Let’s say your teen is using an electric drill outside and standing with bare feet in a puddle. Not a good idea. Let’s say the drill malfunctions and leaks electricity out of its proper circuitry. Electricity takes the path of least resistance, which just might be from the drill, along arms and legs, and into the puddle. If the drill were plugged into an ordinary outlet, this could be a fatal accident.

In recent years, the National Electric Code has included requirements for special safety outlets where such accidents could happen. These special outlets are called “GFIs” (Ground Fault Interrupters) or “GFCIs” (Ground Fault Circuit Interrupters) — two different names for the same thing. They are required by the National Electric Code in garages, kitchens, bathrooms, pools, spas, and in some other outdoor areas where water could be present. The Electric Connection, your local Glendale electrician, can check all of your outlets for you and replace or install new GFCI’s.

A GFI, or safety outlet, detects that the current in an appliance is no longer flowing in its proper circuit. It shuts off the current within milliseconds. In the case of our teen, if the drill were plugged into a safety outlet, electrocution would be avoided — a life saved.

GFIs look different from ordinary outlets. They have two buttons labeled “Test” and “Reset.” You can check that the outlet will cut off current when needed for safety by pressing “Test.” Test should shut off current to the outlet so that the outlet no longer provides power. After the test, you can restore current to the outlet by pressing “Reset.”

Newer GFIs also have a tiny green indicator light that tells you that it’s providing power. This is a handy feature when you conduct your test. It’s also handy because from time to time, safety outlets may be triggered without your knowledge and may no longer be providing power. The absence of the green light will alert you to this situation.

A Downside

This is the downside of safety outlets — they can be tripped without your realizing, or they can become faulty and can trip repeatedly for no reason. Let’s say you have an electric toothbrush charger plugged into a safety outlet in your bathroom. The outlet has somehow been tripped and no longer provides power. If it’s equipped with a green indicator light, the light will be off. In any case, if it’s lost power, press “Reset” and power should be restored.

Another possibility is that an outlet in a kitchen, bathroom, garage, or outdoor area is not a safety outlet but is “protected” by a GFI elsewhere in the circuitry. If a non-safety outlet in your house has lost power, you can check for this situation by making sure that all the GFIs in your kitchens, bathrooms, and other areas have not been tripped and are still providing power.

Home Safety Check

Check that your kitchens, bathrooms, garage, and outdoor areas are equipped with working GFIs. (Refrigerators are incompatible with safety outlets and should not be plugged into one nor protected by safety outlets elsewhere in the circuitry.) If you have GFIs, remember that they have a limited lifespan, so press the Test button of each at least once a month to check that they shut off power as designed.

If your home doesn’t have safety outlets or they are no longer working, call a qualified electrician to get an estimate for installation. GFIs are a relatively inexpensive investment in your family’s safety.

Click here to read more.

Each process of construction is directly or indirectly related to the other, so having a bit of knowledge about each one of these is imperative even if you specialize in only one.

From a contractor’s perspective, the construction of a house can be divided into two main phases: wet and dry. The wet phase refers to the initial phase when the house is unprotected from moisture caused by external forces such as rain, while the dry phase is the phase when most electrical work is carried out as the interior is safe from rain and snow.

On the other hand, from an electrician’s perspective, the two main phases of construction include phase one – the rough in, and phase two – the finish. This division is based on the stage of finishing that the walls are at. Here is a step-by-step guide into how the electrical work is carried out during the construction of a house:

Since there is a lot of machinery that operates on electricity and there is no electricity connection at the construction site, a temporary electric pole is installed during this stage.

Capitol Lighting Offers Green Ceiling Fans and Energy Efficient Lighting Solutions for your Home!

You don’t have to sacrifice style when you select energy efficient lighting for your home. Capitol Lighting offers sophisticated lighting designs and green ceiling fans from such makers as Casablanca and Monte Carlo Fan Company.  Get high quality energy efficient lighting from Minka Aire and Hunter Fans too.  Being Green, when it comes to lighting your home, is easy with hundreds of energy efficient lighting styles and designs to choose from at Capitol Lighting.

As you walk around your house trying to find ways to save a few dollars here and there on your electric bill, you may be overlooking the obvious. Your current light bulbs. You have probably seen the more expensive light bulbs in the spiral shape in the stores but may have passed over them in favor of the less expensive bulbs. Your electrician in Glendale is here to tell you, you may be costing yourself more money by choosing those cheaper bulbs.

The experienced professionals at The Electric Connection can answer any questions you have about energy savings. One of the easiest things you can do is to start changing out your current halogen bulbs for the more energy efficient Compact Florescent Bulbs or what are simply referred to as CFLs. A CFL uses 75 percent less energy than the old standard bulbs.

Your light usage in your home probably accounts for maybe $20 on an average $100 monthly electric bill. So, if you replace each of your current energy hogging bulbs with CFLs, you could potentially safe about $15 on your electric bill. While that is not a massive amount of savings, it will certainly add up. Don’t be fooled by the word florescent. There is no eerie yellow or green glow. They are available in a variety of colors depending on your preference. If you have more questions, you can ask your electrician. Glendale residents may also want to consider replacing outdated lighting fixtures with more modern energy efficient fixtures.

This is a job for a certified electrician. While there, the electrician can install dimmer switches on lights that do not need to be at full power all of the time. These dimmers give you the freedom to have just a little light or a lot, depending on what your needs are. Call The Electric Connection today to learn more about dimmer switches and how they can help you.