A variety of ways exist to quickly and efficiently complete an electrical installation. One method involves using pre-made and pre-fabricated conduits, cables, panels, and devices. Pre-fab strategies cut down on repetitive labor costs and scrap material waste.

Furthermore, pre-fabricated components are assembled in quality-controlled factories by highly trained technicians. This ensures that every device and termination is in working order and properly connected. These technicians work faster and cost less per hour than a journeyman electrician, therefore saving the contractor time and money.

Another option to increase efficiency involves using pre-wired devices. They can be used for repetitive tasks like receptacles, switches, light fixtures, data ports, or fire alarms. They save time by eliminating the need to terminate each device individually. Instead, boxes are made to order and ready to install. The desired length of cable is attached and ready to run to the nearest junction point. Simply attach the box, route the cable, and connect to the supply wires. Most suppliers prepare a custom quote, further reducing time spent by the foreman planning and ordering parts individually.

Pre-wired panels are possibly the simplest way to save money, as they require no special tools. Wiring up a panel at the shop before heading to the job site allows you to function test it before installation. This ensures proper functionality. In addition, it keeps the interior of the panel away from weather and other possible sources of job-site damage. For larger or more complex panels, suppliers can be arranged and have the work performed by specialized technicians. Panels can even be ordered with pre-cut and pre-terminated lengths of cable or cord.

Most electricians have used pre-formed conduit, especially PVC which requires specialized tools to bend. However, entire runs of pipe can be custom ordered and pre-shaped. Especially useful in underground conduit networks or when complicated bends are required, these pre-made conduits drop in place and fit perfectly to the engineer’s prints. They also ensure that conduits are not damaged or kinked during the bending process and that no sharp edges or rough spots are left to damage wires or cables.

If the project demands it, entire buildings can be pre-made and pre-wired in a factory setting by trained technicians who specialize in quickly and efficiently preparing custom ordered buildings. Especially useful in industrial settings, these buildings come complete with all interior and exterior lights, switches, receptacles, and control wiring.

Often, motor control centers (MCCs) for large industrial installations are constructed this way. Therefore, on-site electricians are free to begin immediately running cables to motors and devices, with simple termination points inside a completed building. In addition to using fewer electrician hours, they also reduce required hours from other tradespeople such as welders or cladding installers.

Finally, pre-fab strategies are a great solution for reducing material waste, worker hours, and downtime while making deadlines a snap. Projects run smoother with fewer errors.

Any room, area, facility, or outdoors space you need to illuminate should be done so with quality lighting. The benefits of quality lights far surpass going cheap on your lighting fixtures just to save a few dollars. The importance of quality such as metal halide have a rather short lifespan compared to it’s competing technology, LED. LED gymnasium lights, and just LED lighting in general, prove to have a much longer lifespan. This lifespan can be 2-3 and sometimes even 4 times longer than other light sources such as metal halide.

This can allow for less frequent purchasing of new lights to replace old and burnt out ones, which will allow you to better realize a better ROI by investing in LED over metal halide or other similar technologies. This also indirectly reduces your maintenance costs by lowering the amount of time you have to pay someone to switch out burnt out bulbs. This can allow you to reduce your maintenance costs related to your lighting for gym areas by 2-3 times, which will just add on to the benefits that LED can bring to your facility.

While saving money through lighting efficiency, longer life spans, and less maintenance costs is great; it shouldn’t be achieved while decreasing the quality of light produced in your facility by your lighting system. Luckily, LED products allow for proper lighting in a wide range of applications, even your gymnasium. This allows you to create exceptionally safe areas that will keep visitors aware of all there surroundings.

Did you know that LED lights that are efficient called the DLC (DesignLights Consortium). This is an organization that qualifies commercial lighting products based on it’s quality and efficiency. There are both standard and premium qualifications, and premium typically yields higher rebates and thus higher ROI over standard qualified products. Although both are still good and are always recommended for any industrial lighting purchase because being qualified is better than not at all. Without being qualified, we recommend you stay far away from any light that isn’t DLC qualified for various reasons including it not being verified to be a “good” product.

If it isn’t clear by now, the answer is obvious. LED can, will, and should be bringing your gymnasium area all of the benefits that the technology offers.

From efficient, to quality and rebates; there is almost no reason why you should choose other gym lighting technologies over LED gym lights.

More importantly regarding safety of all visitors; LEDs will ensure your areas are properly illuminated with a wealthy amount of light, and won’t be under lit. Also since LEDs will never buzz nor flicker, you will never face that annoying issue that other technologies will do, not even near the end of it’s lifespan. And as you know, buzzing or flickering lights can cause annoyance and less focus, which is never good for a gymnasium environment.

Conclusion

There you have it, what quality LED lights can and will do for your gym. LEDs are also a great option for all of your other lighting needs, such as school rooms, hallways, write in to one of our professionals for some answers.

Each process of construction is directly or indirectly related to the other, so having a bit of knowledge about each one of these is imperative even if you specialize in only one.

From a contractor’s perspective, the construction of a house can be divided into two main phases: wet and dry. The wet phase refers to the initial phase when the house is unprotected from moisture caused by external forces such as rain, while the dry phase is the phase when most electrical work is carried out as the interior is safe from rain and snow.

On the other hand, from an electrician’s perspective, the two main phases of construction include phase one – the rough in, and phase two – the finish. This division is based on the stage of finishing that the walls are at. Here is a step-by-step guide into how the electrical work is carried out during the construction of a house:

Since there is a lot of machinery that operates on electricity and there is no electricity connection at the construction site, a temporary electric pole is installed during this stage.

Fixing things around the house is one of the joys of home ownership. It makes you feel accomplished and you can save a ton of money. It is a lot of work sometimes, but the excitement of tackling something that makes you feel a little more a part of your home is thrilling. Unfortunately, not every home improvement project or little fixes here and there are things you should attempt to take on if you don’t have the knowledge and training. Electrical work is one of those things. A Santa Monica electrician, like those at The Electric Connection, wants to warn you of some of the dangers you face when you take on a job that is above your skill level.

1-Property damage is a very real possibility when you attempt to fix something you are not really trained to repair. Messing around with electrical wiring can result in frying certain appliances or even melting the wires behind the walls. You would need to replace expensive appliances and possibly have to rewire that section of your home.

2-Fire is probably one of the most common problems associated with somebody unfamiliar with electrical work doing repairs they shouldn’t be. Melting wires or wires that are not connected properly can cause a spark that will set off a devastating fire. It is always best to hire a professional electrician. Santa Monica residents can feel safer knowing the wiring was taken care of by somebody who has been trained in the field.

3-Injury to the person doing the work is another very real possibility. Electrical shock can be deadly.

4-Nullifying home owner’s insurance policy may happen if an unlicensed person complete the work and a fire or other property damage occurs.

Don’t take the chance. Call The Electric Connection today and hire a licensed electrician to take care of your home’s electrical needs.