Modern day living is highly reliant on the use of electricity and the different appliances, equipment and fixtures it powers. Industries are even more reliant on electricity and their profitability is closely knit with how seamlessly their systems operate. They rely on electricity to such an extent that they rarely give it a second thought; well, at least not until something goes wrong such as:

Most of these problems can be attributed to poor power factor. Let’s understand a little more about what that is.

Power factor is essentially a measure of how effectively the incoming power is being used by the electrical equipment on your premises. It is expressed in terms of a numerical value in the range of 0-1. A higher power factor indicates that the electrical equipment is being used more effectively.

For instance, if the power factor is 0.8, it indicates that 80% of the power supply to the equipment is being utilised effectively and that 20% is being wasted. Regardless of what this ratio of effective usage Vs wastage is, the latter is an unnecessary expense. Typically, your power factor should be closer to 1; it indicates that your site is using energy in an efficient manner.

A number of businesses are currently being charged a kVA tariff and not a kilowatt tariff. This means, your service provider is probably charging you for the power they supply to you, rather than that you actually use. Simply put, you are paying for power that is being supplied to you, but which is being wasted. If your business has a low power factor, it means you pay even more for this waste. There is another aspect you should keep in view. As mentioned at the start, poor power factor has the potential to cause power drops and power losses; in turn, these lead to motor failure and overheating and failure of other equipment too.

Installation of Power Factor Correction equipment might just help avoid prohibitively expensive infrastructure upgrades; it does this by reducing the current electrical demand on your system & improving the efficiency stability. Based on which tariff you are on, power correction might just prove to be an excellent way for your business to deescalate its electricity costs.

The power factor can be improved by installing Capacitor Banks. These are PFC (Power Factor Correction) equipment and help correct the inefficiencies in the energy supply. Apart from this, they also reduce the peak demand on the power network. This is an effective and cost-effective solution to reduce your power bill as it helps lower the monthly demand and the capacity charges. Generally, the payback periods for PFC are between 1 and 3 years. Taking the life span of the PFC equipment into consideration & the potential savings, this investment can prove to be very worthwhile for you.

If you feel that you are paying too much for electricity, we at Allround Electrical can conduct a survey of the equipment used on your site and map their electrical consumption against the power your plant is using and is being charged for. We will then provide you a report of what your power factor is; and if it is low, how it can be corrected. For more information, call us at 1300 169 263. You can also drop us a line via email.

Thanks for reading,1300 169 263

These systems are still expensive compared to the conventional electric generating plants such as hydro. And since they only generate power during the day, batteries or other storage systems are required to ensure power availability during the night or times when the conversion is low. This means spending more on batteries, which are currently the most popular storage devices.

Another limitation is the intermittent nature of light, making the energy unsuitable for some applications.

Space limitations may influence the maximum power that a consumer can generate. The cheaper panels have a lower conversion rate and require larger areas. However, customers may overcome this by using the more expensive but higher efficiency panels which require less space.

Improved photovoltaic technology, mass production and lower installation costs have seen the cost of photovoltaic systems and components such as batteries fall rapidly. Incentives such as financing, rebates, and wide acceptance by homeowners have influenced the use of the photovoltaic cells.

Working with thousands of homeowners as a Top Dallas Electrician, ElectricMan Inc. has taken part in just about every home improvement project you can think up. Unfortunately, many homeowners’ plans for their dream home makeover have been put on hold due to a lack of funds. Fortunately, there are things that you can do to perform an Affordable Home Makeover for a lot less than you might think.

By far, the most dramatic way to change the look and feel of your home, without a complete makeover, is by simply changing the way it shines! The lighting in your home plays a huge role in the first impression that you get when you walk into a room, and can be one of the major determining factors in setting the ambiance and overall feel of the room. By installing the proper recessed lights and pendant lights, along with chandeliers in your home, you will be able to accent the existing décor you already have.

Recessed can lighting will clean up your ceiling and do away with unsightly light fixtures installed everywhere.  When installing a recessed can, the type of trim is essential to maximizing the amount of light that you can get in an area.  A baffled or recessed trim will create a spotlight effect, whereas a flush mount trim allows the light to start at the ceiling and move throughout the room.  This gives a much more even look upon finished product.  Any electrician that has done a lot of installations should be able to guide you in the proper direction so that the style of lighting that you are looking for will be achieved.  Be careful attempting these by yourself, drywall will need to be cut for installation, and you never know where a wire or plumbing pipe may be hiding.

Pendant lighting is also making a big hit right now.  This type of lighting can be used to decoratively light up kitchen islands and kitchen bar-type counters.  This is a creative way to separate your kitchen from your living room.  Typically, homes are not pre-wired for these lights, and wiring will have to be added before they can be installed.  We highly suggest when wiring for these lights, that a new switch leg be installed for independent control.  As always, installing new wiring to your existing electrical should be done by a top Dallas electrician.

Depending upon your tastes in furniture, replacing a living room of furniture can cost ten or twenty thousand dollars! Updating the lighting in the same room can drastically change the look and feel of the room, often for less than one thousand dollars. Replacing lamps and old fixtures with recessed can lighting and a classy chandelier can transform a dim dreary space into a room that you can be proud of. Switch out the chandelier with a nice ceiling fan that compliments the room, and you can even do your part in going green with the energy savings that come with using a fan to circulate the air in your home instead of relying constantly on your energy hogging air conditioning system!

If you need some help in creating your own Affordable Home Makeover by replacing the out of date lighting in your home, contact Top Dallas Electrician, ElectricMan Inc. to discuss the options available to upgrade your home. Feel free to contact ElectricMan Inc. by phone at 972-792-7270, or through the contact form on our website at www.electricmaninc.com.