Electrical fires can be extremely destructive and uncontainable, once they break out. An electrical fault and severe sparking in the electrical installations in one part of your property can easily spread to the other areas very quickly. This means the destruction caused can be extremely high and the fire can pose a threat to the people living or working on your property as well.

When you get the electrical system on your property installed by credible professionals, you can rest assured that there will be no problems and that they will be quite safe. However, if you live on an older property that also has old wiring, it can deteriorate or get damaged over time, and can prove to be extremely dangerous. This is why you should make it a point to conduct routine checks on all the electrical installations in your home.

Most electrical companies also design preventive electrical maintenance contracts based on your specific needs; they will visit your property at pre-decided intervals and conduct thorough checks on all the electrical fittings and installations. This helps identify potential & existing problems beforehand and these can be fixed before they pose a major hazard.

Aside from this, it’s also important that you be wary and conduct some basic checks on all the electrical installations. Here are some signs you should look out for:

If you find that a particular circuit breaker trips once in a while, it may just be an indication that you have plugged in too many electrical appliances and devices all at once into that particular circuit. However, if you find yourself resetting the circuit breaker too often, it’s crucial that you don’t ignore it.

The circuit breaker is built specifically to alert you when something is wrong with the system; this is why you should call in a skilled electrician and get it checked without delay. The constant tripping could be an indication of a much bigger problem.

If you hear buzzing sounds or notice sparking in an electrical outlet or if you detect a burning odour emanating from the outlets, that’s a very strong warning that something’s wrong with it, and that it needs to be replaced as soon as possible. Not only will the electrician check the outlet, but will also check and update the wiring connected to it.

If you experience an electrical shock while operating any appliance or device in your home, it’s an indication that there is electrical current leaking at some point. This could be caused by faulty wiring or even a grounding fault. The electrician will use special testing devices to see where the problem lies and will fix it quickly and efficiently.

Sometimes a light bulb might flicker because it hasn’t been fitted correctly in its socket. However, there are times when this problem is caused due to a loose circuit or loose wiring. It’s the same with other electrical outlets that don’t function as they should.

The electrical inspection checklist is perhaps one of the most important documents you’ll want to take notice of if you are building a home or doing significant renovations. In short, it is a rundown of all of the electrical systems in place. It ensures your home’s electrical system meets the requirements set by local codes and overall electrical safety standards. While each contractor and local area may have its own version of this electrical system checklist, it’s important for you to know what to expect.

Generally, this inspection tool is a way for the contractor, local building departments, and licensing agencies to ensure the electrical work completed on a building is safe and done according to industry-wide protocols for safety. It helps home inspectors to ensure that electrical installation meets specific guidelines set forth under local building codes. It also works as a way for contractors and project managers (as well as homeowners) to know what’s been done, what’s going to be done, and what needs attention.

Here’s a look at some of the elements of this electrical inspection checklist you’ll see. You can use this as a basic guide before asking your electrician or building contractor for a copy of your own:

We’re barely a week into fall and the temperatures are already dropping and the stormy season is upon us. Here in Virginia, we’re bound to get our fair share of severe thunderstorms, which always carry the potential of a power outage. Because September is National Preparedness Month, we thought we would help you prepare ahead of time for a power outage, should one happen in your neighborhood.

Southern California residents are fortunate in the fact the winters are fairly mild, but you will need to run the heater from time to time. You can save a lot of money on heating costs by following these tips presented by your Los Angeles electrician. The team at The Electric Connection can help you get your home ready for what very well may be a very long, cold winter.

Keeping your house warm can be difficult if it isn’t properly insulated. Do your best to make sure your attic space is insulated. Another helpful tool to keeping in the air you pay to heat inside where you want it is by adding weather stripping around doors and windows. This will take care of those cold drafts that seep in around the spaces. The stripping includes sticky tape that is easily peeled off and stuck to the door and window jams. It is fairly inexpensive, but can save you a great deal of money on heating AND cooling costs. It won’t be visible and can also reduce the sound that comes through those small cracks.

Another option that is very helpful during the cooler months as well as the summer months is a ceiling fan installed by an electrician. Los Angeles residents can help reduce heating costs with the installation of a ceiling fan. The fan blades will push the hot air that rises up to the ceiling back down into the living space. The hot air in the room will keep the thermostat from kicking the furnace on repeatedly. This is where the cost savings is. Your ceiling fan can also act as a light fixture in the room. Remote controls are an option if you have high ceilings. If you are ready to take the next step in fighting high heating bills, give The Electric Connection a call today.

One of the most affordable and effective components of any home security system is motion detecting outdoor lighting. Installed by a professional electrician, these lights can give you years of reliable service and peace of mind.

But like any part of your household electrical system, problems can arise from time to time. If your outdoor security lights are staying on all the time, not coming on at all or otherwise performing poorly, you can try these simple DIY fixes before calling an electrician.

Most motion detecting light fixtures allow the motion detector to be aimed at a specific area. If your lights are coming on too often, it could be that the sensor is aimed at a nearby street or an area where wildlife roam around at night. If the lights aren't coming on at all, the sensor might be aimed directly at the ground or into the side of the house. Experiment with different sensor positions after dark and walk around in the areas you want to secure to fine-tune your aim.

Motion detectors also typically come equipped with sensitivity settings. Too sensitive, and something as small as a fly could set it off. Not sensitive enough, and a prowler could come within a few feet of the fixture before it lights up. Locate this setting and fine-tune it to your liking.

Another common setting for motion detector lights is a light duration time. This can be as long as 30 minutes, and if your lights are unwittingly set this way, it could give the impression that they stay on all night. A good duration for most security light applications is one to two minutes.

A dirty sensor can’t detect movement properly. If dirt and dust have accumulated on your motion detector, use a wet rag to wipe it clean, then re-test your lights.

Security lights can get off-kilter if there are interruptions in the electrical supply, such as power outages, power surges and accidentally flipping light switches or breakers. Sometimes this can result in lights that stay on or off all the time. To reset most motion detecting lights, shut off the power supply at the switch for at least 30 seconds, making sure there’s no motion in front of the sensor during this time. Then turn the light back on and test it to ensure proper function. If there was motion in front of the sensor while the power was off, this may need to be repeated.

Not all motion detector problems can be fixed this easily. If you have persistent problems, storm damage or faulty installation, it’s important to call in your local licensed electricians for a professional evaluation and repair.