The start of the new school year for kids means cooler weather is just around the corner! The Farmer’s Almanac is predicting another wicked cold winter, with our area getting cold, wet, and white…yikes!

Since winter is often the time when energy bills are the highest, we thought we’d share a few of our favorite energy saving tips to help keep you comfortable without breaking the bank this season. Keeping your electrical system safe is important, especially when snowstorms threaten to knock out power (and with it, heat!), so read up and remember: for all your electrical service needs in Maryland, Virginia, and Washington, DC, call Kolb Electric!

If you use a heat pump to heat and cool your home, you probably already know that they’re among the most efficient HVAC systems you can install—if you use them correctly.

During the winter, set your thermostat to the lowest setting you’re comfortable with and keep it there for the whole season—the U.S. Department of Energy (DOE) recommends 68 F, but ultimately this is up to you. Every degree you set the thermostat lower will lower your energy use, so if you like to bundle up, this is a great way to save!

Most heat pumps come with a backup heating system to give you a little extra heat if the pump itself can’t make it. Unfortunately, electrical resistance heat is very inefficient and can get expensive if you use it too often. This electrical backup kicks on when you turn your thermostat up, which is why it’s best to set your thermostat once during the winter and then leave it there.

The one time when you should adjust your thermostat is when you’re leaving the house for a few days—the backup heat will kick on when you come back and set it back up, but the amount you save from being gone should offset that.

With any other form of heat, you’re free to adjust the thermostat as needed throughout the day. Again the DOE recommends 68 F as a balance between comfort and efficiency, but you may want to set the thermostat lower during the day when you’re not home and higher when you are home (a programmable thermostat makes this easy!).

If you’re going to be away and want to set the thermostat down, don’t go lower than 55 F. If your home gets too cold, your pipes could freeze and create a very messy situation for you when you return!

Whatever type of heating system you use, make sure you keep your filters fresh all season. Change them about once a month during times of peak heating system use. Just keeping on top of this can save you as much as 10 – 15 percent on your monthly energy bills!

Your water heater is usually the second largest energy consumer in your home, next to your heating system. Saving money on your water heating is not too complicated:

Fix all leaks when they happen! Even what looks like a small leak can waste hundreds of gallons of water per month—all of which you still have to pay for.

Take showers instead of baths. A normal shower uses about half the water of a bath, which also means less water heater needs, lower sewer costs, etc.

Use a flow restrictor to maintain water pressure while minimizing the amount of water use.

Don’t let the hot water run when doing dishes, shaving, or brushing teeth.

Like a heat pump’s backup heater, a space heater uses electrical resistance heat that can be expensive to operate. That said, they can be useful to heat small areas like the bathroom for short periods of time. In fact, it can be much cheaper to use a space heater in the morning than to raise the temperature in the whole house for a short period of time.

hazardous location lighting.

The National Fire Protection Association (NFPA), National Electric Code (NEC) 70, defines hazardous locations through a system of classes, divisions or zones, and groups that products must be labeled as to be used in those areas. Hazardous area classifications are based on the general type of substance or material that is present in the area, the likelihood that it exists, and more detailed specifics, such as ignition temperatures and combustible properties.

Class I:

A Class I hazardous location contains flammable gas, liquid-produced vapors, or combustible liquid-produced vapors that can be present in quantities large enough to create an explosion.

Typical locations include airplane hangars, vehicle paint shops, commercial laundromats, and gas plants.

Class III:

This type of location contains easily ignitable fibers or flyings in the air but that aren’t likely to be in suspension in amounts large enough to cause an explosion.

Typical locations include textile mills, cotton mills, and sawmill facilities.

explosion-proof LED lights that are safe for use in a variety of hazardous locations. Click each photo to see details, including a complete list of classifications and certifications.

If you have any questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

The relationship between weather and energy usage is a never-ending cycle. Spikes and drops in temperature and humidity lead to spikes and drops in energy use (and costs), which in turn correspond with spikes and drops in greenhouse gas emissions, further affecting climate. What does this relationship mean when it comes to your energy usage?

Temperatures above 100 and below 40 stress your heating and cooling system, pushing it to capacity, reducing efficiency, and draining energy supplies, along with your wallet. Quite simply, this amounts to less bang for your buck in terms of comfort. Add to temperature issues, wind, cloud cover, and precipitation and the snowball effect continues, further impacting comfort levels, not to mention your ability to illuminate interior spaces. Compound the issues – and the population affected – and you’ve got grid strain to boot.

That depends on the source of energy. In the US, 83 percent of energy usage comes from fossil fuels, which release gases such as CO2 into the environment during the creation of energy. Unfortunately, these gases trap heat in the atmosphere. Atmospheric greenhouse gases have increased 30 percent since the pre-Industrial Revolution era alone, and the level continues to rise with energy demand. As levels increase, so does the effect on the environment. Thousands of scientists agree the trapped gases are currently affecting the climate, and will increasingly weigh on it as time goes on. This has resulted in an increase in interest in cleaner forms of energy, including nuclear, solar, wind, and geothermal.

Ready.gov recommends that you keep an emergency kit in your car with a few essentials:

When branches become heavy with ice and fall on power lines, many are left without electricity and need to find alternate sources for keeping their home warm and safe.

If you live in the South, you know this: if it snows, you can pretty much count on school being cancelled. By about day three of last week’s #snowcation, videos started popping up in my news feed of kids dancing on kitchen tables and singing their 800th rendition of “Let It Go” while frazzled parents held onto their sanity. What’s a parent to do? The web is full of great ideas that creative parents have come up with, but here are a few of my favorites:

Growing up in North Carolina, the novelty of a real winter snowfall still catches me by surprise. By being as prepared as I can, I’m able to spend time enjoying the magic of winter with my family. How do you prepare for a winter storm? Do you have any creative ideas for keeping home-bound kiddos entertained?