A bad circuit breaker is a major inconvenience, but there can be other issues at play when your power supply isn’t working the way it should. Breakers protect you and your home from current overloads and other electrical issues. If the circuit gets overloaded, the breaker will trip, cutting power to eliminate the risk of fire. Sometimes a breaker will trip even when there is no overload, but it can be tricky to figure out which situation applies.

If you think you have a bad circuit breaker, look out for the following signs so you can get the problem taken care of quickly.

If your breaker is tripping, it could mean there is a device on the circuit causing an overload. Identifying what circuit the breaker is protecting can help you figure out if the problem is with a device or with the breaker itself. There might be a label on the breaker panel that gives you this information, but if not, you can figure it out by testing your lights and devices. If you disconnect the devices connected to the circuit and try to reset the breaker again, the outcome will confirm whether you have a faulty breaker. If it still trips even without the devices connected to it, it is defective and needs replacement.

Although most electrical fires start very small, they can quickly spread into almost unmanageable proportions. This is especially true if the fire starts behind your walls. This can lead to a fire becoming very large before you even realize that it is there. Your best protection against an electrical fire is to prevent it from happening in the first place. If you must deal with one, however, you should always be prepared to take the proper course of action. Whenever faced with an electrical fire, your own personal safety is the number one priority. If the fire is too large for you to contain, or is growing too quickly, evacuate everyone out of the home immediately until a fire crew can make the area safe again.

If you are in a position to control the fire, start by shutting off all power to your building. Simply go to the electrical panel and shut off the main breaker until the fire is under control. If you do not already know where this is, find its location and make sure that it is never blocked or obstructed. Once the power has been shut off, you can attempt to smother the fire with a Class C fire extinguisher or baking soda. Do not ever throw water on an electrical fire. Water conducts electricity, which can result in you or someone else becoming electrocuted. Whenever the fire has been controlled, do not turn your electricity on until an electrician in Pasadena has inspected your wiring for safety. The last thing that you want is for a second fire to occur in the same place.

When it comes to using electricity in your home and businesses, your safety is more important than any other factor. Learn how to use your electrical system safely so that you can avoid any electrical fires, shocks or other mishaps. For more tips and information on fire safety and services, visit The Electric Connection website at www.theelectricconnection.com/.

Are you looking for ways to cut down on energy usage? Wanting to reduce power consumption is a very common thing, whether it’s to save money, or in an attempt to reduce your carbon footprint. The most common ways people save electricity are by toughing out the heat or cold by not using their AC or heater and by turning off the lights whenever they can. There is a much simpler, convenient way to save energy however.

According to many studies lighting tends to be a fairly large chunk of the average family’s utility bills. Even when lights are turned as often as possible, they can still take up around 12% of the bill. Replacing standard bulbs with fluorescents can save a lot of money over the course of a year on electric bills. In fact, studies show that replacing even just five light fixtures can save the average family over $50 a year. If you need more information about fluorescent lighting or need assistance installing it in your home, contact your local electrician. Pasadena residents can rely on The Electric Connection to answer questions about lighting options.

Fluorescent bulbs tend to be more expensive to buy, but don’t let their price tag scare you away. They are much more energy efficient than regular bulbs, and also last 5-6 times longer than them as well. This means that in the long run they will actually be much cheaper than a standard light fixture.

Although they are more expensive than a regular bulb on the store shelves, it is well worth the investment. The Electric Connection will have a trained and certified electrician in Pasadena ready to help you with any questions you might have about fluorescent lighting. They can also help anybody in need of more energy savings by creating an energy savings plan, which could include fluorescent lighting or other power saving techniques and equipment.