Tangled wires are a pain in the neck. That's true whether you're managing multiple devices at your computer desk, trying to find space at a cluttered kitchen counter or juggling power tools at your workbench. One way to bring order to chaos is to create an overhead power strip, a project you can DIY with some very simple electrical work. Read on for some tips to get started.

A Simple Solution for Your Electrical Work

To create the most basic version of an overhead power strip, all you really need is a piece of wood, some screws, and a mountable power strip (look for one that has slots for screw heads in the bottom). For added convenience, a plastic raceway or access to a router tool will be helpful to secure the power strip's cord to the wood.

The first step, in that case, is to either use the router to cut a slot in the wood that can hold the cord, or attach the raceway to the wood for the same purpose. Make sure you leave room to attach the power strip itself, and there is enough cord left at the other end to reach the nearest outlet.

Securely Installing the Strip

Next, measure how far apart the screw slots are on the back of the power strip, and mark the distance out on the wood. Install appropriately-sized screws at the marked spots, leaving some clearance under the screw head so the power strip can easily slide on and off. Test out the setup and make sure that the strip fits and can hang securely upside down – if it's loose, you may have to adjust some of the screws.

Finally, you need to decide how to mount your overhead power strip. Options include hanging it under a kitchen cabinet or shelf on the workbench, affixing it to a wall, or using a post to hang it closer to the center of a room. Remember, this power strip is for your convenience, so you want to position it where it will be most useful.

Customize the Power Strip to Your Convenience

Of course, once you get the idea for how to hang a power strip, you can then customize it to your liking – for example, putting a hinge on the end allows you to swing it back against the wall when you aren't using it. You can also branch out with many of the modern, innovative power strip models on the market to customize your workspace even further.

For help keeping your cords in order, or assistance with any other electrical work, contact an expert electrician today.

LED Tubes and LED Panels become the best solution for the office workplace environment. They are cost effective lighting solutions, provide good lighting quality, last longer and contain or emit no harmful compounds while leaving an ecological footprint in each building. This article is going to explain the difference between tube fixtures and panel fixtures. They are both different, but often times get mixed up when talked about. Let’s clarify any confusions you may have about the two fixtures…

LED Panels are installed in dropped paneled ceilings. perfect replacement for expensive shatterproof fluorescent lamps. MyLEDLightingGuide LED tubes do not contain glass and will not shatter if dropped. Fluorescent tubes contain mercury, some projects decide for LED versions because they want to remove mercury out of the building.

All LED tubes use drivers that power the LEDs. The ballast is converting the AC power from the utility company into LED’s DC power. Some manufacturers incorporate the drivers in the LED tubes. Some decide to use an external driver outside of the tube. There are some subtle differences between the two designs. Retrofitting to LED tubes with internal drivers involves removing the ballast and rewiring the line source. Retrofitting external driver tubes involves removing the ballast, the line source gets wired to the external LED driver that is connected to the tubes. More and more people ask for LED tubes that can be just installed as a plug and play version into existing fixtures without removing or rewiring the existing ballast. While the installation of these tubes is simple, they are compatible with most ballast, but not all ballasts. Contact the lighting experts at MyLEDLightingGuide.com to ensure the tubes will run properly.

Changing the light at work and in offices is easily done by LED tubes. They are readily set up and use considerably less power. LED tube light sources offer smooth, stable and clear lighting conditions.

Austin Energy provides many significant energy efficiency programs that will provide you with significant financial savings while helping Austin conserve energy wisely. The list of programs Austin Energy has in place is comprehensive, generous, and quite frankly, astounding. These are designed to help everyone from business owners to residential home owners. These include the following programs and products; Austin Energy Green Building, GreenChoice® Renewable Energy Program, Federal Weatherization Assistance Program, Residential Power Saver™ Program, Free Home Improvements, Free Thermostats, Energy Miser vending machines, & air conditioners, Solar Photovoltaics, Residential Refrigerator Recycling, and Commercial Power Saver™ Program.