When you think of electrical work, what’s the first thing that comes to mind? We’d like to think that Kolb Electric is the first thing that pops up. But hey, we’re realists. You think of stress, you think of frustration, and mostly think of the money involved. With this in mind, it can be pretty easy to want to contact that “friend of a friend” that dabbles in electric work, right?

Well, the experts at Kolb would like to have a little talk about that. And not just the DIY buddy you may have; we’d like to discuss disreputable and unofficial Baltimore electrician “companies” as well. Trust our word we we say these kinds of solutions can do more harm than good!

Need an electrician in Baltimore? Save the stress and contact Kolb Electric!

We’ve discussed this at length in the past, so we’ll stick to the cliff notes here. Disreputable electricians in Baltimore are any that lack current, in-state licensing. Those that carry no official, genuine documents, and those that operate from unmarked vehicles. These types of companies also often ask for cash up front, and are just as likely to disappear as to do the project they were hired for.

When you’re looking to hire electricians in Baltimore, keep in mind that you’re putting a huge amount of your personal assets and heath on the line. By dealing with a company that isn’t recognized, you risk:

Beyond dodging all of those issues we listed above, working with professional, certified electricians will net you:

If you’re looking to hire electricians in Baltimore that can provide you with peerless, effective electrical services, look no further. Contact the experts at Kolb today to set your appointment!

Even if you like shopping around and looking for the best deals, it’s always preferable to have all electrical services for your home or building handled by one company. It makes your life much easier. You wouldn’t need to worry about tracking down different providers every time a new issue comes up with your electrical system. However, this convenience comes along with even more importance placed on the company you choose. If your electrical company isn’t reliable, you could be in for a world of headaches with them attempting to handle all your needs.

A powerful advantage of getting your electrical services from one company is the ability to save time. If an electrician is called out to check your outlets one day, he might inspect your electrical panel and the other components of your system as well. If another issue arises, this time something related to the panel, he would already be familiar with your system upon his arrival. Instead of needing to figure out the various aspects of your electrical setup, he could get right to work.

Not all electrical companies are created equal, and some might be a better fit for you than others. When you’re unsure about the reliability of a provider, you might be reluctant to put too much faith in them. On the other hand, the right company can take all the stress out of maintaining and fixing your electrical system, regardless of what might be wrong.

RGB LED strip lights are a great way to add a pop of color to your above-ground pool. These low-voltage LED lights can be applied to the inside rim of your pool or around your pool deck. With RGB LED strip lights, you can choose from a ton of dynamic color-changing and single-color modes with adjustable brightness and speed control. They’re great for parties or late-night swims and can be easily installed. We’ve included installation instructions for our waterproof LED strip lights. Some cities require above-ground pool lighting to meet National Electrical Code (NEC) Article 680 standards, which would limit possible pool lighting installation locations. Before you purchase LED pool lights, check your city’s code requirements. We also recommend that you have a certified electrician install your lights.

1) Before ordering your LED strip lights, measure the diameter of your pool and multiply by 3.14 to find its circumference; this number indicates the total length of strip that you will need. The 21-foot pool used for these installation instructions has a circumference of 65.94 feet and requires 4 runs of 16-foot LED strips.

You will also need to measure the distance between where your power supply will be and both sides of your pool where the amplifiers will be installed (see the setup and wiring illustration below). These distances will tell you how much 18-gauge wire you’ll need for connecting the amplifiers to power. Make sure to account for the distance of any dips or turns that the wires may take along their paths.

Lastly, measure the approximate distance that will be between your controller and where your strip lights begin. This distance will tell you how much 22-gauge wire you’ll need for connecting the controller to your strips. You will also need two small sections of this wire for connecting your first and second strip lights to the amplifiers.

2) Before you’re ready to install your LED strip lights, be sure to drain your pool. Begin by creating or locating a dry area away from your pool for the power supply. The power supply should be contained in a weatherproof box. Power supplies should be installed between a ground fault circuit interrupter (GFCI) protected circuit and the pool’s junction box. It’s crucial to use a GFCI protected circuit as it shuts off if current flows where it’s not supposed to.

Wire the included plug to the power supply, but do not connect to power until the installation is complete.

3) Connect your RGB LED controller to the power supply. Cut the barrel off of the controller wiring. Strip back the remaining wires, and connect its wires to the power supply.

4) Cut the LC2 connector off of the remaining end of the controller, and strip back the wires. Run 22-gauge four-conductor wire to connect the controller to your low-voltage pool lights; use dolphin connectors to join like-colored wires. Connect your first two LED strip lights to the controller by joining each set of like-colored wire with a dolphin connector. You should be connecting four wires of each color (red, blue, green, and black) together. For added protection, cover all wire connections in this installation with electrical tape.

5) You will apply strip 1 clockwise around your pool rim and strip 2 counterclockwise. If you have a flat surface, use mounting clips to secure the strips in place as you go. If you want to mount the strips under your pool rim, drill small holes in the trusses approximately every 2 feet. Use cable ties to anchor the strip to the truss. You can also use speed nuts or cotter pins for strip anchoring to avoid drilling holes.

Solder a small section of 22-gauge four-conductor wire onto the strip’s end terminals. To reseal the LED pool light strip, slide wires through the holes of a 10-mm end cap, fill the cap with silicone, and slide it into place on the end of the strip. Be sure to cover all of the exposed conductive traces to ensure water resistance. Allow a minimum of two to three hours for the sealant to cure.

7) Once the new end wires are attached to the strip, you will mount the amplifier. Use the double-sided 3M foam pad to mount the amplifier in the middle of strip 1 and strip 3. For best results and added security, apply 3M adhesion promoter to the amplifier and its installation location on the pool wall.

8) Using a dolphin connector, join each like-colored wire on strip 1 to the same color on one end of the amplifier. Do the same when connecting strip 3 to the other side of the amplifier. You should be connecting three wires in each color (red, blue, and green) together on each side of the amplifier. The black strip wire will be joined with white amplifier wire. Note that the separate group of just black and red wires are meant to be connected to the power supply. Follow the same instructions for connecting strips 2 and 4 to the amplifier on the other side of the pool.

9) Use 18-gauge wire and dolphin connectors to connect the amplifiers to your power supply.

10) Plug the power supply’s attached cord into an outlet, and enjoy your LED pool lighting system! Refill your pool with water, but make sure to leave space between the water line and the lights.

For more LED pool lighting options, see our entire selection of waterproof color-changing LED strip lights.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.