Out with the old and in with the new should never end with your used electronics in a landfill. A growing concern across the globe, electronic waste, or e-waste, is rapidly creating a crisis. Only 11-14 percent of electronic waste in the United States ready for disposal is actually recycled or reused, while the remainder is creating environmental and health issues worldwide.

Don’t have time to deal with your e-waste? Don’t dump it. Contact Mr. Electric today. Proper disposal and recycling is essential to preserving our environment and the health of future generations. With the help of HirePatriots and Mr. Electric, we can quickly and responsibly handle all of your electronic waste needs.

Aluminum LED profile housings allow you to create customized light fixtures with LED strip lights. Our Klus brand LED channels are available in many different styles, including recessed-, or flexible, O-shaped, and more. Available in 1- and 2-meter lengths, the channels can be easily cut for any application from under-cabinet lighting and bookshelf lighting to showcase lighting and transition strip lighting. They’re available with a variety of lens options, such as clear, frosted, and etched that complete the profiles. We’ve put together a step-by-step guide for using these channels to create your own light fixtures. Please note that your specific channel might vary from the one used in this tutorial.

Materials needed:

1. With a pair of clippers, carefully clip through the clear plastic heat shrink as shown in figures A-C. You will want to take your time and be careful not to cut the strip’s wires while removing it.

2. Lay the LED strip into the channel, and position it along the bottom so that the ends of the strip and the channel are lined up (fig. A). Now, remove the paper from the strip’s adhesive backing (fig. B), and adhere the strip to the LED channel—starting at the lined end and working your way to the other end of the strip. Be sure to leave roughly 1/4-inch free at the end of the channel so that you can install the end cap as shown in figure C.

3. If one of your end caps doesn’t come with a pre-drilled hole, you will need to drill your own to allow the wires of the LED strip light to come through. In this case, we used a Dremel tool, but other options are viable as well. Regardless of the tool you choose, it is helpful to mark the end cap where you would like the wires to come through. Start the hole small, and increase the size as necessary.

4. Place the end cap on the wired side of the strip by threading the wires through the end cap as shown in figure A. Insert the end cap into the end of the light bar, and push firmly until it is fully in place (fig. B).

5. On the open end of the bar, slightly peel up the end of the LED strip (fig. A); this is necessary to install the end cap. Now measure your channel lens, and trim off the excess with clippers (fig. B). Be careful when trimming to avoid cracking the plastic. Excess material can be lightly sanded off. Once the lens has been cut to the proper length, slide it into the channel, and install the end cap as shown in figures C and D.

6. That’s it! Your customized LED light fixture is complete and ready for installation, which we will cover in the next step.

7. Mounting this LED profile is as easy as applying double-sided tape to the back of it and sticking it to your intended surface. Be sure to cut the tape to fit the back of the LED profile and to leave the tape backing on the side not attached to the channel until you are ready to mount it.

For most LED profiles, mounting clips are available for a more permanent installation.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Technology giant Google made its start as a search engine, subsequently branching into email, cloud storage, advertising and so much more. Now the company from Mountain View is surging forward with a new application, promising to tell consumers if their roofs are suitable for installing solar panels. The program, called Project Sunroof, works in conjunction with Google Maps to analyze your roof's size, orientation and shade levels to tell you at a glance how much solar energy you could get from it. Read on to learn more about how this convenient software works and how it can help you.

A Mix Between a Solar Electrician and a Search Engine

The program is simple to use – all you have to do is enter your address, and Google does the rest. According to the company, the program analyzes all of the following to determine how much sunlight you can soak up:

The program also provides information about what tax credits are available in your area as well as the local rules regarding selling solar energy back to the utility company when your panels are producing more than you need. It then spits out a recommended installation size, which you can modify based on how much electricity you actually consume according to your average electricity bill.

Pay Nothing and Start Saving Today

Google's entry into the solar market comes at a time when the options for solar are expanding, including the ability to lease panels from solar companies and enjoy savings on your utility bills while paying nothing for the installation and setup. A good setup can last for 30 years or more, with little to no maintenance from an electrician once the installation is completed.

Of course, solar isn't for everybody, since many roofs might be too shaded or otherwise not suitable, and some states still don't have good solar policies. Therefore, Project Sunroof can be a good place to get started to see if your house is a prospect before you even call a solar electrician. Currently, the program is working on a trial basis in Boston, San Francisco and Fresno, with more cities sure to be on the way.

Don't Forget About Human Experts Just Yet

Of course, even a technology company as powerful and ubiquitous as Google can't fully substitute for an experienced solar technician when it comes to analyzing how you can benefit from panels. If a Google query indicates that your home is a good candidate, have a qualified electrician or solar expert make the final determination and help you decide if solar panels are right for you.

Lighting designers look to nature for organic, eco-friendly and sustainable artistic inspiration. Whether they are planning for interior and exterior lighting installation, a healthy blend of natural elements is always in style.

Bring nature indoors and out and get inspired by shopping nautical inspired lighting designs at Capitol Lighting.   The sea is a wonderful, natural inspiration and Capitol Lighting has a huge selection of nautical lighting from which to choose –over 300 designs and unique accent pieces!

When it comes to nautical lighting, Capitol Lighting offers everything from outdoor wall lighting to kitchen island lights. You don’t have to live by the sea to appreciate the essence of nautical lighting design.  Trend-setting finish options and appealing blue hues incorporated into the latest nautical lighting designs.  These lamps and light fixtures are timeless and classic, and they add a casual charm to both the traditional and modern home.

Whether you are shopping for kitchen island lights, outdoor wall lighting or outdoor pier lights, find hundreds of nautical inspired lighting designs at Capitol Lighting online or in one of our retail showrooms nationwide.