Restriction of Hazardous Substances (RoHS): RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Warranties

Super Bright LEDs, Inc. offers a minimum 2-year warranty to protect against manufacturer defects and malfunctions. Longer warranties are available depending on the product. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair, or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.

Read more

Lifetime Warranty

Super Bright LEDs, Inc. offers a Lifetime Warranty on a variety of products to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted.

Read more

CE: Meets European health, safety, and environmental standards

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

UL Recognized: Product component safety and environmental certification from Underwriters Laboratories (UL) LLC

Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Recognized label ensures that a product component, such as a power supply or LED light strip, has been tested and verified as safe to use in a UL-Listed product. UL-Listed product samples are tested by UL and meet their Standards for Safety requirements.

DLC: Listed as a quality, energy-efficient product by the DesignLights® Consortium (DLC®)

The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC’s Qualified Products List. For more information, click

DOT Approved: Approved by the Department of Transportation (DOT)

The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.

SAE International Class 1: Classified for use as emergency vehicle lighting by the Society of Automotive Engineers (SAE)

Vehicle warning lights are ranked by the Society of Automotive Engineers (SAE) according to class. A Class 1 LED light delivers the most amount of light (in comparison to class 2 and class 3 lights) and is ideal for emergency lighting on ambulances and fire trucks as well as police and rescue vehicles.

ETL Listed: An ETL-Listed product meets national safety standards

A product that bears an ETL-Listed label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.

FCC: Complies with Federal Communications Commission (FCC) rules. Won’t cause harmful interference.

Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won’t cause interference with other electronic devices. According to FCC’s website, “The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories.” Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC’s guidelines and limits and do not cause harmful interference.

SAA: Standards Australia (SA) compliance

Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.

IP65

The weatherproof product allows zero entry of dust. It is protected against jets of water and may allow limited liquid entry.

IP66

The weatherproof product allows zero entry of dust. It is protected against strong jets of water and may allow limited liquid entry.

IP67

The waterproof product allows zero entry of dust. It is protected against the effects of immersion between 15 centimeters and 1 meter.

IP68

The waterproof product allows zero entry of dust. It is protected against long periods of immersion under pressure.

IP69K

The waterproof product allows zero entry of dust. It is protected against high-temperature, high-pressure water and steam.

UL 844: Meets requirements from Underwriters Laboratories (UL) LLC for use in hazardous (classified) locations

UL 844 requirements cover fixed and portable luminaires for installation and use in the following hazardous (classified) locations in accordance with the National Electrical Code, NFPA 70:

These requirements cover luminaires for use only under the following atmospheric conditions:

Heating a garage is no longer a challenge with our new electric heat units.  Wake up to a warm car and not a block of ice!  Have a 2 story home with a cold bedroom above the garage?  Heating the garage with an electric heater can make that room above comfortable again in the winter months.  The stylish and effective garage heater puts out a warm 4,000 watts of efficient electric heat.  We can mount the electric heater to the ceiling and not take up your precious floor space.  A ceiling mounted unit also reduces the chance of a combustible object coming in contact with the heater.  Our electric heaters mount up and out of everyone’s way, you wont if know they are there other than the warm electric heat they produce!

We install a variety of electric heaters in garages, shops, sheds or any place you need heat.  The electric heaters come in 3 striking colors red, yellow, and stainless steel to match your spaces décor.  The unit comes equipped with a quiet helicoidal fan and is a thermal protected unit with built in automatic reset with a permanently lubricated motor.

These garage heaters can make you sweat.  But no need to waste that heat, we can install a wall mounted thermostat to control your level of comfort.  With 4000 watts of power at 240 volts you will need a dedicated circuit to provide safe reliable power.  But don’t be discouraged, our highly trained electricians can get the proper power needed to get you warm today.  Our licensed electricians posses years of experience. They know how to get the job done right the first time!

If you have ever dreamed about running your home on solar power, but have always chalked it up to one of those fantasies you will never see come true, think again. Solar power is becoming more and more popular with today’s technology and the world’s desire to save our natural resources. Relying on the sun to power your home isn’t something that is reserved for those who live in the backwoods areas. Every person can equip their home with solar panels and begin to take advantage of the free energy the sun provides. An electrician in Beverly Hills can help your dream of using clean, renewable energy a reality. You will find a team of electricians at The Electric Connection who are familiar with the installation of solar power panels.

Nowadays, solar panels are much more compact as well as aesthetically appealing. They will typically comply with any covenants a neighborhood may impose. The panels are mounted directly to the roof and do not take up any space in your landscaping. There are several different types and brands of solar panels you can talk about with your electrician. Beverly Hills homeowners will want to choose what is right for their needs.

In many cases, homeowners are simply looking for a way to offset their electric bill, but are not trying to rely completely on solar power to power the home. This is an excellent way to save money every month. Your solar installer will know which panels will work best for your home’s locations and your needs. Not all panels are created equal. If you lived in a heavily shaded area, you will need a panel that has a higher conversion rate. All of this is information you can get from the folks at The Electric Connection when you call today.

Oil and natural gas resources are highly in-demand for the fuel and energy sectors, and this demand will continue to grow. Companies working in these sectors are often hard-pressed to put effective electrical systems in place that can handle the energy requirements without compromising on safety and reliability.

The good news is that modern electrical solutions are designed to handle the pressures and demands of processes in every aspect of the oil and gas industry. Today’s electrical infrastructure combines safe and reliable power supply with state-of-the-art information management systems customized to suit various requirements.

Let’s take a look at some of the electrical equipment available for oil and gas industry applications:

These can easily be considered some of the most essential products for the oil and gas sector, since they offer improved safety and security for employees as well as production units. Efficient warning systems can reduce the risk of casualties and save lives in case of untoward incidents.

We are giving away 1 ceiling fan to a lucky winner!  Best of all, it comes with installation!  To be eligible to win you must:  Like our page and share this post.  That is it!  Winner will be drawn October 30th, 2016.  *

Fall is fast approaching.  For many its there favorite time of year.  Mild days and cool nights make it a great opportunity to open up some windows and let some fresh air in!  Ceiling fans are a great solution to move some air around.  Many modern day home layouts don’t allow for much cross ventilation depending on the window alignment.  With a ceiling fan installed it easy to get that air moving again.  A ceiling fan can even reduce your energy consumption by up to 30%!  Who wouldn’t want to save 30% on there energy cost?

A chemical free deterrent to bugs and mosquitoes can be as simple as turning on your ceiling fan.  It is a known fact that the wind reduces the amount of air born insects around you.   Also the wind dilutes and blows away the carbon dioxide you exhale.  Similar to why airplanes have trouble landing in high wind so do bugs?  They often seek protection during high winds or try to avoid them all together.

A ceiling fan should only be properly installed by a trained electrician.  We often find ceiling fans installed on plastic boxes or boxes with the wrong size screws.  Can you imagine a ceiling fan rotating at high speeds and weighting 30 to 50 pounds falling from your ceiling?  We have seen ceiling fans that have even fell on a child’s bed due to improper installation.  Thank goodness no one was hurt in that case!

A under sized ceiling fan wont be as effect as a properly sized ceiling fan.  Also, ceiling fans should be installed at a minimum of 7′ off the floor, 20-30 inches from walls and 10-18 inches from ceiling to increase there effectiveness.  Also consider features of the ceiling fan such as the light quality, remote option, and number of speeds.  As the old saying goes ” you get what you pay for” this is also true when it comes to ceiling fans.  Cheap fans are usually more wobbly, nosier, and don’t last as long.  Spend what you can afford but try not to buy the cheapest fan possible.  Search for name brands such as Casablanca, Emerson, Minka and other high quality fans.  Unless your truly a handy individual and know the electrical code when it comes to proper ceiling fan installation you should have a professional install your ceiling fan.  Contact us today to have one of our trained, trusted, and background checked electricians install your fan and put the cool back in that room!

*To be eligible for ceiling fan giveaway you must live within 20 miles of the 50325 zip code.  For installation you must currently have a ceiling fan or light fixture installed and location installation of choice.  Box supporting existing light fixture or ceiling fan must be rated for a ceiling fan.

Categories: Uncategorized« Hot Tub and Pool Wiring Don’t Risk Your Safety!  |  ELECTRICIANS – STOP LOOKING FOR A JOB! 3 Reasons to… »