In just about any home you visit, the kitchen is often the focal point and the most frequented area. Think about the amount of work that gets done in such a small amount of square footage. With massive appliances like a fridge, stove, or dishwasher doing hours of work a day, it is important that your home electrical system has been planned and installed properly to support this work force.

In the kitchen you have some of the most energy hungry appliances you can find in a home. The energy to keep these running comes from the electrical outlet. If the outlet is not designed to give the amount of electricity that the appliance requires there can cause damage to the appliance and to your home’s electrical system. For some of the main appliances in the kitchen the electrical outlets should be:

Of course with the size of the appliance these requirements can vary. As fridges become larger and stoves get more features, the appliance may require much more. It is important to check the requirements of your new appliances prior to installation. Make sure that you have an expert electrician check your outlets and compare them to the requirements of your new appliances.

To make sure appliances are getting the right energy requirements, you can follow the outlet to the electrical panel. When there is a heavy load on a circuit, it is important to check that the appliances are given their own circuit and that the wires behind the wall are up to code to support the capacity. If too many appliances are on the same circuit you can continuously trip the circuit causing larger problems in the long run. Also, if the wiring does not comply to code there is a chance of an electrical fire. This is a scary problem because it can hide behind the walls for years before it can happen.

If you are planning on purchasing new kitchen appliances or remodeling your kitchen make sure that you have done your homework. Review what your kitchen and home’s electrical system are capable of and what your new appliances require. The best way to know for sure is have an expert electrician do a thorough review before installing the new appliances. This can not only put your mind at ease, but avoid expensive bills in the future.

Electrical motors are devices that convert electrical energy into mechanical force. They operate on the principles of electromagnetism, using the interaction between winding currents and magnetic fields to generate force. Some motors, like those used in the transportation industry can reverse the effect and generate electricity too, converting force into electricity.

Many industrial plants attribute over 70% of their power consumption to motors, so even a slight increase in efficiency can dramatically cut energy spending and improve profits too.

Spring is here and that means those wild and loud thunderstorms are here as well. Lightning can be nice to look at, but as we all know, it can be dangerous. While you are probably safe in your home during a lightning storm, your appliances and electronics are not. One lightning strike can wipe out anything that is currently plugged in, in your home.

If you are not interested in spending thousands of dollars replacing computers, televisions and any other appliance in your home, you will probably want to invest in a whole house surge protector. An electrician in Los Angeles is exactly what you need to save you a great deal of money in replacement costs.

Surge Protectors

You probably have your computer plugged into one of those strips that offers a layer of protection against an electrical surge. But what about your expensive gaming console, refrigerator and television. With just those three items, you are taking well over a $1000. It isn’t feasible or attractive to plug in every electronic device to a surge protector strip.

However, whole home surge protectors are available. And what is even better is the fact they are a fraction of the amount of the cost it would take you to replace your electronics. They are fairly simple to install by an electrician. Los Angeles residents who are interested in protecting their electronic investments can call the Electric Connection to discuss their surge protection options.

It is important to note that not all electrical surges come from lightning strikes. Large appliances like the refrigerator or air conditioning unit cycling off and on can also cause spikes in power, especially if they are not in good working condition. You never know when a surge will strike. It is better to be safe than sorry.

Demand for the electric cars has been on upward trend over the last few years. However, manufacturers and car owners still face a challenge due to the limited battery capacity which necessitates the need to keep on recharging after traveling a certain distance.

Despite the benefits of charging the electric cars at home, most residential installations, especially the older ones, may not support the systems. But the consumers can upgrade these to accommodate the additional load. The upgrade depends on the existing wiring, panel, capacity and charging station power requirements.

electrical wiring and capacity, and the charger voltage and level. The electric car owner must first decide on the preferred type of charger and time, and then compare its power requirements with the existing capacity at home.

Some chargers require 120V while others work on 240V and each takes different times to fully charge the batteries.  Higher voltages will require dedicated circuits and upgraded wiring, breakers, panel and service entrance.

Other upgrades include the price plan, metering, and compatible outlets or provision for hard-wiring. If you are installing a DC charging is very fast; it uses about 400-volt direct current and is capable of reaching full charge in about 15 minutes. This is a complicated method and may require significant upgrades in the home electrical system. It is also very expensive and rarely used for home charging.

upgrade your wiring or install the product if you system capacity can support it.

It is essential to ensure that the electrical panel and dedicated circuit have the capacity to handle the system. The installation of the charging station is similar to other high power equipment, such as clothes dryer, and should comply with all the electrical codes and requirements.

Each charging station should be on its own dedicated circuit with adequate capacity and protection. However, the it can still be connected to an existing 40 Amp circuit, such as the one for the kitchen, provided that there is a locking mechanism to ensure that only one load is connected at a time.

Charge stations may be hardwired or plug-equipped to connect to the electrical outlet. For the plug type charger, you will need to have an electrician to wire the compatible electrical receptacle according to the codes.

You may add ventilation to improve the cooling of the charge station if it is in a location with poor air circulation.

Charging electric cars at home is the desire of the majority of EV owners. It cuts down on the cost and time to drive and wait at a public charge station. In addition, it does not interfere with the daily activities of the electric car owners since they can charge at night.

Unfortunately, there are several homes without the provision or capacity to support the charging stations. However, the EV owners can consult the car dealers, and then engage qualified electricians in upgrading the existing electrical wiring. This will enable them to conveniently charge at home.

There are few things more chilling than a home burglary. Imagine a stranger rifling through and stealing your possessions – to say nothing of the danger if you or your family members are home at the time of the break-in. Fortunately, you can take steps to deter potential thieves by using outdoor lighting to increase the visibility around your home. Today's inexpensive LED and smart technologies mean that you can create a system that is attractive, efficient and responsive without breaking the bank. Protect your home and your family with some of these outdoor lighting ideas.

A Light in the Darkness

Your outdoor lighting system should include lights near any doors and windows where a person could enter the house. "The biggest thing for any person who can burglarize a home is the ability to secrete movements," a Chicago Police Department spokesperson told the Chicago tribune. "This means darkness.”

Many outdoor lighting systems are easy to install on your own, although a few may require the help of an electrician for new wiring. LED bulbs are an attractive option because they use only about a quarter of the energy of incandescent bulbs and last up to 25 times as long. Some outdoor lights come equipped with a built-in security camera that will not only light up to scare off any would-be burglars, but also capture their image so you can notify police of the suspicious activity.

Stand-alone solar panel lights are a good option for walkways, although they shouldn't be relied on as a home security measure since variations in weather mean they might not always provide enough light to deter a prowler.

Getting Smart About Your Lighting

Smart lighting systems let you control your entire home’s lighting setup from your smartphone, even when you're away from the house. You can adjust timers, motion sensors, dimming functions or manually instruct the lights to come on or off. Certain smart lighting and security systems will automatically alert you when someone is at the door and allow you to talk to them through your phone no matter where you are in the world.

With smart technology, you can also add an extra layer of deterrence by having indoor lights come on for a period of time when you are away, giving the appearance that somebody is home. If you already have a lighting system in place, you can upgrade it to a smart system by swapping in some wireless smart switches and installing a control hub.

A Safer and More Attractive Residence

Lighting up your outdoor space is more than just a way to deter burglars. It can also make your yard look more attractive at night and help visitors safely navigate their way to your door.

If you need help planning or installing an outdoor security lighting scheme, contact your local electrician right away.