Do you think much about the electric outlets in your home? Odds are, probably not. But did you know that outdated outlets can lead to serious electrical problems, even including property loss and personal harm? The certified master electricians at Kolb Electric come to you today, bringing the things you need to know about the electric outlets in your home!

It’s important to understand that while you may not be seeing it, there are tons of things going on in your walls at all times. And beyond that, technology is always growing (at an alarming rate, in fact!), demanding more and more from your home in the way of electricity, compatibility and staying up to date. Older outlets can create a lot of potential harm, including:

An outlet upgrade project may seem like an inconvenience, but really it’s no trouble at all for a practiced electrician. The process is simple, takes little time, and prevents possible problems (it may even fix a few problems you didn’t know you had!). When it comes to upgrading, there are a few options you might consider, depending on your needs. Consider:

Thinking it might be time for an outlet upgrade? We think so too! Contact Kolb today for a professional solution for all of your electrical needs. Our certified electricians boast some of the greatest skill and expertise in the industry, and we would be proud to handle your outlet project!

What is a spotlight? What is a floodlight? Knowing the difference between the two is important for properly lighting any application. Before you can understand the difference, you must know what a beam pattern is. Beam angle or pattern is a measurement of the angles that are formed between a cone of light’s brightest point (the center) and the points on both sides of the center where the light’s intensity is 50 percent as bright.

PAR30 bulb that is available with a spot or flood beam pattern.

Fixtures, such as retrofit LED can lights may also look similar to one another while functioning as either spotlights or floodlights. Some light bars are even capable of emitting flood, spot, or combination beams. There are, however, certain fixtures that we imagine when we think of floodlights and spotlights.

Electrical motors are wonderful devices that are used in a myriad of ways, making things easier in our daily lives as well as a wide range of industrial applications. When these gadgets fail, work often grinds to a halt till they’re back up and running, and the reasons for electrical motor failure can range from the commonplace to the bizarre.

While the list of possible causes can go on forever, we’ll take a look at some of the most common ones here:

Exposure to high heat is a top culprit for all kinds of equipment failure, and ranks as the number one reason for motor malfunctions and deterioration. Optimal running temperatures extend motor life, which is why they should be your first priority.

In fact, most of the other possible reasons for electrical motor malfunctions also lead to the generation of extra heat. A rise of even a few degrees can cause trouble over time, and if motor windings are exposed to an extra 10° C of heat, the life of their insulation drops by half!

Breaker boxes or commonly called electrical panels are the modern day replacements for fuses boxes.  Breakers are the electrical devices that go into a panel or breaker box.  Breakers can easily be reset by flipping there switch versus having to unscrew and completely replace a fuse.  A circuit breaker can automatically open or trip upon an overload or a short circuit protecting the circuit and the appliances plugged into the circuit from possible damage.  For larger equipment such as those used in commercial or industrial applications switchgear is commonly used to protect and control equipment.

There is a lot of brands of breaker boxes or electrical panels on the market with some better than others.  Most breakers boxes on the market have been proven to be reliable and operate correctly and safely.  Brands such as Seimens, Square D, and Cutler-Hammer offer superior products and can provide the best protection possible with installed correctly.

Most brands that we currently know have safety and fire hazards have been pulled off the market.  However a lot of these brands that have been pulled off the market are in thousands and in some cases hundreds of thousands of homes across the nation.  One of the worst brands of electrical panels we see in the Des Moines market is Federal Pacific brand breaker boxes.  Federal Pacific panels were most commonly uses from 1960’s to the 1980’s.  These panels have circuit breakers that simply do not trip or open the circuit properly to provide the necessary protection.  Federal Pacific panels have been linked to countless fires and have even resulted in death.  If you have a Federal Pacific breaker box in your home we highly recommend it be replaced by a licensed electrician as soon as possible.  Another brand we advise immediate replacement on is Zinsco panels.  Certain types of Zinsco panels have been linked to several fires.  If you own a Zinsco panel we recommend it be replaced by an licensed electrician.

Though there are a variety of different electrical tasks that a handy homeowner can tackle on their own, taking on a job that is too complex or difficult for you can be deadly. If you do not know exactly what you are doing, or if you have to work with the electrical wiring in your home, we highly recommend that you have a professional electrician in Pasadena do the job. If you familiarize yourself with some of the most common signs and symptoms of wiring problems and other electrical problems, you will know when it is time to give us a call.

The following are some of the most common signs of more serious electrical problems:

You should never procrastinate in having your electrical system inspected by a professional electrician Pasadena. This is because even small problems can result in huge dangers. Keep your home and family safe by knowing, recognizing and responding to these signs of wiring issues.

Click here to visit our website.