Don't get caught in the dark if a storm or other disruption knocks out your power. You can protect your home and your family with a backup generator. Read on for tips on how to pick out the right one for your house.

Why Do I Need A Generator?

Blackouts are unpredictable. Of course, you can have family fun in a power outage, but if the lights stay off for an extended period of time it can mean trouble. If you rely on electric heat and the power doesn't come back on promptly in cold weather, your pipes could freeze and your home could even become too cold for human habitation. In the summer, you can end up sweltering with no air conditioning while all the food in your refrigerator spoils. Smart homeowners are prepared to keep their electrical systems up and running no matter how long it takes the utility company to restore power.

What Are My Options?

You can buy a small portable generator if you just need to keep a few appliances functioning. Plug your equipment into the portable generator directly, or a special connection to your circuit box can be installed to allow you to plug into your wall outlets as normal. Be careful not to overload the generator, or you can cause it to short out. 

A standby generator is the best option if you want to keep your whole house online. Standby generators run off your gas connection (or you can attach a propane tank) and they turn on automatically when the power goes out. Standby generators are simpler to use once they are installed because you don't need to worry about cords or even turning it on yourself. However, they can cost $10,000 or more.

You should choose the size and power of your generator based on how much electricity you will need in an emergency. Adding up the wattage of all the equipment and appliances you want to keep online will give you a baseline to use as a guide. Portable generators range in capacity from 1,000 watts to around 17,500 watts, while heavy duty standby generators can handle up to 30,000 watts and above.

Safety First

If you get a portable generator, never run it inside. Find a level surface at least ten feet from your house, and connect properly-rated extension cords to the appliances you want to run. Because most portable generators burn gasoline, placing one too close to your home can put you at risk of carbon monoxide poisoning. Don't forget to inspect the extension cords for any fraying or damage and ensure they are rated for outdoor use.

Never modify an extension cord or plug your portable generator directly into a wall outlet. This will send electricity back through your circuit box and onto the grid, creating a danger to utility workers fixing the wires.

Choosing the right generator, not to mention properly installing it, can be tricky. Call an expert electrician to help you purchase and set up your new generator so you know that the lights will stay on the next time the power goes down.

Call local Mister Sparky® for generator advice or assistance. We're always here to help!

We’ve touched a bit on the subject of Do It Yourself solutions in the past. Mostly making mention here or there of when it is, and is not, a good idea. But at Kolb Electric, your safety is always our absolute primary goal. So rather than leave it at a mention, we wanted to take some time to tell you some important points. 

We support all kinds of on-your-own projects. It’s a great way to get a new skill set, or polish one you already have. Plus, nothing beats that feeling of accomplishment you get from creating or building something all on your own. But when it comes to DIY electrical work, we would firmly call it a really bad idea.

It really comes down to one major point: harm. It is entirely too easy to cause harm to yourself, to others, or to your personal property. If you follow along with our blog, you may remember a point we made in the article about “What It Takes To Become An Electrician”. In that post, we mentioned that anyone pursuing an education in electrical work pay very close attention to the safety aspects of learning.

This is because electricity, by nature, is highly volatile, and can be hard to predict without training. It only takes one, single misstep and suddenly you, or your home, is on fire. There are plenty of articles out there on how to wire an outlet, or replace a ceiling fan, but please be aware that 1) these articles are rarely comprehensive and 2) reading something and doing it are two very different things.

The U.S. Consumer Product Safety Commission has stated that roughly 400 domestic electrocutions occur every year. And of the estimated 360,900 residential building fires reported, the leading cause is electrical issues and mistakes. We really want to nail home the point that this kind of work takes training and experience to work well. Without these two things, you risk:

Fires that result in catastrophic property loss can even be caused by incorrect bulb wattage, so please keep in mind that something as intense as rewiring should be handled by a trained and certified professional.

Next time you need electrical work, trust in the certified professionals at Kolb to get the job done right! Don’t risk yourself, and your investments on a personal side project. Contact certified electricians today to learn more about our comprehensive electrical services.

The list of rules to be followed when installing new electrical systems into a building are related to the specific rules of the state, as well as certain minimum requirements laid down by Federal law. So in some senses the United States does not have a unified Electrical Building Code, because often there are variations between different states.

It was to address exactly this issue that the National Fire Protection Association, a panel of nineteen different bodies, began publishing the National Electrical Code (NEC) in 1897, and now every three years, in order to arrive at a single source of rules that should govern electrical installations. The current version was published in August 2010 and runs to over 1000 pages.

Whilst the NEC is not law as such, in practice it has been adopted by most states as their set of rules for electrical installations and wiring in buildings (with a few changes here and their depending on the state you are in), and so is now in practice the Electrical Building Code for the United States.

You can read the full 1000 pages plus version online for free here: Building Codes

This is the book that all Journeyman Electricians will consume when undertaking their training, as it is pretty much the standard version across the country.

Though there are some differences between the states, and you can see the individual requirements for your state here: State Regulations

Some of the key NEC rules that need to be followed when installing a new electrical system into a building are:

If you are planning on installing electrical wiring then you should refer to the NEC and your local Electrical Building Code for specifics and to the link above for any state specific requirements that you need to know.

When it comes to home repair and renovations, many people attempt to handle their home improvement on their own when it should be left to the experts. Due to the abundance of television shows depicting do-it-yourself couples attempting to renovate old properties and the consistent bombardment of commercials from big box home improvement stores, fixing anything around your Des Moines home seems like something you should be able to handle yourself. Whether you are a seasoned handyman who has been handling home repairs on your own for years or an inexperienced homeowner working the kinks out of your first home, there are a number of tasks that absolutely must be left to the professionals because errors and mistakes could lead to severe injuries that could even prove to be fatal. Many of these scenarios require the work of a residential electrician, and a common one is electrical trenching.

Electrical trenching is the excavation of your property to prepare for electrical installation, and it could end in tragedy if you do not call an expert. While digging a ditch does not seem like something that would require a residential electrician, it is especially necessary when handling electrical issues. A residential electrician will not only be experienced in handling the electrical trenching, but they are also aware of the safety precautions. Under your lawn, various utility lines are running ranging from water to gas to electric. And if you were to damage one of these services, not only would you be at fault, but you would also be placing yourself in grave danger.

Do not start digging up your yard without first consulting an expert residential electrician. When you need electrical trenching in Des Moines, call the Electrical Guru’s at 515-446-7040 so we can safely and professionally handle the electrical trenching for your home.

As a Licensed Dallas Electrician, I’ve learned (and shown you) that it’s easy to save money on your electric bill if you think ahead and put some consideration into the choices you make.  But saving money sometimes means making a trade-off. Far too often, that trade-off has been the environment.  More coal and gas power plants produce more electricity when we want it, but the price is pollution. It’s not a price we always have to pay ourselves, so we tend to ignore it. But our children aren’t going to have that luxury.  Thankfully, people are starting to really think about the effects our choices will have on our descendants. That being said, a lot of “green” initiatives are really expensive, and with the economy like it is, people are stretched too thin to really make an impact.  But what if there were ways to not only help save the environment, but save money too?

That’s the best news of all: there are ways to do exactly that. Solar PV and Wind Power have been around a very long time, but they’ve always been impractical and difficult to apply for your own use. For instance, wind farms may generate a lot of electricity, but they’re expensive, huge and mostly benefit electric companies.  Most people don’t have millions of dollars to spend on a huge windmill, after all.  But technology has improved rapidly over the last year or so, and renewable energy sources are not only finally available to individual consumers, but are quite affordable and efficient.  Anyone can now buy a solar panel or a small wind turbine with Power Storage to help power their home or office.  These power sources provide freedom from the power grid. No more outages when the rest of your neighborhood goes dark or spikes in your power bill.

Wind turbines are much better designed than they used to be.  Unlike the old models, which had motors designed to turn them into the wind, these turbines spin no matter which way the wind blows, which means they’re much more efficient and less prone to motor failures. They don’t have to be powered exclusively by natural wind either; turbines can be powered by wind coming from man-made objects. In fact, in the future you might well drive down the highway past a long line of wind turbines, spinning with the wind your car makes as you pass!

Of course, there are still a few limitations to Solar PV and Wind Power.  Despite the great advances in technology, the sun doesn’t always shine and the wind doesn’t always blow. Of course, at times like these there are other options.  The energy produced by your solar panel or wind turbine can be stored in an indoor generator Power Storage unit. A quality indoor generator can help you not only be free you from outages, but can even generate extra electricity – electricity the electric company will pay YOU for!  A wide variety of these generators are available to meet your needs, but any of them can help you save money, help provide better power options for you, and leave behind a better, cleaner planet for future generations.