On average, over 350,000 home fires take place every year, claiming thousands of lives. How are your smoke detectors functioning? Don't make these mistakes with your smoke detectors:

Make sure your smoke detectors are installed correctly The U.S. Fire Administration recommends installing alarms both inside and outside sleeping areas. At a minimum, alarms should be located on all levels of your home, at least one near each sleeping area and preferably additional detectors in pathways between sleeping areas and exits out of your home. If you sleep with your bedroom door closed, smoke or use heat-producing appliances in or near your bedroom, or have noisy appliances in your bedroom that could block the sound of a smoke detector (TVs, stereos, air conditioners, and more), it is especially important to install one inside each bedroom. Always use a licensed electrician when installing hardwired smoke alarms. Alarms should be installed:

Smoke detectors save lives. Don’t fall victim to these common smoke detector problems or behind today’s recommended standards for protection. Contact Mr. Electric® today to ensure the proper installation and operation of these life-saving safety devices in your home.

Do you find energy conservation confusing? You're not alone. According to a recent study, Americans are by-and-large misinformed about what household appliances consume the most electricity. As a result, homeowners who wish to cut down on the energy they use in their home electrical work might find themselves spending time and resources to improve efficiency in areas where they won't see big gains. Read on to learn more about where most of our energy goes and how you can get the biggest payback for your conservation efforts.

The Failings of Cognitive Accessibility

In general, Americans tend to overestimate the amount of power that is devoted to common home devices like computers, television and lighting, while underestimating the amount of energy that is consumed by bigger ticket items like heat, air conditioning and hot water heating. That's because we confuse the amount of time we spend actively using a specific device with how much power it uses.

“Consumers tend to use the frequency with which they think or interact with a given energy source as a proxy for its consumption,” Ohio State University psychology doctoral student Dan Schley, lead author of the study, said to the Washington Post. For example, someone who spends eight hours a day working on a computer might naturally be inclined to think that device is what's driving up the electricity bill.

How to Make Your Actions Count

However, it turns out that the energy consumed by common electronics is dwarfed by what goes into major appliances. According to the U.S. Department of Energy, a whopping 48 percent of energy in the average home goes toward heating and air conditioning. The hot water heater takes the next largest individual chunk, at 17.7 percent. The refrigerator uses 13.7 percent, with all other appliances and electronics accounting for about 21 percent of the total.

The upshot? If you really want to cut back on consumption in your home electrical work, you need to target the biggest guzzlers. That means making interventions like installing smart thermostats, turning down your water heater temperature and beefing up the insulation in your home. The simplest, most effective change that most families can make is to bump the thermostat down a few degrees in the winter and up a few degrees in the summer.

Don't Neglect the Small Stuff

That's not to say you should ignore simple behavioral changes that can save money in other areas of your home electrical work – things like unplugging devices when they aren't in use, installing energy efficient cable boxes, using the power-saving settings on your computer and turning off the lights when you aren't in the room. Just treat these items as the appetizers and desserts of your energy-saving strategy, rather than the main course.

If you need help identifying the largest loads on your home electrical work, arrange for a visit from an expert electrician today.

This Father’s Day, get out of the tie and money clip routine with 15 bright gift ideas that shine a light on Dad’s favorite past times. Is your dad a grill master, an adventurer, an artist or a hardcore movie buff? Or is he one of those guys that has his own personal style that can’t be nailed down to just one? Whatever the case, chances are good that we’ve got a lighting gift to match his style:

Ever noticed a slight spark when you plug in an appliance? Maybe a bittle blue zip of electricity with a hair dryer, or a hand blender. If you’re not especially technology-savvy, this phenomena may give you a little fright! After all, when it comes to electrical appliances, wiring or equipment, everyone understand that when the sparks start to fly, it can be scary. So what causes a sparking outlet? Is it normal? Is it dangerous? Answers to questions like these and much more follow!

At Kolb Electric, we understand outlets to a tee. Allow us a moment of your time to teach you about outlet sparking, it’s causes, and when it’s time to be concerned!

To understand sparking and its causes, it’s important to know a little bit about how an outlet operates. You can essentially think of an outlet as a supply line, doling out the electricity allotted to your home in measured quantities per-circuit. In the United States, our outlets run a high, fast and hot current of around 115 to 240 volts.

The important thing to know about sparking is that in actuality, it always happens when you plug in an appliance. That fast, hot current floods the plug at the moment of contact, and for a split-second the connection is being established. This forms a spark! It’s just that normally, you either don’t see it, or it doesn’t persist.

As an important note, we at Kolb would like to say that any time you feel threatened or concerned about your electricity, contact a professional or the fire department. We don’t want to see you in dire straits, and assisting you is what electricians like us are here for!

Having said that, generally speaking, sparking outlets are a cause for concern if:

To prevent issues like these from arising, keep an eye on your outlets. If they get old (even five years can be reason to have them checked), consider having them replaced or serviced. As years wear on, the connections can loosen, causing arcing and large sparks. If your outlets are located near possible sources of water, have GFCIs (Ground Fault Circuit Interrupter) installed for added safety.

At Kolb, our primary goal is always the safety and satisfaction of our consumers. You guys are important to us, and if we can help keep you safe, you can be sure we want to do all we can! Call on our master electricians today if you have any concerns regarding a sparking outlet, or if you have any other electrical concerns!