Depending on the size of your warehouse, as a manager (or owner) of that facility; you probably know that your building consumes a considerable amount of energy.

From your lighting system to your heating and cooling, to make such large buildings meet “workable” conditions can be tough and expensive. Although, this post is here to gather 5 critical ways on how you can meet green initiatives for your companies warehouse operations, all while maintaining those workable conditions your employees require.

By implementing the following ways, you will be able to realize a great reduction in not only energy waste, but also overhead costs associated with powering that wasted energy month to month. So there are two major benefits from all of this; one being you will create a more sustainable warehouse all while secondly reducing month to month expenses associated with operating your warehouse.

Without further ado, here is the first of many on this list of ways to save energy in your warehouse facility…

Imagine how great it would be to have the same amount of light that is outside, inside. Best part? It won’t be coming from artificial lights which cost money to run, but rather a natural light source that costs nothing other than installing skylights for that light to come in. This will easily and greatly reduce the amount of time that you need any type of light on in your warehouse.

Allow sun to illuminate your facility by installing skylights throughout your building!

These days HVAC is nearly installed in every building, including warehouses. Multiple things could be messing up your efficiency when it comes to heating, ventilating, and cooling your warehouse, and they all go back to that HVAC system.

For starters, ensuring that your professional building commissioning company to run a full audit of your warehouse, and they will tell you exactly what you need to work on for your building to be running exactly how it was built to run.

Conclusion

The process of addressing (let alone fixing) these issues and areas of concern may seem overwhelming, but keeping the end goal in mind will make the efforts to make these changes in your warehouse much easier. Taking it one at a time will make all the difference, but ensuring you are working on them overtime will be all that is needed. Just remember, all of these critical ways to reduce energy are going to not only make your company more sustainable, but it will also save you tons in overhead.

Have any other ways to save energy specifically in warehouses? Comment them down below to help out other warehouse managers / owners alike!

Motion sensor LED stair lights let you safely and effectively navigate your steps while eliminating the need for any action. And because they turn off automatically, they also save power! We’ve recently installed these handy little LED stair lights and wanted to share the process with you.

wire that will be needed. It is best to order more than you need so that there’s slack in the line and enough to extend to where your power supply will be mounted.

It’s important to choose the correct wire gauge for the length of wire you need and amount of current that will be flowing through it. The key is to avoid voltage drop, which happens when the supplied energy of a power source is reduced as electric current flows through wire (or any other pieces of equipment that do not supply voltage on a circuit). The longer the run of wire, the lower the gauge of wire needed.

*If you need help determining the correct wire gauge, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

3. Using wiring from the

4. Use a run of wire to join the PIR sensor at the top of your steps with the power supply. You can wire both PIR sensors to the power supply using electrical tape or with

5. Connect your main line to the PIR sensor at the bottom of your steps, and begin connecting each step light with

7. Finally, connect to power.

LED stair lights and

4. Connect your main line to the PIR sensor at the bottom of your steps, and begin connecting each step light with

6. Finally, plug the power supply into your wall outlet.