The kids are grown and have homes of their own, so it’s time to make those empty rooms into that den, office, sewing room or home theater that you’ve been wishing for over the years. Or, perhaps you’d like to update your kitchen with new appliances or add some new, luxurious bathroom lighting fixtures. Maybe you’ve been thinking about a whirlpool bath. Why not? However, don’t forget to give your local electrician a call as you’re planning those changes. Chances are good that you’ll need a few electrical upgrades to make sure your wiring system is ready to handle the increased load. Consulting an electrician in Pasadena who is licensed and knowledgeable about home renovations can help you keep you avoid last minute complications as your project gets underway.

Electrical system upgrades are often an afterthought when homeowners start planning a remodeling project. Often, the plans are made and the new appliances, lighting and other electrical components chosen before the very basic issue of how to power them is discussed with an electrician. Pasadena homeowners, for the most part, just don’t stop and think about things like electrical load distribution and wiring system capacities when picking out that new, streamlined refrigerator or over-the-range microwave. However, forgetting to plan for those practical things can lead to unexpected costs when the need for electrical upgrades to make it all work becomes apparent. Including a licensed and bonded electrician in the initial planning of your home improvement project can ensure that necessary electrical work is budgeted in from the start, eliminating unpleasant surprises.

If you’re planning a remodeling project and have yet to choose an electrician in Pasadena homeowners won’t find an electrical contractor than H Electric. With more than twenty years of experience with remodeling projects in the Pasadena area, we offer knowledgeable advice and quality electrical services to ensure that your project turns out right. And, every job we do is backed by our famous lifetime guarantee.

Click here to read more

When you’re talking about electricity, safety is always one of the most important points to be made. Protecting yourself, your home, and your electrical appliances is a big part of having a functional home here in Tampa. And in our area, one of the biggest risks that can come up is a lighting storm. Lightning arresters are a great, effective way of taming these storms, and today we’d like to talk about what they are, how they work, and what they can do for you and your home!

Regardless of bends, twists, or turns, Example of a cut line on LED strip lights

2. You will now have two LED strip lights. Carefully peel back the end portion of the paper strip covering the strip’s adhesive backing, and then remove the 3M VHB adhesive from the solder pads on the bottom side of one of the strips. The strip with its adhesive peeled back will be the top strip when soldered.

5. Align the non-tinned strip segment (strip with adhesive removed) directly over the newly tinned pads, and apply heat. Hold the soldering iron in place until the solder remelts and begins to flow. To strengthen the bond and improve visual appeal, a small portion of solder can be added to the top pad.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split and solder a run of non-weatherproof two-conductor or connecting wires. Peel away the blue wire so that only the positive (red), negative (black), and control (green) wires are left.

*No wires should be peeled away if you’re joining single-color or standard RGB light strips.

3. Properly heat your soldering iron. For best results, clean and tin the tip of the iron immediately before soldering. To tin the iron, touch solder to both sides of the iron’s tip.

4. Next you will need to tin the solder pads on both ends of the split strip light. When soldering, always apply heat to the target area on the strip and not directly to the solder. Once sufficient heat has been applied to the area, start introducing solder.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split, solder, and reseal a

3. Follow steps two through five located at the top of this post for soldering a standard RGB strip light.

4. To reseal the strip light, apply

The LED strip lights are now connected, and power should flow through the entire length of the weatherproof strip.