use up a lot of energy during the day. From heating the building to inefficient lighting fixtures in the building; a school that is running 8-10 hours a day can prove to be a huge consumer of energy and thus; a high overhead to maintain.

This post is specifically for those whom work for a school or college campus that can either make the decisions, or can recommend new ideas to those who do make these types of decisions. The overall goal of this post is to bring the most actionable energy saving ideas for schools so that you can start looking into them immediately.

We are going to be covering 15 practical tips and ways that you can start saving energy in schools and become a greener, more sustainable facility overall. Here they are…

hallways, classrooms, and really anywhere with lower ceilings that are flat.

This technology is, more often than not, fluorescent. Believe it or not, this actually isn’t the most energy efficient lighting technology out there. So what is you ask?

Well, LED technology is by far the most efficient luminaire on the market today. By switching from fluorescent to LED, you will be able to realize a 30% reduction in energy usage associated with your tube lights.

As for you parking lot and sports fields, you can make the switch away from technologies like metal halide or HPS over to LED and realize every greater energy savings by up to 75%! Talk about a lot of energy being reduced.

And no, screen savers don’t save energy. But, what does save energy more-so than a screen saver is the “sleep” function that every computer has. On top of that, next time you plan on upgrading your computers, make sure you buy Energy Star qualified ones. This means they’ve passed some energy efficiency tests and are much more energy efficient than non-qualified computers are (same with your lighting system, make sure it is Energy Star or building commissioning, you get every single last area of your school inspected to ensure it is running exactly how it was designed to run. A lot of times we overlook things that are unique issues to your school, and no matter how long of a list we read on ways to conserve energy at school; we will never see everything. So our tip for you is to bring in a professional to do a full building commissioning audit, and let them tell you what is up.

Face it, a lot of classes happen during broad daylight and by not using up that free light from outside is a pure waste. By opening blinds to there fullest (when appropriate) you can reduce the amount of lights you need on by nearly half, depending on the day and time of year.

Just make sure to remind everyone to do this otherwise, you’ll never will with this tactic. Remember: you need to get the school on board or else you can only do so much.

Alternatively to just opening the blinds and windows, installing skylights into virtually any area of the building can be an even more effective way of getting the most natural light into your building. This is probably most beneficial for areas that would otherwise have no natural light whatsoever, such as hallways or interior rooms.

We’ve already brought up some points about your heating system, but here is yet another. Think about how often students are in the hallways, not nearly as much as they are in classrooms, right? So, why not make an initiative to heat the classrooms and stop heating those huge hallways that waste tons of heat to the outside from all those doors being opened.

Just make sure that everyone is closing their doors if you do decide to go this route. Likewise, you could install doors that automatically close which will prevent random doors from being forgotten about.

Although this won’t directly save your school energy, it sure does help reduce both waste and energy associated with creating new materials. The most simple way to start the promotion of recycling at school is simple; make it readily available. If you aren’t putting recycle bins next to every trash bin, most people won’t go out of there way to recycle so they will just throw it away and let it go to the landfill.

A step further would even to start investment in solar technology can be hefty, but rebates and grants are out there to make it a more affordable option that ever. On top of that, you are becoming a role model to the community by showcasing what conserving energy can do when used with solar energy technology. Let solar generate your building a positive ROI all while conversing the planets resources.

We think the list could endless of all the possible ways to save energy in school, so we must of forgot some. Be sure to comment down below your energy conservation tips that will help out school facilities become greener!

Conclusion

All of these tips are exactly how energy efficient schools are becoming more sustainable, reducing ongoing costs, and generating a positive atmosphere and educational system for students and generations to come.

Don’t let the upfront costs scare you, instead look at the bigger picture. If you have to invest money now to save 10x later, isn’t it worth it? All of these things will do just that, improve the bottom line. And not only are we doing that, but we help the environment out just a little bit too. Sounds like a win-win to us! Just remember that saving energy at school doesn’t have to be hard, just take it step by step and you will slowly see the results of your efforts build up!

Anyways, to wrap it up we’d like to invite you to share any of your own energy conservation tips for schools that you may have done or even just thought of that may benefit other schools across the globe. Share your tips in the comments below, you never know who it may help. And remember, an energy saving school is a happy school!

How old is your home or business building? 20 years? 30 years? 40 years or more? When was the last time you had your wiring inspected? If your building is older than 25 years, you could be at risk for an electrical fire. Electrical fires are frequently caused by old components wearing out and failing, but these things can be hard to detect since so much of it is hidden from sight behind your drywall. So how do you know if you are at risk? Here are a few factors that frequently cause fires in older buildings.

From the 1880s until the mid-1930s, knob-and-tube wiring was the standard in running electricity lines through homes and businesses. Today, these systems are not permitted under business code except in extremely rare circumstances. If your home or business has this old system of wiring in it, odds are you should consult an electrician about replacing it with a modern system as soon as possible. Rodents have a thing for chewing on these exposed wires, making them tremendous fire hazards.

Modern appliances and equipment sometimes require a much higher amperage draw to function than old wires are rated to carry. When you overload a wire with too much amperage, it can get extremely hot, which can start fires inside your walls. If your electrical system is old, consider having it inspected by a professional who can tell you whether or not you should upgrade to wire rated for a higher amperage.

Part of being a home or property owner is improving your property. Those who have a knack for handiwork (or at least think they do) may have tried to modify their wiring in the past. This means there could be shoddy connections, loose live wires, and other serious fire hazards hidden behind your walls. Be extremely careful when cutting into drywall in an older home.

Over time, insulation on wires can age, become brittle, and crack. In other cases, the wires may have been chewed by rodents or screwed or nailed into by accident. This can leave the core of your wire exposed, which leaves it prone to sparking and potential fires.

The wires aren’t the only part of your home that’s at risk for starting a fire; old breakers can malfunction and overload if they are not maintained or upgraded every few decades. Have your old circuit breaker inspected by a professional who can test to make sure everything is still functioning properly, as well as replace any breakers that may not be working correctly.

Today’s electrical code is far more advanced and rigorous than it was in decades’ past. With new technology has come new safety standards. However, older buildings were not required to adhere to these new standards, and many of them have not been properly retrofitted with the latest in electrical tech. Odds are, if you have an older building, your electrical system would not pass inspection today. Let a professional take a look and work with you to eliminate the fire hazards and protect your property from a devastating fire.