Electrical troubleshooting in Fairfax, VA can help fix those electrical problems that, while perhaps not perceptibly major, can seriously hinder the performance of your home’s electrical fixtures. We’ve all had that one electrical problem in our homes that never seems to go away, leaving us in a state of constant frustration. At the worst, these problems can impact how we function in our homes on a daily basis, and even pose a threat to our safety.

/foot)

Strips with more LEDs per foot will consume more power.

In short, if maximum energy efficiency is what’s most important to you, choose a light strip with smaller LEDs and fewer LEDs.

In order to ensure your LED power supply doesn’t overheat and fail prematurely, we use this general rule of thumb:

Make sure the total wattage of your LED strip lighting is at least 20 percent less than the power supply’s rated wattage.

For example, if you have an LED strip light that requires 80 watts of power to run, you’ll need a power supply that’s rated for at least 96 watts.

The vast majority of our strips include wattage per foot right on their product pages.

power supplies range from six watts to 1,500 watts for compatibility with a wide variety of LED strip lights.

Let’s take a look at an example:

It’s important to verify that the voltage of the power supply you choose is compatible with the voltage of your LED strip lighting. Also, be sure that the power supply’s input voltage matches that of the location it will be installed in. If you have an LED strip with 12-volt DC operation that you wish to use in a 120-volt AC home wiring system, you’ll need a power supply that includes 120 volts in its input range and has 12-volt DC output.

Another factor to take into account for longer runs is voltage drop. A significant voltage drop is present after a certain distance of LED strip. After this distance, there will not be enough voltage present to light the next length of strip. This varies depending on the type of strip and length being used. Usually, a single-density strip (nine or less LEDs per foot) will need to run back to a power source every 32 13/16 feet (10 meters). A high-density strip (18 or more LEDs per foot) will need to run back to a power source every 16 3/8 feet (5 meters). Please refer to “Max Run” in the specifications table of the strip light to determine how many can be run continuously without a parallel run back to power.

3) the 4) if you want your strip to be dimmable

power supply calculator on the product pages of all of our LED strip lights!

There are a few steps involved:

Step 1: Select your strip and the length you need.

Step 3: Click the green “Power Supply Calculator” tab, and select your product by choosing it from the list OR by pasting the exact part number in the search bar.

Step 4: Enter the number of strips at the desired length you’ve selected and voila! You’ll see a list of all compatible power supplies with the best match at the top of the list!

When dealing with electronics, safety is paramount, and you want everything to work like it’s supposed to. So if you’re still not sure which power supply to use for your LED strip lighting project, just reach out to our technical support team or customer service department at 866-590-3533. Our teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Season’s Greetings from Kolb Electric, and a Happy Holiday to all! It’s about time to deck the halls, but before you do, our experts wanted to chip in and offer a little advice. The holidays are a wonderful time of the year, but with all of the hustle, bustle, decorating, and general chaos, safety occasionally falls by the wayside. Don’t let this happen!

At Kolb Electric, we take the safety and security of our customers very seriously. We want to be called on for repairs, replacement and installations, any time, any day. What we don’t want is to hear about our customers encountering dangerous electrical situations that could be avoided with a little know-how and understanding. Keep yourself and your family safe from electrical burns when handling your holiday lighting this year with these general safety tips.

Despite all preparation, and beyond our control, occasionally accidents will happen. In the event of electrical burns, a quick and informed response is crucial. Immediately report to the emergency room if the injured experience:

Electrical burns can pose a very serious threat if left untreated. Even if the injured displays none of these signs, it’s best to seek medical treatment right away.

The majority of all homes and businesses get their electricity from the local electric grid. Although this is very convenient, it can be a burden whenever there are issues that cause either a short-term or long-term outage. Extreme weather, for example, can leave your home without power for days or even weeks. While this is annoying for everyone, it can be dangerous under extreme temperatures or for anyone who needs to keep medical or other vital equipment running at all times. You also run the risk of spoiled food as a result of your refrigerator no longer running.

A standby generator is a device that was developed to make sure that you still have electrical power at your home or business whenever the electricity from the utility company has failed. Rather than placing all of your faith on the traditional electric grid, these generators allow you to get electricity by burning a fuel such as natural gas, diesel or propane. Depending on the size of your standby generator, you can expect your generator to work for several hours, or even days at a time. Your only real limit is the source of your fuel. If you have to stop and refuel your generator constantly, you must keep in mind that you only have a finite fuel source that may be difficult to replenish. If your generator hooks directly into your natural gas utility, you can likely run the generator continuously.

In most cases, an electrician in Glendale will connect your standby generator directly up to your electrical panel. A transfer panel is used to detect whenever there is a power outage. Whenever this occurs, your generator is designed to turned on automatically so that you have very little loss of power. To learn more about standby generators, or to talk about having one installed, call one of our technicians at The Electric Connection. You can also learn more at our website www.theelectricconnection.com/.

Spring and summer are traditionally the busiest shopping seasons for potential homeowners. With the current housing stock dwindling as buyer demand increases going into the warmer months, a seller's market has emerged across the country, giving residents looking to unload their current properties the upper hand in negotiations. However, even with the advantage laying in the hands of owners, a closing can still get derailed - or at least made less-than ideal for a seller - when a buyer hires a home inspector to come investigate the property.

In many cases, these contractors will unveil deficiencies in the property that even the homeowner didn't realize existed, causing the prospective purchaser to demand a slash in the asking price. Often, the amount of money that these home inspections cost the seller on a closing exceed the price it would have cost them to be proactive about minor fixes in the first place.

Before putting your home on the market, have a home inspector come in and evaluate your property to check for the deficiencies that potential buyers will be watching out for. Simple things like the water heater being outdated - or even not positioned correctly off of the floor - can be caught, allowing you to preemptively address them before the open house.