A common concern for those involved in home renovations or purchasing a new home is, “What is the state of the electrical system in the walls”. Some homes may not have had construction or renovations done since the original – this means the original wiring is still in place. Having original wiring in place can be concerning, especially if it is aluminum wiring. This type of wiring is commonly found in older homes and can be very dangerous. Read on to find out what you need to know about aluminum wiring and the dangers associated with it.

In the 1950’s to 1970’s, many homes were being outfitted with aluminum wiring. The reason for this was because the prices of copper (material normally used for electrical wires) had increased and the use of aluminum would undercut the high costs. Aluminum is also much more conductive than copper and was used in larger industrial/commercial electrical lines like power grids and airplanes.

Despite the reduced cost and increased conductivity, aluminum wiring has many potential issues. Aluminum wiring is much softer than standard copper wiring. This means that it is vulnerable to being broken, cut, and damaged which can leave live electrical wires exposed. Another issue is that when aluminum rusts, it is not as conductive as copper. Copper that rusts can remain conductive and continue its flow of power. However with aluminum wiring, rust in wiring will impede the flow of electricity and can cause a number of other issues. Aluminum also expands and contracts when it becomes hot. This constant flux in size will result in the wires loosening themselves and connections become loose. For all of the above listed reasons, aluminum is prone to overheating and electrical fires.

If you are unsure if there is aluminum wiring in your home, we have listed a number of warning signs that can indicate a hidden problem

Once someone has discovered retrofitting as a read that by clicking here.

Let’s get started with the first question on the list, and that is what exactly is a retrofit kit?

What is a retrofit kit anyways? Well, we’ve actually reducing your energy consumption even more. Just make sure you are buying a LED retrofit kit that has the option to be dimmable, otherwise you will NOT be able to dim them.

Retrofit vs full replacement, why should you consider retrofitting with LED?

While a full replacement of an entire is fixture is very valid to do especially when they are outdated or literally falling apart; often times you can avoid that by retrofitting your fixtures. With retrofitting you get to keep your old fixture but just replace the light source in it with a new one. This will allow you to reduce the costs associated with the lighting upgrade tremendously, which will allow you to realize a much larger ROI.

Although there are benefits of both, you need to think about your facility or buildings own situation, and go from there. To recap; retrofitting is great if you can keep your old fixtures but if you can’t (due to reasons like outdated or near falling apart), then a full replacement is probably the better option.

For more info, check out this infographic (

Why should I even switch to LED in the first place?

Very good question, and this not only applies to those retrofitting but for any facility that plans to make a lighting system update. LED technology has vast benefits in almost every area of the definition “quality” for commercial lighting purposes. Here are just a few of the major benefits that more often than not win over businesses to commit to the conversion over to LED technology:

As you can see these are all some pretty big benefits, and that’s only the start. These reasons are why many companies are making the conversion over to LED products from other outdated technologies such as metal halide, HPS, and even fluorescent. Why not convert to LED with a retrofit LED kit and realize all of these benefits and more? It just makes sense!

Is it difficult to retrofit an existing light fixture?

Well, that can depend. To someone who has no knowledge about lighting fixtures and electrical wiring, then yes this will seem like an extremely difficult task. On the other hand for someone who is a professional, this isn’t a difficult task at all.

The process, in theory, is simple because all it consists of (for the most part) is a replacement of all the existing lamps, ballasts, sockets, and brackets with new ones to fit your retrofit kits. If you have no experience doing this, and even if you do, it is always recommended to bring in a licensed electrician if you can to ensure it is done right and to safety standards.

Are LED retrofits that are compatible with existing ballasts a good idea?

You need to consider the age of the ballast that is currently installed. In most cases, it will be nearing the end of it’s life and thus it won’t be the most up-to-date ballast that you could have. This adds for an additional point of failure, which could cost you more down the line in maintenance fees to replace them when they die out.

You have to consider that since you are considering the switch over to LEDs through retrofitting, you most likely haven’t recently upgraded you lighting system or replaced much. This means that the ballasts currently installed are most likely, at best, as old as the lights in your fixtures currently. But more often or not, they are even older than that which can definitely mean they are nearing the end of their lifespan.

Taking this all into account, it’s impossible to tell you if using existing ballasts is a contact us. We will gladly answer any question you may have!

Stifling heat can be extremely uncomfortable. It makes you grumpy. You can’t sleep or really relax after a long day. During the height of the summer, it may seem like the heat will never break. Running the air conditioner is helpful, but sometimes, it just isn’t enough. You need the room to feel fresh and not muggy or humid. Not to mention, running the air conditioning all the time can get very costly. You can give your wallet and air conditioner a break while making your home a little more comfortable with the installation of a new ceiling fan. A Pasadena electrician can get you all hooked up in just a few hours. All you need to do is call The Electric Connection.

Ceiling fans make a beautiful addition to any room. They are elegant and useful. Most fans include lights as well that make them a dual purpose fixture. You can skip the hanging cords and have a remote control installed on the fan. With the touch of a button you can turn on the lights and set the speed of the fan. Ceiling fans should always be installed by an electrician. Pasadena homeowners will feel better and safer knowing the fan was properly wired and secured to the ceiling.

Imagine laying in bed with a cool, gentle breeze washing over you. The whir of the fan is also soothing for many. It helps lull them to sleep and keep them sleeping comfortably without getting that feeling of stifling air in the room. Your electrician in Pasadena can get you set up with a fan in each bedroom as well as any living spaces that tend to get a little warm. Combining the effects of a ceiling fan with your air conditioner will keep your home cool this summer. Give The Electric Connection a call today and schedule your installation before the summer heat rolls in.