Tripped circuit breaker: many of us have experienced them at some point in our homes, yet instead of asking ourselves, “Why Do Breakers Trip?”, we reset the breaker without much thought. Before flipping the switch back over to the “ON” position, however, it’s important to understand why the breaker tripped in the first place, and what can be done to keep it from happening again.

As a Top Dallas Electrician, ElectricMan Inc. understands the danger of ignoring the warning signs of a tripped circuit breaker. But first, you need to know what a breaker does and how it works.

The Job of the Circuit Breaker

Simply put, a home or business circuit breaker is a safety device that monitors the amount of electrical current going through the electrical wires in your home and shuts off the circuit if too much electricity is being pulled through it, or if there is any disturbance in the current that could result in a fire.

Whereas a fuse performs the same task but can only be used once, a circuit breaker can perform over and over with the use of a switch that trips to indicate when it has effectively cut off current to a particular area.

What Makes a Breaker Trip?

So, Why Do Breakers Trip and what kind of things could cause a circuit breaker to trip? Some of the most common causes of a tripped breaker include:

For example, in some homes, running a microwave, a toaster oven and a refrigerator all on the same circuit may cause your wires to overheat, tripping the breaker. In this instance, making the load a little lighter, or splitting the circuit, may do the trick in keeping it from tripping the breaker.

Ignoring a Tripped Breaker is Not a Good Idea

Because of the many reasons why your circuit breaker could be tripping, and because of the purpose of the circuit breaker, you should never take a tripped breaker lightly. It’s important to understand that the circuit breaker is a safety device; simply switching the circuit back on without investigating the culprit can become costly in the long run and, in many cases, extremely dangerous.

If your breaker trips consistently, chances are there is a potentially dangerous electrical issue that needs to be looked at. ElectricMan Inc. is a Top Dallas Electrician with over 27 years of residential and commercial experience in the electrical field. Call ElectricMan Inc. at 972-792-7270 to make sure that your home is safe and free from the risk of a short or a fire.

Do you have enough smoke alarms in your home? The odds are probably not if we’re going by statistical averages, and if you’re here reading along then you also are probably thinking about installing more. Which is good! But you might also be thinking about wiring them yourself, and that might not be the best option you have. Why? Today the certified professionals at Hoffman Electrical are here to help you understand.

The electrical installations on your property are largely out of sight and it’s why their maintenance gets sidelined. Over time these systems suffer a certain amount of wear and tear; when that happens, it impacts the appliances and equipment that operate on those circuits. Eventually, you will find yourself dealing with electrical emergencies more frequently than you would like to.

The best way to avoid these problems is to hire the services of a skilled electrician for regular electrical maintenance. Once you have identified a good company for the job and opted for an annual maintenance contract, they will come over to your premises and conduct a thorough inspection of all the electrical installations and fixtures. They will check everything from the main switchboards with the circuit breakers, the electrical wiring as well as the actual powerpoints.

They will use the latest inspection equipment in their work and look for signs of damage or wear & tear. Not many property owners consider electrical maintenance to be an essential service. However, there are a number of benefits to getting this done on a regular basis:

The best way to keep your overall electrical maintenance costs low is to look after the electrical systems on your property. There are different things you can do to keep problems at bay, such as:

When you opt for regular electrical maintenance, you won’t really have to face sudden problems with wiring or fixtures. However, if you do notice that something isn’t working the way it is meant to, never delay in calling in an electrician to conduct a thorough check on the system. The different signs that something may be wrong with the electrical installations in your home are:

If you have noticed any of these signs in your home, you should call your local residential electrician without delay. We at All Round Electrical are one of the leading companies in this space and provide customised and cost-effective electrical services.

For any information about our preventive electrical services, simply speak with the experts at and take their advice on various aspects of electrical installations in your home. The number to call is – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

If you recently had a pole building or shop put up on your property, you are probably debating to have it powered with electricity or stick with a generator. There are clearly some real benefits to a shop having electricity. If you are simply using the building to store items, than electricity is probably not a major concern. However, if you are planning to use your shop to work on various hobbies or use it to repair vehicles, electricity is extremely helpful. You will need a Burbank electrician to go about completing the wiring process. You can depend on the team at The Electric Connection to help you make your shop complete with electricity.

Depending on the amount of electricity you need in your shop, you may need to have a sub-panel installed. This is something your electrician will discuss with you and advise you on. If your home is already using the majority of the breakers available in your existing panel, you will need an upgrade or an additional panel installed to run the shop. The size and type of the tools you will use in the shop will influence your decision.

Once you have decided on the electric panel situation, the next stop is to discuss outlet placement with your electrician. Burbank shop owners can decide how many outlets they need in the shop. You may even need a 240-volt outlet to run certain heavy machinery or to plug in a Level II electric car charging station. These are all options for you to consider when you make the decision to hire an electrician. Lighting is yet another element you will want to think about. Typically, a single fixture is installed along the ceiling and then several lamps will be used to illuminate specific work areas. If you would like to discuss running electricity to your new shop, give The Electric Connection a call today.