Chandeliers look beautiful when installed in your Plano home, but the process of properly installing them should be left to a qualified, experienced electrician Plano homeowners can trust. Proper installation of a complex electrical fixture like a chandelier is best left to a licensed residential electrician who understands the intricacies of adding a chandelier to your home and who can make sure that the process is carried out safely and efficiently so that your fixture has a long life with little need for repairs.

Tips for Chandelier Installations

Instead of finding an electrician Plano homeowners sometimes opt to do a chandelier installation themselves. What they don’t realize is that chandelier installations are very difficult and complex, and as a result it’s always best to contact local electricians who are experienced to do the job. installation chandelier that is installed incorrectly can mean many costly and dangerous complications in the future. Follow these important electrical tips to ensure your chandelier is properly installed in your home.

Electric Man: Electrician Plano Homeowners Can Count On

With 27 years of experience, Electric Man offers quality emergency and routine electrical repairs for residential and commercial applications. Whether you need a chandelier installed or you have an electrical emergency of any sort, Electric Man can send a licensed and experienced electrician Plano homeowners can count on. Call us today 972-792-7270 and connect with us online. If you have questions for Electric Man, leave in the comments section of our blog, and we’ll get right back to you!

Fixing the wiring in your home is not something that you want to trust to just anyone. The possibility of shocks and electrocution as well as the danger of electrical fire presented by a poor wiring job are too serious to risk doing your own electrical work, and an inexperienced electrician can provide shoddy work that impacts your safety and your wallet.

For all things electrical, from installing a new outlet to rewiring a new addition, you need the skills, training, and experience of a licensed electrician. There are many good reasons for narrowing your search to only include local electricians.

An electrician who works and lives in the area is most familiar with local building codes, material vendors, and the procedures necessary to get the required licenses. What’s more, electricians are licensed by individual states (and the District of Columbia) and are only permitted to work in those state(s) where they have passed the licensing exam and where they meet the continuing education requirements.

Another good reason for working with a local electrical contractor is that when you work with a local small business, the dollars you spend stay in the community rather than going to the corporate offices of a large company or big box retailer. Local electricians are your neighbors and will spend the dollars you give them at local restaurants, retailers, and community service programs.

Lastly, though possibly most importantly, local electricians rely on their reputation for their livelihood. They’d be out of business quickly if satisfied customers didn’t recommend them to their neighbors, co-workers, church members, and friends. For that reason, a local electrician has an extra incentive to do quality work on your project.

At Kolb Electric, we’ve been helping Maryland, Northern Virginia, and Washington, DC homeowners with their electrical needs for more than 90 years. We live right here in the communities near you, shop in the same stores, and support the same businesses. We’re familiar with the houses in this area as well as the local building codes and licensing requirements. We also know where to get the best prices for you on quality electrical supplies.

To learn more about how Kolb Electric can help you with your next electrical project, large or small, call us at 877 287-1179 or contact us online today.

By providing early warning in the event of fire, smoke detectors can allow you and your family sufficient time to reach safety. Experts report that you can increase your chances of surviving in a home fire by 50% simply by having smoke detectors. Click here for more information about installing  smoke detectors in Los Angeles, my electrical company’s service area.

If your house was built before 1950, it likely has electrical wires with cloth insulation. Over time, the cloth dries out and becomes brittle. Eventually, it crumbles off the wire, exposing bare wires that can short-circuit and cause shocks or fires. Old cloth-insulated wires should be replaced with plastic-insulated wires. Plastic insulation lasts indefinitely and completely resolves the safety issue. Click here for more information about replacing cloth  wiring insulation.

The National Electrical Code requires that outlets in the vicinity of water be equipped with a device called a “Ground Fault Circuit Interrupter” or GFCI (also called GFI). GFCIs are required in all bathrooms, kitchens, garages, pools, and some outdoor areas. GFCIs can protect your family against deadly electrical shocks and are inexpensive to install. Click here for more information about GFCIs and GFIs.

Knob & Tube wiring gets its name from the white ceramic knobs around which wires were wound and the short ceramic tubes through which wires were guided. This type of wiring is usually found in homes built before 1935. In the Los Angeles and some other parts of the country, knob and tube can sometimes be seen in houses built as late as 1950. My electrical company specializes in replacing Knob and Tube wiring in the L.A. area — much of it is in Pasadena and other parts of the San Gabriel Valley.

Knob & Tube systems use old cloth-insulated wires and are not grounded. We strongly recommend that Knob & Tube wiring be replaced to eliminate fire and electrical shock hazards.

An electrical surge is a sudden increase in power that flows through electrical wires. Surges can cause damage to computers, phones, entertainment systems, microwaves, stoves, fridges, washers – any device that has electronic components such as sensors and timers. Today, that’s most appliances. A Whole House Surge Protector can save your appliances and electronic devices and save you thousands of dollars in damage.

Look for our $50 discount coupon for the installation of whole house surge protectors at www.theelectricconnection.com.

A properly grounded electrical system routes occasional leaking electricity through a “ground wire” into the ground. Without grounding, excess electricity can cause fires, damage to electrical appliances and computers, and also shocks to residents.

Older homes built under earlier electrical codes will often have outlets for two-prong plugs. This is often an indication of an ungrounded electrical system. Sometimes, the outlets have been replaced with the modern three-prong type, but without actually adding a ground wire. This can make it appear that the system is grounded when it’s not.

Even when your wiring system has a ground wire, the grounding may fail due to loose or corroded connections and splices. A qualified electrician can check your wiring with a special tester to determine if it’s fully grounded. The Electric Connection offers this testing as a free service with every electrical job that we do in the L.A. area.

There is now conclusive evidence that both Zinsco and Federal Pacific Electric (FPE) “Stab-Lok” electrical panels can fail. (Electrical panels contain your circuit breakers or fuses.) Fires and electrical shocks can result. These brands were installed in the 1950s to 1980s. The failure rates as they age are much higher than for other brands and represent a real electrical hazard. We recommend all Zinsco and FPE electrical panels and circuit breakers be replaced with modern electrical equipment. Click here for more information about Zinsco and Federal Pacific electrical panels. One of the specialties of The Electric Connection is panel upgrades. We’re possibly the most active company in Los Angeles when it comes to electrical panel replacements. We offer a free safety check of your L.A. electrical panel box with every job.

Circuit breakers and fuses protect your electrical wiring from overloads of electricity. Overloading can melt wires and cause fires and electrical shocks. Whenever a wire is overloaded, the circuit breaker or fuse is supposed to cut the flow of electricity.

Sometimes older circuit breakers don’t work fast enough and allow too much current through. Fuses can also be a safety concern. Sometimes, they’ve been replaced with improperly-sized fuses and no longer protect wires from overloading. These safety issues can be solved by installing modern circuit breakers. Click here for a coupon for a free check of your electrical circuit breaker box with your next electrical job.

Most homes have copper electrical wires. However, from the mid-1960s to the mid-1970s, over 2,000,000 U.S. homes were wired with aluminum. The U.S. Consumer Products Safety Commission has determined that aluminum wiring is hazardous as, over time, connections and splices can fail, resulting in fires and shocks.

Fortunately, a qualified electrician can upgrade an aluminum wiring system without replacing all the wires with copper. It’s possible to eliminate the fire hazard by upgrading only connection points and splices. Aluminum wiring safety retrofits should be done only by electricians specifically trained to upgrade aluminum wiring safely.

If you think it’s possible that your Los Angeles home has aluminum wiring, you can get a free checkwith your next electrical job. One of the specialties of The Electric Connection is efficient and effective safety upgrading of aluminum wiring in the Los Angeles area.

Click here to visit our website.