You have heard all about the benefits of a ceiling fan. They save money on your monthly electric bill throughout the year. During the winter, the warm air is stirred around the room instead of sitting near the ceiling. In the summer, the fan keeps the air moving and creates a cool breeze. Now that you are ready to take the plunge and buy your own ceiling fan, you are going to need an electrician in Pasadena to help you. Fortunately, you can count on The Electric Connection to get the job done for you in a professional, timely manner.

When you head to the home improvement store, you need to be prepared to sort through upwards of a hundred different fans in varying sizes, colors and designs. First of all, you will want to narrow the fans down by the size of the room the fan will be hung in. Fans will be labeled with the appropriate room size. Small bedroom fans will have short blades, while larger fans designed for the living room will have longer blades.

The height of your ceiling will also influence the fan you buy. If you have cathedral ceilings, a simple fan pull will not work. You will want a fan that includes a remote or that has the capability to have a remote adapted to it. You will also need to determine if you want lights with your fan. It is a very common accessory for ceiling fans. In fact, fans are often placed in position where the light would be located in the room. Lastly, and probably the easiest decision, is choosing the color of your fan. There are plenty of colors and wood stains available.

Once you have your ceiling fan picked out, call an electrician familiar with Pasadena electrical codes to have it installed. Give The Electric Connection a call today and start enjoying your ceiling fan this summer.

One of the questions we’re frequently asked is, “How do I know if I have to replace a light switch in Fairfax, VA?” And that’s a very good question, because most of us don’t think twice about flipping a switch on or off. However, it’s critical that you make sure your light switches are in good working order, because not doing so is likely to end in injury, especially because flipping a switch is an automatic action.

Just think about it: you come home in the dark, and the first thing you do is switch on the light. Or if you wake up in the middle of the night and need to go to the bathroom. That’s three light switches you have to navigate while being barely awake (the one in your bedroom; in the hallway; and in the bathroom). Same thing if you enter your garage on a winter morning: you’re focused on getting in your car and getting to work safely—not on the possibility of getting an electric shock from a faulty light switch.

Signs You Need to Replace a Light Switch in Fairfax, VA

So how can you tell if your light switch needs replacing? Pay attention to the following signs:

If you notice any of these signs, it’s time to call us! The sooner you call, the better, because a faulty light switch can cause electrical shocks (which can in the worst case be fatal!) and electrical fires that can destroy your home and injure your family or worse—cost them their lives. So be responsible, and call Beacon right away!

LED sign lighting provides years of illumination and low energy costs. sign modules that consume 50mA of power each. Required materials differ depending on sign size, module size, length of wire between modules, current draw, and lumen output.

Materials:

1. First, measure your sign. Although we recommend spacing module rows 3 inches apart, it’s ultimately up to you. If you want a brighter sign, place them closer together and vice versa for a dimmer sign. With the recommended 3-inch spacing, a 4-foot square sign would need 150 modules (15 rows of 10). Again, the quantity of modules needed  is based on many factors and can differ.

These LED sign modules are available in custom lengths of up to 20 modules per strand. Order 60 feet (4 feet x 15 rows) of stranded modules, and cut the strand after every 10 modules. Each strand can be cut to make two rows.

2. Next you’ll need to order a power supply that’s rated for the combined wattage of all sign modules. To ensure that you don’t overwork the power supply, confirm that the total wattage of your modules is at least 20 percent less than the power supply’s rated wattage.

An easy way to calculate this is to multiply the total wattage of your combined lighting by 1.2. In the 4-foot sign diagram, there are 150 modules with a current draw of 50 milliamps (mA) each. Since current draw is given in milliamps, multiply that number by voltage and move the decimal 3 places to the left to get wattage. This module consumes 50 mA and has 12 VDC operation, so it consumes 0.6 watts (50 x 12 = 600). Next, multiply 0.6 by 150 to get a combined wattage of 90 and multiply that number by 1.2 (90 x 1.2 = 108) to determine which power supply you’ll need. Since the result was 108, you will need at least a 120-watt power supply.

3. Next on the list is wire to connect all your sign module stands to the power supply. For a 4-foot sign, you’ll need 4 feet of 18-gauge two-conductor wire to serve as your main line plus enough to cover the distance between your power supply and where it will be wired into an electrical system. You’ll also need dual-channel T-tap wire splice connectors for an easy connection to your main line.

Before you begin working on your sign, turn off power to the area.

4. If there isn’t one already, drill a hole in the back of your sign as an exit point for your wire.

5. Use a tape measure or ruler to plot your row spacing. Leave space on one side of the sign for your module-to-main-line connections. Mount the sign modules using their double-sided adhesive and/or screw holes.

6. Insert the end wires of each sign module row into the T-tap splice connector, and clamp the other end of the connector onto the main line. The splice connectors eliminate the need to strip wire insulation.

7. Use double-sided foam tape to secure each T-tap splice connector to the inside of your sign.

8. Reattach your sign’s front cover.

9. Connect the main line to your power supply, wire the supply into your electrical system, and restore power to the area.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.