When winter temperatures dip below freezing, families across the country fire up their furnaces, boilers, space heaters, woodstoves and other heating devices to beat the cold and keep their homes warm and snug. Unfortunately, the very appliances that ward off the winter chill can put you in danger of a house fire. January is the leading month for residential home fires, accounting for 21 percent of the total, according to the U.S. Fire Administration, and home heating is the second leading cause of all fires, after cooking.

Don't let your home become a statistic. Take these steps to reduce your risk of a house fire:

Clean your chimney: Creosote can build up from normal fireplace usage and clog the chimney from below; the chimney can also be clogged from above if debris falls in or if the chimney itself starts to deteriorate. Either way, it's a danger. Make sure your chimney is cleaned each year before using it.

Get your HVAC equipment serviced: You should have a technician pay a visit once a year to make sure your furnace and other equipment is in good working order. Your service professional can perform routine maintenance, repair any issues and instruct you on how to maintain your unit. Some maintenance, like replacing air filters monthly, you can do yourself in compliance with manufacturer instructions.

Careful with that space heater: Space heaters can be a convenient way to heat a small area, but they come with several caveats. Be very wary of liquid-fueled heaters -- older models shouldn't be used indoors at all, although newer models can be safe as long as you diligently follow all instructions regarding fueling and operation. Even electric heaters can cause problems, because they draw a lot of power which can overload the circuits in older homes. If you decide to use a space heater, make sure it is in no danger of tipping over, and never leave it running unattended. Space heaters account for one third of all heating fires, according to the National Fire Protection Association, so be careful.

Keep combustible material away from heat sources:  Leave a few feet of clearance between your stove, space heaters, vents, radiators and other heat sources combustibles like furniture, carpet or curtains.

Don't thaw pipes with a blowtorch: Frozen pipes are a serious problem, and thawing the ice is critical to avoiding a burst pipe and the expensive damage that can accompany it. You have a number of good options to heat the problem area -- a hair dryer, heat lamp, space heater, hot towel or specialized heat tape will do the trick. Avoid open flames, which create a fire hazard.

Test your smoke detectors: It just takes only a moment to ensure your smoke detectors work. If you do have a fire, they could save your life.

Mister Sparky electricians are always here to help. Call local Mister Sparky to have one of our professionals check to see you have an ample number of smoke detectors for the size of your home and ensure they are installed properly and in the correct location.

Your business operations are probably reliant upon electricity, like most operations in the modern world of today.  Do you have a backup plan in case the power goes out?  Most other businesses will simply shut their doors and deal with the consequences when the power is restored, but you can maintain business as usual thanks to the innovation of Dallas electrician to install an Indoor GeneratorTM for your business could be incredibly beneficial.  For certification or insurance reasons, you may have an even greater need to remain up and running.  Your valuable computer or medical equipment will thank you when you save them from the devastation of power surges and outages.

Consider these benefits of having backup power systems installed in your business:

The choice of a LED product is guided by watching specifications tables. Here is one table accompanied by the explanation of the features. The result should be a good lighting solution that is leaving a green ecological footprint. A good lighting solution is emitting enough light that the tasks in space can be conducted properly. First the lumens of the fixture (responsible for brightness in the room), the CRI (how good is the lighting concept representing colors), color temperature (how is the ambience in the room) and lumen per watt (efficiency of the system) are recommended to be watched. These criteria are responsible for a good lighting quality and energy efficient solution.

The other features are necessary information too. They serve further details about the fixture, the setup and maintenance of the lighting system.

(1) Type: The products name is a detail for purchasing the fixture

(2) Wattage: Defines the energy consumption of the fixture, which is important for the electrician and the ecological footprint of the system (referring to Lumens per Watts)

(3) CRI: Important character in areas where colors should be truly represented. For applications where people are involved, a CRI lower than 70 is not recommended. In shopping areas a CRI of 90 and higher is applicable.

(4) Lumens: responsible for the brightness in a room. The more lumens, the brighter the fixture is illuminating the space.

(5) Lumen per Watt: Efficiency of the lighting system. The higher the lm/W the better the ecological footprint of the product.

(6) Lumen Maintenance: how fast LEDs lose their brightness compared to new products (most manufacturers refer to the time when most of the LEDs reach 70% and less of the initial lumen output)

(7) Color Temperature: defines the mood or ambience in a room. Low quality lighting fixtures mostly have a very cool color temperature as these LEDs are more efficient than warm white LED products. A color temperature higher than 6000K is not recommended for a lot of areas.

(8) Beam Angle: the light is radiated into the indicated beam angle. LEDs are direct light sources with typical beam angles of 120° till 180°.

(9) Life Hours: defines the lifetime of a LED product. LEDs last 50,000h up to 100,000h.

(10) Replaces: a helpful information for replacing conventional light sources

(11) Working Voltage: high quality LED products have an integrated driver, Retrofit Solutions are delivered with the suitable ballast already.

(12) Frequency: detail about the admitted voltage frequency

(13) Power Factor: Efficiency of the ballast

(14) THD: Total harmonic distortion is describing the distortion caused by ballasts and other inductive loads of the input current on alternating current (AC) power systems

(15) Operating Temperature: The light source is operating under the mentioned conditions according to the manufacturer datasheet, other temperatures will cause the light source to fail or work not properly (e.g. light loss, different color temperature)

(16) IP Rating: the protection of the light source, ballast and wiring against liquids and solid objects

(17) Dimmable: dimming is the change in light source brightness, mostly undertaken by smart controls

(18) Dimensions: the fixture’s size, important for the definition of the mounting position and space

(19) Net Weight: the fixture’s weight, important for the mounting construction, e.g.ceiling strongness needs to be considered

(20) Housing: the housing is the surrounding of the light source and ballast, the higher the IP rating, the better the protection against liquids and solid objects which is important in car washes for example, the coating is important in swimming halls where the luminaires are exposed to chloride and humid conditions

(21) Mounting: possible mounting ways like pendant, surface or hock mount

(22) Warranty: how long after purchasing, the products are ensured working properly

Lighting technology around the world has come a long way from what it was a decade ago and many residential and commercial property owners are now opting for CBUS/Smart Lighting. This is essentially a microprocessor-based wiring system that controls the lighting on your property and the electrical appliances or devices you have there.

These controls can be used to switch on or off lighting circuits; they can also be used to switch off and on analogue-type controls such as the dimming of electronic fluorescent ballasts. A smart lighting system is able to control & automate almost any kind of electrical load. The system has an in-built microprocessor which ensures the operation of the system will be reliable.

Each device can be programmed individually through a PC-based software (point & click) or even via the “learn mode” that doesn’t need a PC at all. The information this system holds, lies within individual units and not one central point. While regular CBUS operation doesn’t really require a computer, the PC-based system provides added flexibility to those who require this control and is suitable for a broad range of applications such as:

Regardless of whether you are a commercial or residential property owner, you want to ensure your property is secure and sound. When you choose to get this system installed and integrate your security system into it, it provides you a higher level of security.

No matter whether you are out on a holiday or at work, your smart home system will ensure you get all the security information about your property. You can also set the lighting settings in such a way that the lights can get periodically turned on & off; this gives the impression that there’s someone at home.

Since the electrical and lighting systems on your property are cleverly operated by the CBUS system, it helps reduce power consumption; it does this by preventing your air-conditioning and lighting systems from staying on for much longer than required. These features make your property energy-efficient and smart at the same time.

For more information, simply speak with the experts at Allround Electrical and take their advice on various aspects of CBUS installations. The number to call is – 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263

The electrical field is one that has seen a number of remarkable discoveries over the decades. One very important lesson has been the aspect of grounding of electrical currents. It’s true that we need electricity for almost everything in our daily lives and can’t even imagine a world without it. However, it continues to be one of the most dangerous elements on earth. If you haven’t already properly grounded your home’s electrical systems, you are taking a significant risk by not doing so.

Every electrical circuit has an active wire which supplies power; there is also a neutral wire which is responsible for carrying the power back. There is a third wire (grounding wire) that can be attached to the power outlets & the electrical appliances and devices; this wire is connected securely to the ground in your breaker box.

This third wire is the additional path that the electrical current can pass through to be safely returned to the ground, in case there is a short circuit; this prevents any harm being caused to anyone. In the event that a short circuit occurs, the current flows through into this grounding wire and it’s when you notice a tripped circuit breaker or a blown fuse in the electrical main board on your property. If this wire hadn’t been grounded, it would have resulted in a fatal shock.

This is one of the most important reasons to ground electrical currents. It’s the best way to protect your family members from electrical surges when they are operating any electrical appliances in the house. In case a lightning strike causes an electrical surge on your property it can result in extremely high electrical voltages in your system. When the wiring has the proper grounding, all the excess electricity gets diverted into the earth, rather than burning everything that’s connected to your electrical system.

When your installation is grounded, it becomes very easy for the power to get directed exactly to where you need it; this allows the electrical currents to efficiently & safely travel across your home’s electrical system.

A properly grounded system makes it much easier for the power to be distributed in the right amount to the right places. This plays a significant role in ensuring that there is no overload in the circuits. The earth becomes the common reference point for all the different sources of voltage in an electrical system.

One of the primary reasons why grounding is extremely effective in keeping you safe is because the earth is an excellent conductor, and electricity always takes the path that has the least resistance. When you ground your electrical system, you are giving it a path that it can easily take, rather than into you; this can potentially save your life.

If your home’s electrical system isn’t properly grounded, you are just risking the appliances and equipment that are connected to your system, being burnt beyond repair. If the situation gets out of control that can also result in a fire risking your property and causing physical injury, sometimes even death.