Holiday lighting products have evolved into a much safer product over the years.  With the development of properly sized wires and fuses and LED lighting to reduce the consumption load and the heat the lamps produce, holiday lighting has never been more safe.  In the past people would take the old C style lamps and hook one string of lights into the other.  Often overloading one the strings or the weakest link.  This overload would often melt wires, create sparks, and in some cases even cause a fire.  The manufactures and improved safety standards and testing, help reduce to the chance of an overload by installing a fuse at the starter end or male end of the light string.  This fuse would blow or trip when the load became greater than the fuse capacity, which would then project the wire from the overload.  It is always recommended to install lights that are interconnected (one light string plugged into the other) to manufacture specifications as listed by there instructions.

LED or light emitting diodes have not only made holiday lighting more efficient but even safer.  The old style C7 and C9 lamps could reach temperatures of up to 350 degrees.  The hot lamp if rested against wood or dry Christmas tree, has the potential to ignite the material from the heat the lamp produces and cause a fire.  With LED’s to replace the old style incandescent lamps the chance of fire from heat is almost non existing.  However, it is still possible to cause a fire from electrical spark or short.  These sparks or shorts produce heat much greater and can easily ignite flammable material.  Sparks or shorts are often caused by frayed or damaged insulation on the electrical wires and also loose connections.  It is important to inspect your holiday lighting for damaged or loose components and replace when needed.  Be sure not to use any damaged equipment and immediately discard them to eliminate the chance of future use.

A common mistake made people make with holiday lighting is to plug to many holiday lights into each other.  UL listed holiday lighting and cord splitters are tested to specific tolerances and should only be installed to manufactures specifications.  The easiest location to find the manufactures is specifications is to look at the tag on the cord most commonly found near the male end of the cord or light string.

If enough standard wall sockets are not present and you must plug in multiple cords, it is highly recommended to install a plug switch with a built in overload device to reduce the risk of overload.  The built in overload should not be mistaken for a surge protection device.  A surge protector reduces or eliminates the excess voltage going to the device plugged into itself.  Where an overload device will shut off power at the point of installation if to much power is being drawn through it.

On many new homes we will install plug ins located in the soffit or eve to reduce or eliminate drop cords for holiday lighting.  These soffit plugs are installed on a special heavier 20 amp circuit and often include a convenience switch located inside the home to shut the lights on / off as needed.  The special circuit makes sure your holiday lighting is not installed on regular interior circuits so the chance of variable loads and overloads are dramatically reduced.

Permanent holiday lighting can be installed by a licensed electrician.  The most common type of permanent holiday lighting is LED strip lighting.  These are can be installed on the under side of eves or soffits for a permanent installation.  Depending on the type of LED holiday lighting you choose you may even have the option to change the colors of the lights with a push of a button.  This allows the holiday lighting to be used for many occasions throughout the year.  You can call today or schedule online to have a lighting specialist come to your home or business and provide you with a written no obligation quote.

The proud owner of a generator, whether for general use or use in an emergency, can rest assured that they have access to the power they need. But what if your generator isn’t quite up to the task? This can leave you with no means to perform normal functions at best, and at worst could leave you powerless in the face of a storm or other catastrophe. The certified experts at Kolb Electric have a strong history of handling generators, and today we bring you one of the most common complaints among generator-owners: power surges.

When it comes to communicating signs of disrepair, generators are actually rather talkative. It’s all in understanding the signs, the most common of which coming in the form of surging.

Surging refers to a generator (or other electrical component, machine or device) displaying clear fluctuations in behavior at intervals. These intervals can follow a clear pattern, or can be completely random. What exactly does this mean? Let’s use some examples.

A surging generator often will leave lights burning much brighter, then much dimmer rapidly, causing a sort of flicker back and forth. In machinery, this can also come as drastic changes in pace as well; such as a fan running faster and then slower for no obvious reason.

There are actually numerous causes for generator surging, including:

Bottom line; if your generator is experiencing surging there is definitely something wrong. The causes are myriad, but the solution stays the same. Seek professional assistance for your generator repair to ensure it’s ready and available when you need it most!

At Kolb Electric, we’ve been handling generator installation, repair and replacement for years, and we always bring our very best to any project. if you’re experiencing generator surges, don’t hesitate to contact us right away!

Outdoor lighting of many varieties can effectively keep your space well-lit, safe, and inviting for you and your guests. These lights are typically reliable and long-lasting, but if they stop working and leave you in the dark, it can be a frustrating experience. Having an understanding of your lights and their potential issues can help you if you need to conduct outdoor lighting troubleshooting. There are several types of outdoor lights, all with different looks and objectives. Spotlights provide bright, direct light onto a specific area. Uplights are installed at or below ground level to shine upwards onto objects while downlights are installed high in a tree or structure to shine down. Floodlights use a motion sensor to shine directly onto an area when they sense someone there. Path or walkway lights are installed as individual fixtures along a walkway to illuminate it. Solar lights gather energy from the sun throughout the day, then turn on at night. These lights are installed in a variety of areas such as on a home; on a deck;  around a patio, deck, sitting area, or pool; or on the ground. There are also a variety of bulbs including halogen, incandescent, LED (light emitting diode) and bug light, each with their own uses and benefits. Each of these fixtures has several parts and can be susceptible to different issues depending on their parts and assembly. If your lights aren’t working properly, it can be concerning, and create potentially dangerous situations.

water and vinegar to remove residue and keep your lights shining brightly.While some outdoor lighting troubleshooting can easily be done on your own, outdoor lights are complex fixtures that aren’t always easy to diagnose and fix.

When you own a home, it’s easy for household expenses to spiral out of control. Every year, the average homeowner is in the unenviable position of spending thousands of dollars on owning and maintaining a home- and that’s just when everything is going well! If an emergency hits, many homeowners have to make sacrifices they can ill afford just to keep the home up and running. The best strategy to avoid disaster is to work on cutting down the everyday household expenses associated with owning a home.

So where does the money really go? On average, American homeowners spend about 34 percent of their income on home expenses. Paying for the house itself, of course, is the largest chunk of that expenditure, but does it surprise you to know that utilities make up the next largest amount? Most Americans spend about seven percent of their income on utilities; that’s more than what they spend on entertainment, clothing for the family and even health care! Obviously, that’s an area where it makes sense to find ways to scale back. If you live in Texas, it’s even more important than it is for people in other states as Texas electricity rates are 30 percent higher than rates elsewhere.

To save money on electricity, you need to understand it. Electric companies measure energy usage in kWh, which is a measurement of the hours you spend using 1000 watts. By lowering your kWh, you will, of course, lower your electricity cost, but where do all those kilowatt-hours go? Appliances can be huge energy hogs but so can game systems, televisions and computers. Older homes are often ill-equipped to handle the energy demands of a modern lifestyle, and this can be not only costly but dangerous, as faulty electrical systems can lead to house fires. Modernizing your home can save on more than just household expenses- it might also save your life.

Fortunately, there are some easy ways to save on energy (and its associated costs). If your home is more than 20 years old, get your electrical system checked out by a professional to determine if you need any upgrades. Buy ENERGY STAR compliant appliances whenever possible, and turn off anything you’re not using, from lights and appliances to your Xbox 360.