A significant number of homes in Baltimore and Bethesda, MD, Alexandria, VA, and Washington, DC built between the mid-1960s and the first half of the 1970s have hazardous aluminum wiring rather than copper. During that time, aluminum wiring was considered safe to use and viewed as a cost-saving measure. The U.S. Consumer Product Safety Commission (CPSC) now believes aluminum wiring poses a safety hazard in homes that still have this type of wiring.

The biggest danger associated with aluminum wiring is that unanticipated fire hazards arise from the oxidation and deterioration caused at the points where aluminum wiring is connected at outlets, light fixtures, and splices. While this can cause overheating and arching that won’t trip a circuit breaker, it can cause a fire. Aluminum wiring was used in an estimated 2 million homes between 1965 and 1973—and many of these homes are located in the MD, VA, and DC area.

If you’re concerned about dangerous aluminum wiring, pay attention to the following warning signs:

All of these signs indicate a potential fire hazard for standard aluminum wiring.

Aluminum wiring should be thoroughly evaluated by a qualified electrician who is experienced in inspecting and correcting wiring problems. The CPSC recommends a few methods for correction. The first is to rewire the home with copper wire, an expensive option that really only makes sense if the homeowner is already in the process of completely remodeling or doing deep renovations. The second option is to use the Copalum crimp method to correct the problem. This involves attaching a piece of copper wire to the existing aluminum wire with a specially designed metal sleeve and powered crimping tool. It is a permanent repair option that will eliminate the dangers posed by aluminum wiring. A third option is to use a UL listed copper to aluminum connector to attach a copper wire to the existing aluminum wire.

Only an experienced electrician can accurately determine the level of danger a home with aluminum wiring faces, and then fix the problem in an efficient, timely manner.

If your home has aluminum wiring, we recommend that you call Kolb Electric or contact us online. We will send one of our expert electricians out to evaluate the aluminum wiring in your home to determine the best option to make your home as safe as possible. We’ve been serving Baltimore and Bethesda, MD as well as Alexandria, VA and Washington, DC since 1925. You can count on our experienced electricians to get the job done right the first time.

We all know or at least heard that converting from Metal Halide (High Intensity Discharge) to LED will save you money.

But how much? Are there any other reasons or difference you should know about?

In this article, we break down all the factors that you should be aware of before making a decision to convert from Metal Halide to LED. Here are the 9 reasons we think LED wins over Metal Halide.

Let’s take a look at the information on a typical 400 watt metal halide bulb. While specifications may vary, a visit to a popular online website that sells Metal Halide bulbs shows that a brand new bulb has the following specifications:

We have just as many customers wanting to convert to LED because of maintenance savings as they do for energy savings. Think about what we discussed, over the life of the LED retrofit kit, a customer would have to do 5-6 Metal Halide replacements. The higher the installation height, the higher the cost of replacement. And if you have a facility loaded with lights, this becomes a significant budget amount every year that you must take into consideration. Now, we know that reduced maintenance time on lights does not translate into dollars saved because it is highly unlikely that people will lose their jobs over the fact there is much less work to do. However, these people will have time to now work on things that matter, like fixing the machines that make the company money instead on replacing lights that cost the company money.

When you take a measurement of light with a light meter, it reads lumens. And this measurement of all the lights that contribute to the light at that location creates a measurement called foot candles. But let’s think about that light that is being measured. Metal Halide creates all sorts of light, in all spectrum’s, visible or otherwise. This includes UV and IR spectrum’s, visible to the measuring device but not visible to the human eye. LED, on the other hand, does not produce UV and IR. Therefore, its readings using the same light meter is only picking up visible spectrum’s.

So there is a fun little test you can do. Have 2 light sources, LED and Metal Halide. And first ask, which one is brighter? And if the right LED source was selected, they should say LED. And then use a light meter, and the light meter may say the Metal Halide area is producing more foot candles. And so now you know part of the reason, but wait, there’s 2 other pieces of information you need to know.

Click here to see our infographic on Retrofitting vs Replacing.

Conclusion

Routine electrical service and maintenance is critical for all home or commercial buildings in the Des Moines Iowa area.   When you have routine electrical service done, it will keep your important electrical systems running longer and help you avoid expensive future repairs. In the event that there is an issue with your electrical system, your electrician can identify it during this routine visit so that repairs can be done before the problem becomes larger or even becomes an electrical fire.  Schedule your local electrician today and have your electrical system checked out.