By Clarissa Allison | January 30th, 2015

RAB Lighting’s rectangular shaped LED Future Flood lights are designed to replace Metal Halide lights. The patent pending airflow technology ensures a long LED and driver lifespan. These fixtures are used for building facade lighting, sign lighting, LED landscape lighting and instant-on security lighting.  Following are the specs on the FFLED39 fixture.

LED Info Watts: 39

Color Temp: 5100k

Color Accuracy: 68 L70

Lifespan: 50,000 LM79

Lumens: 2,991

Efficacy: 66 LPW

Driver Info Type: Constant Current 120V: 0.4 A 208V: 0.25 A 240V: 0.22 A 277V: 0.19 A

5 Year Warranty

This cutting edge fixture comes complete with three multi-chip, 13Watt high performance LEDs.  It contains superior heat sinking ability with external Air-Flow fins. In electronic systems, a heat sink is a passive heat exchanger that cools a device by dissipating heat into the surrounding medium. It has high-temperature silicone gaskets, and a chip and fade resistant powder coat finish.

Your light will also have a heavy-duty mounting arm with an O ring seal and a stainless steel screw to aid in easy installation. The fixture is suitable for mounting within 1.2M(4FT) of the ground.  Its UL Lighting also makes it suitable for wet locations.

RAB LED products exceed industry standards for chromatic stability. RAB’s range of CCT (Correlated Color Temperature) follows the guidelines of the American National Standard for (SSL) Products, ANSI C78.377-2008. RAB LED luminaires have been tested by an independent laboratory and have received the Department of Energy Lighting Facts label.   The FFLED39 complies with California Title 24 building and electrical codes.

Are you still using incandescent light bulbs? Your electrician would recommend a different course. Efficient lighting technology has blown up in the last few years, and advanced technologies are just getting better. Light emitting diodes, or LEDs, are at the forefront of modern lighting thanks to their inexpensive and long-lasting luminescence. Some of these new diodes are leading the pack in must-have lighting features, including smart home integration that you can control with your phone. Read on to learn more about the latest in LED technology.

Upfront Costs are Dropping

One of the biggest complaints about early LEDs was the price. Almost any LED will save you money over time compared to an incandescent bulb, since they use 25 to 80 percent less electricity and can last up to 25 times as long, but many consumers balked at paying the $35 or higher retail price for a single bulb. Newer models, however, can recreate the look of that classic 60 watt incandescent bulb with fewer LED panels, meaning they are cheaper to produce and sell for $10 or less.

Options are Expanding

Other common complaints about the first LED models were that the warmth of the light wasn't quite right and they didn't work with accessories like dimmers. With today's technologies, however, you can find LEDs that give off almost any color and lighting profile, allowing you to mimic the look and feel of your old incandescent bulbs or tailor your room to fit more eclectic tastes. Not every LED is compatible with standard dimmers yet, but many are – just check the label on the box to make sure.

Make it a Smart Bulb

Many new LED models are designed specifically to work with smart technology. That means you can control them from your phone no matter where you are, set up a schedule for them to turn on and off, and even have different colors or light intensities at different times. Newer bulbs are also optimized to work with your other smart home systems to move you closer to a goal of integrated whole-house control.

Turnkey Functionality

One of the biggest advantages of upgrading to LEDs is how easy it is. There's no need to hire an electrician to set up new wiring or fixtures – the bulbs screw right into the pre-existing bases, out of the box. If you want tips on how to make the most of your new lighting options and create the room profile that fits your home, however, don't hesitate to call up your local electrician for guidance and advice.

Holidays are a known time for seeing friends and family, some of whom you may not be able to see often throughout the rest of the year. A hobby some people love during the holidays is to add decorative lighting to add a warm welcoming appeal to their homes. Whether your lighting is serious and somber to show your religious beliefs or fun and playful to reflect your personality, there are a few things to be aware of with the extra power draw your decorations put on your house.

Tech Specs and Electrical Engineering

When the public electric line reaches your house, it runs to a circuit breaker (or fuse box in older homes) to prevent dangerous levels of overload which could cause a shock, and the breaker is designed to automatically shut off if a dangerous level of electricity is reached with a surge or if too many appliances are run. There are exceptions, but most circuit breakers are designed to handle 15 amps, or a little over 1600 watts of power which is plenty for modern appliances.

The Simple Terms: When You Run Too Much Power

When you overload a circuit breaker, it becomes a nuisance as everything running on that line shuts down. It's not normally a daily occurrence, but usually only happens when something exceptional occurs. Running too many kitchen appliances at once, for example, can overload a circuit breaker, as can running a space heater or power tool on a line already being used. A common cause of circuit failure is when you've never had a problem running a hairdryer and curling iron until a guest in the guest bath turns on a second hairdryer. Holiday lighting usually runs on a low power supply but adds up when layered and can cause problems with a line which is already near its maximum usage levels.

The Layman's and the Professional's Solutions

When you are getting any electrical work done in your home, you want to make sure that the job gets done in the best possible way and that the best materials and workmanship are used in the work too. This is exactly why you conduct a certain amount of research online and try to zero-in on a credible and well-established company. However, this can sometimes be easier said than done and you may scour several sites and still not be sure which company you should contact for the work you need done.

We understand exactly how difficult this decision can be and so we have put together this list of things you should consider while choosing a residential electrician:

This isn’t very difficult to decipher. In Australia, when it comes to electrical jobs, the only things you are legally permitted to do are to change your light bulbs & operate the electrical appliances in your home, for what they were designed for. If you need any other electrical work done, beyond that; you would have to hire the services of a licensed and certified electrical contractor. This includes even the small things such as:

Even when you feel that certain jobs are very basic and that you will be able to tackle them yourself, keep in mind that electrical jobs are very risky and dangerous; and a single wrong step can cause an electrical fire and pose a risk to life and property. This is exactly why it’s important to hire the services of a credible electrical company.

They will work safely, use the latest and most advanced testing and work tools and ensure the work is done safely and in line with the applicable legislation in the state. In addition, the work has to be done as per the Australian Standard Wiring Rules. The electrician is also required to provide a certificate of compliance for the work they have handled for you.

In the current day, every state and territory requires that electricians should hold a valid electrical license to carry out any work. Most of the states also require that the electricians be R.E.C’s (Registered Electrical Contractors), before they are permitted to handle any electrical work or run an electrical contracting business.

For more information, simply speak with the experts at Allround Electrical and take their advice on various aspects of CBUS installations. The number to call is – 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263