This post is the second in a series on energy-efficient lighting. We’re reviewing all kinds of spaces in homes and businesses to help you save energy.

Here are a few simple suggestions to save energy and hard-earned cash with your restaurant lights: 

Update Your Light Bulbs

Still using standard incandescent light bulbs? The fastest, simplest thing you can do to save energy is to update them. Whether they’re the ubiquitous A19 lamps, reflector lamps for your track lights, chandelier light bulbs in hanging fixtures, or decorative globe lights in the bathroom, you have tons of new energy-efficient options:

CCT indicates the hue and tone of white light emitted from a specific bulb or fixture. It’s measured in Kelvins (K), which is similar to degrees in Celsius. Different temperatures on the Kelvin scale represent different colors. For example, light at 2000K-3500K looks more orange/yellow and is called ultra warm or warm white, and as temperature increases in Kelvins, color changes to more of a “paper white” known as natural or neutral white (between 3500K and 5100K) and finally into a bluish-white known as cool white (5100K+).

As a light source’s color temperature increases, brightness often increases. While shopping for LED lights, pay close attention to the color temperatures that are available for any one bulb or fixture. Choosing a warm white bulb with a color temperature around 3000K might mean sacrificing some brightness. Whereas, if you choose the natural white version, it’s likely that it will have a higher output.

Any room can benefit from light strip, globe bulb,

In order to understand nanometers, you must first understand the electromagnetic spectrum and wavelengths. The electromagnetic spectrum is the entire range of invisible and visible light, and a wavelength is the distance between peaks of light waves. Wavelengths are measured in nanometers, which are simply units of length that indicate colors of light within the spectrum. Nanometers will tell you how red, green, yellow, purple, etc. a light source really is. These measurements start lower at ultraviolet and increase from green to blue, yellow, orange, and then red. The wavelength of a colored light can be found in the light’s specifications table.

MR16 beam angle in degrees (left to right): 36, 24, 15

Fixtures or bulbs that emit wide beams, such as BR LED bulbs for can lights are great for areas that require a lot of light, such as basements, kitchens, or living rooms. Narrow beam angles like those from can lights with MR LED bulbs are best for highlighting decor or small areas. Globe bulbs, such as G30 LED vanity bulbs, have 360-degree beam angles, which means that they throw light in all directions. Globe bulbs are the perfect choice for centralized light fixtures.

By: Sarah Trocolli

Father of electricity Nikola Tesla was known for being brilliant, quirky and driven in his pursuits to understand electricity, and after many experiments, Tesla eventually laid the ground work for the modern day Alternating Current electric supply system. As a tribute to Tesla and all the dads around the world, Mr. Electric® presents a few kid-friendly experiments exploring the basics of electricity for a fun Father’s Day activity. The kids can explore electrons, static electricity, voltaic batteries and other simple components of electricity – all under the safe supervision of their dads.

Level of difficulty: Easy

What you need: A dark room, fluorescent light bulb and a comb or woolen scarf.

What to do: Run the comb through your hair or through the wool scarf at least 20 times to let the electrons build on the comb. Then turn out the lights and hold the comb to the bottom of your florescent light bulb and watch the electrons charge the bulb. This is great for learning about electrons, and it can be a fun magic trick! For further explanation, click here.

Level of difficulty: Easy

What you need: Cornstarch, vegetable oil, mixing bowl, large spoon, balloon, and a measuring cup.

What to do: Blow up the balloon, tie it and then rub it on your hair. Mix a fourth cup of cornstarch and a fourth cup of vegetable oil into a mixing bowl, and then put the mixture on a spoon. Hold the spoon with the mixture on it near the balloon and watch the mixture gravitate towards the balloon. This experiment looks like a gooey monster stretching to touch the balloon, and it is a fun way to learn about static electricity! For further explanation, click here.  

Level of difficulty: Moderate

What you need: Distilled white vinegar, five pieces of copper wire, five galvanized nails, ice tray and one LED light

What to do: Wrap five nails with five pieces of copper wire and place them separately in the ice cube tray filled with vinegar. Create a circuit by placing the end of the copper wire not wrapped around the nail into the ice cube tray next to it until each section has one nail and one copper wire in it, and then place the LED light in the tray. You have just created a Voltaic battery! For further explanation, click here.

Level of difficulty: Challenging

What you need: Eight D-sized batteries, mason jar or other clear glass, electrical tape, pie pan, scissors, toilet paper tube, mechanical pencil refills and two sets of small alligator clips.

What to do: Connect the batteries positive to negative to create train of batteries. Place the toilet paper tube in the center of the pie pan and using electrical tape, attach the alligator clips and mechanical pencil refills to the tube. Place the mason jar/glass over the tube and connect the other end of the clips to the batteries. After the batteries have a few minutes to charge the circuit the mechanical refills will begin to glow and you will have a DIY light bulb. This is a great way to show that household items can be used in an innovative way. Exercise caution, as this experiment exerts heat and can cause the glass to become very warm. For further instruction, click here.

We hope these electrical experiments provide an enjoyable experience for dads and kids to spend quality time together while learning lots and having fun. Thank you to all the fathers who enlighten children and empower the thinkers of tomorrow. Happy Father’s Day from everyone at Mr. Electric!

As a local Dallas and Plano electrician. wants to make it a little easier for local residents and businesses to prepare for power outages that can come with higher stress on the power grid during extreme weather. With temperatures well into triple digits, and yesterday’s announcement by ERCOT of an Energy Emergency Level 1 Power Watch, power supplies are straining to keep up. It is very important to ensure that you are prepared for a situation where you may find yourself without electricity.

Here are the top ten items to keep in mind when preparing for a power outage in your area.