One of the best things you can do to protect your home and keep your family safe is to add motion sensor installation to your Fairfax, VA property. Simply put, when someone is close enough to your home, their motion is detected and a light comes on. This bright light deters intruders, alerts neighbors and makes you aware of what’s taking place on the perimeter of your house.

Bright lights are an intruders worst nightmare. Thieves and home invaders thrive on the hidden cover of darkness. Motion sensors also protect your home when you’re away. You’ll feel more secure knowing anyone approaching your home will be seen by neighbors and passersby.

The most common places to install motion sensors are in close proximity to garage doors, porches or patios, backyards and front and back entry doors. A quality motion sensor also helps illuminate your walkways as you approach your home after dark.

Motion sensors can even help decrease your electricity bills. Because motion sensors only come on when movement is detected, they are less costly than porch and other exterior lights that must run continually. No more hunting around for light switches in the dark, either.

The living room seems a little dim, you think. Here’s the DIY solution you cook up: you head over to the hardware store, buy a brighter bulb, screw it into the nearest lamp and bask in the incandescent glow. Easy, right?Not exactly. Using a lightbulb with higher-than-recommended wattage for a specific fixture is known as overlamping. This seemingly innocent practice is actually surprisingly dangerous, and is one of the leading causes of house fires in the United States — right up there with candles, smoking and cooking mishaps.

Overlamping is one of the most commonly overlooked mistakes a homeowner can make, and it can be deadly. A 2011 electrical fire that killed 11 people in Brisbane — the according to home improvement blogger Taryn Williford. When you place an incandescent bulb with wattage that’s too high in the socket of a lamp that cannot provide the required electrical output, the ensuing heat and intensity of the bulb can scorch or melt the socket and the insulation of the lamp's wiring.  

Now you have prime conditions for arc fault. An arc fault occurs when a spark jumps through the air between exposed wires. This sounds dangerous, yes? It is — in fact, the National Fire Protection Agency and the National Association of State Fire Marshals electrical power. A CFL often has a tubular shape atop the familiar screw-bottom.

An LED (light-emitting diode) light is directional, rather than radiant. This allows the LED to use much less energy than an incandescent light or even a CFL. LEDs can also directly replace incandescent bulbs in some cases.

CFLs use a much lower wattage than incandescent bulbs and create far less heat, making overlamping situations far less likely. LEDs also use much less electricity and even remain cool to the touch. The risks of overlamping are negligible.

There are drawbacks to any lighting solution. Incandescent (even halogen) lights are energy inefficient. CFLs are made from materials that are terrible for the environment. LEDs burn out at a quicker rate. The right light for you is the light that makes you most comfortable in your home — and that’s a decision you need to make.

If you live in Maryland, Northern Virginia or Washington, D.C. and need schedule electrical repair service online now.

The United States has three main power grids: The Eastern and Western Interconnection, which each service multiple states, and Texas, which gets an independent power grid. The Electric Reliability Council of Texas, or ERCOT, handles 85 percent of the state’s power needs, producing and distributing electricity to 23 million people.

But, why does Texas need its own grid?

Slate reports that during World War II, Texas was home to many factories required for critical supplies. The electrical planners didn’t want to depend on energy coming in from other states, so they used the abundant natural resources to set up a grid specifically for Texas. Even today, this state requires a massive amount of electricity to keep the industrial sector powered, so it makes sense to have a dedicated grid.

Texas has a strong culture of self-sufficiency, which had an influence on the development of its own energy grid. It does have links to the other interconnections, which get used during particularly high demand periods. Unusually hot summers or long heat waves can sometimes lead to Texas importing energy, so the air conditioners keep going strong.

The utility companies governed by the ERCOT typically do not sell energy outside state lines. This configuration allows Texas to set most of its own rules and regulations, as opposed to the Federal Energy Regulatory Commission setting oversight in place. State regulators can make decisions that make the most sense for their residents, rather than making adjustments based on the needs of multiple states.

Texas has the space and natural resources needed to produce inexpensive electricity for residents and businesses. These costs fall below the national average. Renewable energy sources, such as wind-powered electricity, are moving Texas to more environmentally friendly options.

However, inexpensive energy does have a downside. Population growth in Austin is significant, thanks to startups, tech companies and other businesses moving into the area. Google Fiber also plays a role in bringing in more people. The energy grid needs to adapt to the rising amount of individuals who call Texas home, but electricity companies have less of an incentive to build in Texas compared to states with higher energy costs.

Contact Bryant Electric Service to make sure you’re getting the most out of the Texas Power grid and take back your energy today!

Any room, area, facility, or outdoors space you need to illuminate should be done so with quality lighting. The benefits of quality lights far surpass going cheap on your lighting fixtures just to save a few dollars. The importance of quality such as metal halide have a rather short lifespan compared to it’s competing technology, LED. LED gymnasium lights, and just LED lighting in general, prove to have a much longer lifespan. This lifespan can be 2-3 and sometimes even 4 times longer than other light sources such as metal halide.

This can allow for less frequent purchasing of new lights to replace old and burnt out ones, which will allow you to better realize a better ROI by investing in LED over metal halide or other similar technologies. This also indirectly reduces your maintenance costs by lowering the amount of time you have to pay someone to switch out burnt out bulbs. This can allow you to reduce your maintenance costs related to your lighting for gym areas by 2-3 times, which will just add on to the benefits that LED can bring to your facility.

While saving money through lighting efficiency, longer life spans, and less maintenance costs is great; it shouldn’t be achieved while decreasing the quality of light produced in your facility by your lighting system. Luckily, LED products allow for proper lighting in a wide range of applications, even your gymnasium. This allows you to create exceptionally safe areas that will keep visitors aware of all there surroundings.

Did you know that LED lights that are efficient called the DLC (DesignLights Consortium). This is an organization that qualifies commercial lighting products based on it’s quality and efficiency. There are both standard and premium qualifications, and premium typically yields higher rebates and thus higher ROI over standard qualified products. Although both are still good and are always recommended for any industrial lighting purchase because being qualified is better than not at all. Without being qualified, we recommend you stay far away from any light that isn’t DLC qualified for various reasons including it not being verified to be a “good” product.

If it isn’t clear by now, the answer is obvious. LED can, will, and should be bringing your gymnasium area all of the benefits that the technology offers.

From efficient, to quality and rebates; there is almost no reason why you should choose other gym lighting technologies over LED gym lights.

More importantly regarding safety of all visitors; LEDs will ensure your areas are properly illuminated with a wealthy amount of light, and won’t be under lit. Also since LEDs will never buzz nor flicker, you will never face that annoying issue that other technologies will do, not even near the end of it’s lifespan. And as you know, buzzing or flickering lights can cause annoyance and less focus, which is never good for a gymnasium environment.

Conclusion

There you have it, what quality LED lights can and will do for your gym. LEDs are also a great option for all of your other lighting needs, such as school rooms, hallways, write in to one of our professionals for some answers.

Energy-efficient residential homes are becoming increasingly popular in Canada which is good news for both the environment and our economy. Having an energy-efficient home also helps Canadians save big on their electricity bills. Expert Electric has been helping homeowners improve their home’s energy-efficiency for many years. For help on how to make your home more energy efficient, here are some actionable steps that you can take.

One of the best ways to make your home more energy efficient has to do with your home’s thermostat. Properly programming your home’s thermostat is essential in saving big on electricity costs. Many people overlook the impact of their home’s thermostat and leave it on all throughout the day, whether they are home or at work. By programming your thermostat to run only during the times when you are home, you will keep your home warm and see a big improvement in cost savings. Always remember to turn your home’s thermostat down when you are not at home. Your wallet will thank you.

Is your home properly insulated? Insulation is important in making your home more energy efficient. Insulation can help keep your home warm during the Winter months and keep your home cool in the Summer. Your home’s insulation is an important investment that can help you save lots of money in the long-term.

Make use of your home’s windows by pulling back the curtains and allowing the natural light to enter during the day. Sunlight is the most energy-efficient source of light in your home because it is free to use.

Making the switch (pun intended) to compact fluorescent lamps (CFLs) or light-emitting diodes (LEDs) can result in big cost-savings for your home. These lights are known to last longer and use up much less energy. Halogen light bulbs are another energy-efficient option for Canadians looking to reduce their electricity costs. Similar to CFLs and LEDs, these light bulbs last much longer than regular light bulbs and require less energy to operate. Make your home more energy-efficient by switching to one of these three types of light bulbs today.

For questions about how to make your home more energy-efficient, please contact Expert Electric today. We offer a variety of different residential and commercial electrical services including standby generator installations, ceiling fan installations, hot tub wiring and more. Call us today at 604-681-8338.