No matter how hard you try, it is a huge task to try and remember to shut off lights whenever they are not in use. If you have a busy household with several family members, your task is next to impossible. It is frustrating to have to constantly remind kids and other adults to turn off the lights. It is a full time job that nobody has the time or patience for. Did you know that lighting accounts from anywhere between 20 and 40 percent of your total electrical bill? An electrician in Pasadena has a viable solution for you that does not require you to be on full time light duty. The team at The Electric Connection can provide you with more information or you can read on.

Lighting timers or wireless lighting systems are the answer to your lighting police needs. A wireless system can be quickly installed on any light that you find to be a problem getting shut off. Hallways, stairways and bathrooms are common areas of installation. If you choose to go with a system that is wired into the home’s electrical system, the installation is best completed by a qualified electrician. Pasadena homeowners will feel better knowing the system has been installed by a professional and the risk of bad wiring is avoided.

A wireless system is the best option because it leaves no holes in the walls or ceilings. It does cost a little more up front, but the savings on your electric bill will certainly make up for it. You can save up to 50 percent on your electric bill with the installation of light timers. You can certainly install the wireless system on your own and you can avoid hiring a Pasadena electrician. The choice is yours. If you would like to learn more about wireless lighting systems or the installation of light timers, give The Electric Connection a call today.

7.  Convert the extra closet into a sewing/hobby center.  Install a custom-cut countertop and a little task light… “Viola!” You are done.

8.  Or, maybe you are not done….Why not literally “Knock Her Socks Off” and build her a bigger closet?!

Whether you are building a new closet or updating an existing one, there are specific rules for lighting an enclosed closet space.  The National Fire Protection Association’s National Electrical Code (NEC) sets standards for safety:

Because closets contain flammable material with limited ventilation, strict building codes dictate that specified lighting fixtures must be installed 18” to 24” from walls depending upon which lamp source is being used.  Surface mounted and recessed fixtures must allow for 6”-12” of clearance from any storage space, such as shelving or clothing rods.

♦Of course,these standards are not a problem for Mariah Carey whose closet is as big as a bedroom!

One of the latest changes to the NEC code is the addition of LED (light-emitting diode) fixtures.  LED lighting may cost a bit more, but energy-savings, greater illumination and safety features will prove to be well worth the investment over time.  The quality and adaptability of newer LED lighting makes it an excellent choice for closets and dressing rooms.

9.  Don’t leave Mom in the dark!  Create a cozy corner with a new den floor lamp so she may relax and read, while you watch the ball game! Try a lamp with full-spectrum lighting to elevate her spirits.

10.  Reward yourself:  Clean out the garage and carve out a space for a workshop that is all your own!

People are investing more into floor covering, cabinetry and shelving to make the most of their garage space.    Fluorescent fixtures, track lighting and simple portable lamps are making their way into upgraded organized garage systems.

Electricity exists everywhere, from high voltage power lines to phones and computers. Understanding the basics of how it works remains essential to using it safely and efficiently.

When electricity travels from a positive lead to a negative lead in a circuit powered by a battery, it is considered direct current. This type of current powers electronics, LED lights, and cars. Alternating current is generated from rotation, usually by a generator. The direction of the current and the voltage flips as the generator completes a rotation. The faster the generator spins, the faster the flipping of current direction occurs. In North America, the typical frequency of AC power is 60hz or 60 alternations per second. The advantage of AC power is that the voltage can be stepped up easily by use of a transformer, which allows high voltage transmission. AC power is also useful for electric motors.

Specifically, power is a measure of energy usage over time. The standard unit of power is the watt and calculated as P (watts) = V (volts) x I (amps). Utility companies sell electricity in units of kW*h (kilowatt hours), which is simply one kilowatt of power delivered continuously over one hour.

As technology moves forward, our knowledge of electricity and our ability to make it safer for us to use has also advanced. One of the latest and greatest things we have at our fingertips is GFI outlets. You have probably seen these in some buildings and maybe even a few new homes. The National Electric Code has made these outlets a standard. Kitchens, bathrooms and other areas that are near water like pools and spas are all required to have GFI outlets in place instead of the standard outlets. If you are not sure if you have one of these, call The Electric Connection and we would be happy to explain. You can also read on and learn a little more about what they are.

Your electrician in Pasadena will explain exactly what GFI outlets are. These outlets look different than the standard ones you have seen for decades. There are 2 buttons in the center of the outlet. 1 red and 1 black. These are to test whether the outlet is working and the other is to reset it.

GFI or Ground Fault Circuit Interrupters can prevent against electrocution in the event a person is standing or touching water while using an electrical appliance. The GFI detects the very millisecond the electricity is no longer flowing along its proper second. As soon as it detects the break, it cuts power to the appliance, thus preventing a terrible accident. This is where the reset button comes into play. Simply reset the outlet after the situation has been made safe.

This is a fairly simple precaution you can take today to prevent a serious, life-threatening accident in the future. If you would like to learn more about replacing your existing outlets with GFIs, call an electrician. Pasadena residents can rely on The Electric Connection. We have a knowledgeable staff ready to help make your home a safer place. Give us a call today.