To answer the question “Should I worry about electrical repairs in a new home?” we need to specify what new means. Was the house built recently? Or is it “new” because it is new to you, regardless of its age? In either case, there is a simple rule to follow: if you think you need electrical repairs, you probably do—no matter how old the house is. Always worry about electrical repairs if there are signs that you need them.

When you move into any home built more than 10 years ago, you should hire an electrician to check the system for problems. Despite surface appearances, a home may have wiring troubles from DIY repair attempts from a previous owner; you want to make sure there are no serious problems that need immediate repair to prevent safety hazards.

With a home built pre-1970, you may encounter difficulties from an electrical system that cannot support modern demands. Check on the outlets and the circuit breaker panel. If the home has two-prong outlets and a fuse box instead of a circuit breaker panel, you should have new installations done to upgrade the system. Otherwise you may end up with some major repair worries in the near future. Older circuit breaker panels are often not up to the task of contemporary power needs. If you experience frequent blown fuses or tripped breakers, have a repair technician investigate right away.

With a recently-built house, you shouldn’t have many concerns about your power needs: the home should have sufficient wiring, updated GFCI outlets, and a new circuit breaker panel. However, you can’t simply go lax about small signs of difficulties or indications of improper electrical installation. Look for flickering lights that indicate small power surges. Although these rarely trip circuit breakers, they can cause damage to appliances over time. Call for a repair technician to see if your new home will benefit from a whole-house surge protector.

Check around your ceiling fixtures on occasion to see if they are growing hot. This indicates poor electrical insulation and sometimes occurs in new homes due to poor installation. If you detect poor electrical installation problems in one place in your home, they probably exist elsewhere; call for an electrician to examine your home’s electrical system thoroughly for faults.

Early in the month, American Airlines Flight 1420 crashed near Little Rock, AK. This crash, along with a few others that took place soon before and after, inspired research into the deleterious effects of sleep deprivation on pilot safety.

3) A Whole, Whole Lot of Drug Money

In June 1999, George Bush announced his candidacy for the office of President of the United States of America. So much was about to change in our culture during the next 8 years.

5) Lord Stanley’s Cup

via www.moviesonline.ca6

In June 1999, Stephen King got hit by a car and was flung 14 feet while walking on the shoulder of a road in Maine. What’s the name of that Stephen King book about the car? Oh yeah, Christine. Any connection? You never know. But I’m sure King was thankful Kathy Bates didn’t find him after the accident.

7) The Weird Looking Predecessor of the MacBook Is Born

That mildly annoying yet overall charming goofball Austin Powers (Mike Myers’s colorful character) graced the cover of Rolling Stone in June 1999, exuberantly celebrating the sequel to the original Austin Powers blockbuster smash hit. Smashing, baby!

9) Adam Sandler Tones It Down a Little

The universe’s hippest couple, who, of course played in a rock band together, hit the popular scene with their debut album in June 1999. Then, they became insanely famous. And then, thirteen thousand two-piece rock bands, featuring only guitar and drums, were born. I think now, 15 years later, we are finally beginning to see the decline in that questionable trend. Bass matters, people.

11) That Kid from Walking Dead Was Born

Venus and Serena Williams, two twin females from a socioeconomically disadvantaged place, won the Grand Slam female doubles event for the first time. They were the second sister team to win a Grand Slam event since 1890. This is the kind of thing that just makes you smile. These are some of the best ever to play the sport.

13) MORE TENNIS!

It’s incredible the way lighting can change outdoor spaces. As is the case with indoor spaces, spending comparatively little on lighting can produce dramatic results. A DIY outdoor lighting project might be just the thing to make you fall in love with your home all over again. But before you begin an outdoor lighting project, it’s important to think about your options. Here are 10 tips for 10 approaches to outdoor lighting.

1. Using Outdoor String Lights

Outdoor string lights are just great. But there are so many different kinds! Some have bare bulbs; some have lanterns. Some are LED; some incandescent. Some are white; some are colored. Make sure you research your options and choose the ones that are right for YOU!

2. Taking DIY Outdoor Lighting to the Next Level

Sure, you can install a standard low voltage lighting fixture and be justified when you say you Did It Yourself, but have you ever considered making your own DIY outdoor lighting fixtures? Mason jars seem to be the ingredient of choice when constructing your own outdoor lights. The internet is full of instructions for making DIY outdoor lighting fixtures, so do your homework and find the perfect project to make your outdoor area more luminous.

3 . Making it Modern

Let’s get weird! Isn’t that what modern outdoor lighting seems to say? I guess it depends on whom you ask. Modern outdoor lighting usually consists of interesting light fixtures with unusual, playful designs, and they can really make your outdoor vibe more interesting and thought-provoking.

4. Showing Off Textures

Sometimes you start with a particular light source in mind. These days, that light source is often LED. If you’re sure you want to use outdoor LED lights, you have a wide variety of outdoor LED light fixture types, from LED rope to LED tape to LED path lights, step lights, puck lights, recessed lights, and string lights. LED outdoor lights are highly efficient and look great. And some, like the one above, run on solar power! That means free!

8. Decking Out the Deck

If you are focused specifically on outdoor deck lighting, make sure you think about caution. Outdoor deck lighting should entail step lights if there are steps and should include lights around the perimeter of the deck. LED tape or rope, colored or white, are often great for running on the underside of deck railings.

9. Using Timers

It is not news that LED is becoming the new standard in saving money on your lighting bill. But with every new technology, the options are endless and plentiful, and sometimes clever marketing hides what really is important. If you understand the technology, its easy. If your new to the technology, you have to try and determine what is or isn’t important. Which makes the purchase decision even harder for those trying to navigate this maze of product availability and specifications. And to confuse the consumer even more, there is a lot of data being presented that is not created based on any agreed to standard. Read 10 different product brochures on what the marketers believe is the proper solution to replace 1000W Metal Halide and you will read everything from a low as 26,000 lumens to 70,000 lumens. Or what one manufacturer calls day white is total different than what another manufacturer thinks day white is. The best advice we can give the consumer is walk through the same process we do when we select our products to sell. We look for quality, performance, efficiency and great engineering. Let’s break that down to what that means.

Are the LED Lights UL or ETL Listed. This is the safety test. No one wants an unsafe product. The product must be able to perform without any chance of hazard. Are the lights DLC or Energy Star Rated? DLC (DesignLights Consortium) is a performance standard that makes sure the lights are efficient and perform at a high standard. It typically applies only to LED lights, but lately the standard has been broadened to include lighting controls. Energy Star is a consumer standard that applies to many products including small LED screw in bulbs. Up until recently, DLC did not have a provision for screw in bulbs, but has recently changed to allow some screw in LED bulbs.

Are the factories ISO Qualified? A lot aren’t, a lot say they are but aren’t. Some will say they abide by the ISO standards. What does that mean? Some will come up with their own marketing buzz words that sound great on paper and are very clever, but aren’t ISO certified.  To us, ISO certification gives us the peace of mind that the products we supply our customers are built and tested in an exacting and consistent manner with the least amount of risk of failure.

Every home has a fire detection system. This vital safety feature should be well understood. Smoke detectors, carbon monoxide detectors and security systems give homeowners peace-of-mind. Furthermore, when combined with a security system, these devices work together to form a complete home protection plan.

The second type of detector is an ionization detector. It uses a small amount of radioactive material to ionize the air in an internal chamber. This in turn, generates a voltage that can be measured. By-products of combustion will change the voltage that is generated and trigger the alarm. This type of detector is better at identifying active combustion with little to no smoke.

While both types of smoke detectors will safely alert a homeowner to a fire, combination alarms exist that employ both methods. Consequently, the responsiveness of the whole system increases. Hard-wired detectors are also available which can be wired to trigger all the alarms in a home if anyone detects a problem.

In any appliance that uses combustion, such as a furnace or stove top, a potential exists for hazardous carbon monoxide buildup. This by-product is tasteless, odorless, colorless, and highly toxic in large concentrations. Therefore, a carbon monoxide detector is highly recommended. It will monitor the levels of CO in the air and alert inhabitants before they become dangerous. They are available as stand-alone units that can be plugged in to standard wall outlets or as combination roof-mounted CO and smoke detectors.

Home security systems have been around for decades and make use of a combination of sensors including door, window, glass-break, and motion sensors. Historically, these devices were hard-wired and fed back to a central control panel. Many modern systems make use of wireless sensors that allow for easy retrofitting of existing homes. Door and window sensors utilize a small magnet and magnetic strip held open when the door or window closes. If the magnet is moved away, the magnetic strip springs closed and triggers the alarm.

Glass-break sensors are placed near windows and use a microphone to listen for the distinctive frequencies associated with glass breaking. Motion detectors take advantage of a variety of technologies, such as passive infrared, microwave, or ultrasonic. This technology detects something moving within its range. These can be part of exterior security lights or interior motion sensors. Security cameras can also play a role in home security. Install them indoors or outdoors.

When installed and used properly, a home security system can easily increase home safety while reducing the chances of burglary or fire. Most insurance companies offer discounts for home security systems. Because of this, the entire cost of the system may be offset or eliminated altogether. Be sure to ask your insurance company about discounts to homeowner’s insurance for improving or installing a new security system.