Every year, dozens of people are injured as a result of unsafe conditions created by faulty electrical panels. With winter fast approaching and more people plugging in space heaters and turning on heating systems, this is a perfect time to go over a few ways to make sure your electrical panel is working properly. Be on the lookout for the following signs that your panel is overloaded:

By this, we mean both full-on outages and things like tripped breakers and flickering lights. Your electrical panel is designed to handle only so much, and if your breakers trip frequently, this could be a sign that you’re overloaded. Storms with heavy rains, wind, and lightning can also cause panels to temporarily overload.

Sparks when you go to plug something in or coming directly from the panel are a sure sign that something is seriously wrong with your panel. As soon as you see one, turn on the power and examine your panel for burning smells or indications of smoke. Even if you don’t see any, call an electrician just to be on the safe side.

It’s natural for things like switch plates, wall outlet covers, cords, even plugs to get a little warm when current is flowing through them. If they get too hot to touch, however, this is a definite sign that something is wrong. Cut the power and contact an electrician as soon as possible.

If you can hear buzzing sounds coming from your electrical panel, there may be an overload or you may have worn parts in need of replacement. The buzzing can be a sign of mechanical vibration or electrical contacts arcing. It could also be coming from the bimetallic strip that trips the breaker.

If the insulation material on any of your wiring is cut, damaged, or cracked, this can be an indication of an electrical current overload. As soon as you notice this, replace the wiring—it can be a major fire hazard.

Electrical fires increase significantly during the winter, so now is a perfect time to take a look at your electrical panel and make sure it’s operating safely. And if you need electrical maintenance in Maryland, DC, or Virginia, call Kolb Electric today!

Even if your electric bill isn’t really a problem for you, just imagine what you could do if you shaved it down just a tad. A few more dollars in your pocket could be put towards your retirement nest egg, save up for that new big screen television you have been wanting or maybe just going out for a nice dinner. It is your money, do as you please. There are always ways to save here and there and your electrician in Pasadena has a few simple tips you can start doing today, to get you one step closer to that nest egg. The Electric Connection has been helping customers for years with energy savings.

1-Cook with small appliances when possible. Use a toaster oven, skillet or slow cooker. 10. Use a timer to control outdoor lighting to only come on at dusk and turn off at dawn.

These are just a few tips. You can call The Electric Connection to begin saving money today by installing a ceiling fan and dimmer switch.

One of the main stays in Industrial and Commercial Lighting has been the Metal Halide Bulb. It is common in Indoor Fixtures, such as High Bays, Canopy Lights, Garage Lights and Low Bays. It is

So you have a Metal Halide (or even High Pressure Sodium) light, and you want to convert to LED. You’ve done your research, you’ve been inundated with marketing materials that tell you what is the most important thing to consider (coincidentally it probably is something they think is important). And now you are left to make a decision. New or retrofit? What new versus retrofit. We sell both. Our retrofits perform as well if not better than new fixtures, but not all retrofit kits can make that claim. However, if your fixtures are old, leak, and have seen their better days, then by all means replace them. It does not make sense to buy a new fixture that includes a retrofit kit inside of it like some vendors will try and sell you. The engineering of some of the new fixtures are fantastic. However, the real reason you would want to consider retrofitting is because you have a significant investment in fixtures. Why not keep that investment? Retrofitting is extremely cost effective, especially our Look for the DLC Premium Symbol, it’s different than the DLC Standard symbol. And that gives you the quick notification that the light you are looking at is the most efficient.

And why does that matter. It’s simple. It will save you a lot more money. Let me do three comparisons for you. First a retrofit kit designed at 97 lumens per watt to replace a 400W Metal Halide bulb, a second at 102 lumens per watt and ours at 155 lumens per watt. Lets keep everything else the same. Cost of electricity, hours of use. The only thing different you will notice is the watts consumed and the lumens produced. For the record, our retrofit kit uses the least amount of energy in this test BUT also produces the most amount of light. We will use 12 hours a day operating time and .12 kw.h electricity cost

Calculation 1: 97 lumens per watt retrofit head, 135 watts, 13164 lumens

Savings per fixture per year over 400 watt Metal Halide: $170.82

Calculation 2: 102 lumens per watt retrofit head, 143 watts, 14600 lumens

Savings per fixture per year over 400 watt Metal Halide: $166.62

OK, so between the competitor options, you are neck and neck, the difference is so minimal you can make your decision based on whose website you like more

Calculation 3: 155 lumens per watt retrofit head, 100 watts, 15,776 lumens (this is our LED Retrofit Kit)

Savings per fixture per year over 400 watt Metal Halide: $189.22

So there is clearly a $18.40 savings over the first LED retrofit option and a $22.60 savings per fixture over the second LED Retrofit option. And, we produce more light!

We have 3 mini LED Retrofit Kits, 30W, 45W and 60W designed to replace up to 250W Metal Halide. We have 3 standard sized retrofit kits, 75W, 100W and 120W designed to replace from 250 Watt to 400 Watt Metal Halide. We have 2 Large Retrofit Kits, 150W and 200W, designed to provide more light than a 400W Metal Halide up to 750W Metal Halide. And we have 3 Extra Large retrofit kits, 280W, 320W and 350W, designed to replace 1000W Metal Halide.