To call this winter brutal in terms of snowfall would be a bit of an understatement. For those of us who have been in the Boston area for some time, we can only liken it to the blizzard we were pummeled by way back in ’78. While you may be enjoying a respite from the snowfall as we move slowly towards the spring season, it is important that you keep in mind the fact that all of this snow, including that on your roof, is going to melt.

When snow melts off of your roof, it can fill your gutters with water which then refreezes when the temperature drops back down. This can result in ice dams, which can lead to serious problems with your home, including roof leaks and damaged gutters. FB Electrical Services can help you to avoid issues with ice dams in Boston and the surrounding areas.

With the help of electrical resistance heating, you can melt the ice that would otherwise build up in your gutters, making it impossible for water to drain appropriately. Electrical coils can be installed beneath the roof and dip into your gutters in intervals, allowing for the heat from the coils to thoroughly melt any ice that builds up therein. When you melt this ice in the gutters, as well as that built up in a layer upon your roof, you can divert the water away from your home just as intended via your drainage system. This certainly beats having that water dripping into your home, damaging your roof and ceilings.

Nearly every single person living in the United States relies on the electrical grid. It's how electricity gets from the power plant to your home, powering your devices and appliances. With no grid, none of the electrical work in your home will function – no television, no air conditioning and no electric lights. Our grid is changing, however, taking advantage of evolving technology on both the distribution and consumer side of the equation. Read on to learn more about how our electrical grid will evolve to meets the needs of the 21st century.

How to Balance Supply and Demand

The electrical grid is not a single object, but rather a giant network of power plants and transmission lines that spans the entire nation. In order for electricity to flow from the generating stations into your home’s electrical work, the grid needs to be able to meet the demand at any given time and place. This can be an enormous challenge – if there is too little production, consumers can be subject to annoying and damaging brownouts. Ramping up generation to meet variable demand is expensive and inefficient, however.

Some utilities solve the problem with time-of-day pricing, charging more during the day and less at night to smooth out demand. Smart technology, however, will allow us to fine-tune the grid even further to increase efficiency, improve communication and mitigate blackouts or other power outages.

Smart Meters and Dispersed Generation

Smart meters are one of the first steps toward our new grid. These meters track residential electrical consumption in real time and can communicate with the utility company instantaneously. They can allow producers to better predict demand, respond immediately to dips and spikes, and further refine variable pricing structures that incentivize people to use less electricity during peak hours. Smart meters also give homeowners the power to see where and when they are putting the most stress on their electrical work, allowing them to adjust their behavior strategically.

Changes are coming to the generation side as well. Traditionally, the electrical grid is powered by large, centralized power plants, but residential solar installations mean that generation is becoming more widely distributed. Wind generation is also becoming an ever-larger factor in our nation's energy supply. This means that the grid needs to be updated to become more flexible and adaptable, but there is a large payoff in sight – the more dispersed that power generation becomes, the more resilient the grid will be in the event of an outage, with smaller regions able to supply themselves with emergency power if they are cut off from the centralized system.

Makes Tomorrow's Energy Grid Work for You

No one knows exactly what the power grid will look like 100 years from now, but the nation is well on its way to updating its electrical infrastructure to meet the needs of this century. If you have any concerns about how your electrical work will interface with the power grid of the future, or need any other work done on the wiring and circuitry in your home, call an expert electrician today.

Aluminum LED profile housings allow you to create customized light fixtures with LED strip lights. Our Klus brand LED channels are available in many different styles, including recessed-, or flexible, O-shaped, and more. Available in 1- and 2-meter lengths, the channels can be easily cut for any application from under-cabinet lighting and bookshelf lighting to showcase lighting and transition strip lighting. They’re available with a variety of lens options, such as clear, frosted, and etched that complete the profiles. We’ve put together a step-by-step guide for using these channels to create your own light fixtures. Please note that your specific channel might vary from the one used in this tutorial.

Materials needed:

1. With a pair of clippers, carefully clip through the clear plastic heat shrink as shown in figures A-C. You will want to take your time and be careful not to cut the strip’s wires while removing it.

2. Lay the LED strip into the channel, and position it along the bottom so that the ends of the strip and the channel are lined up (fig. A). Now, remove the paper from the strip’s adhesive backing (fig. B), and adhere the strip to the LED channel—starting at the lined end and working your way to the other end of the strip. Be sure to leave roughly 1/4-inch free at the end of the channel so that you can install the end cap as shown in figure C.

3. If one of your end caps doesn’t come with a pre-drilled hole, you will need to drill your own to allow the wires of the LED strip light to come through. In this case, we used a Dremel tool, but other options are viable as well. Regardless of the tool you choose, it is helpful to mark the end cap where you would like the wires to come through. Start the hole small, and increase the size as necessary.

4. Place the end cap on the wired side of the strip by threading the wires through the end cap as shown in figure A. Insert the end cap into the end of the light bar, and push firmly until it is fully in place (fig. B).

5. On the open end of the bar, slightly peel up the end of the LED strip (fig. A); this is necessary to install the end cap. Now measure your channel lens, and trim off the excess with clippers (fig. B). Be careful when trimming to avoid cracking the plastic. Excess material can be lightly sanded off. Once the lens has been cut to the proper length, slide it into the channel, and install the end cap as shown in figures C and D.

6. That’s it! Your customized LED light fixture is complete and ready for installation, which we will cover in the next step.

7. Mounting this LED profile is as easy as applying double-sided tape to the back of it and sticking it to your intended surface. Be sure to cut the tape to fit the back of the LED profile and to leave the tape backing on the side not attached to the channel until you are ready to mount it.

For most LED profiles, mounting clips are available for a more permanent installation.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.