Halloween is less than one month away! If you’re thinking of decorating your home for the holiday, nothing can help turn your house into a festive sight like lighting. In minutes, you can turn your quaint cottage a ghoulish green, make your bungalow glow orange, or paint your front lawn an eerie yellow. Suddenly, your charming home becomes mysterious and thrilling to trick-or-treaters and passersby.

If you have been thinking about a kitchen remodel and are finally ready to take the plunge, you will need to find an electrician in Pasadena. Construction is something that should be left to the professionals as well as the electrical wiring that will need to be completed. Even if you are doing a light remodel and doing the work yourself, the electrical work will still have to be completed by a certified professional. If you are not familiar with electricity, you should never attempt to handle it. It is simply not worth the risk. You can rely on The Electric Connection to provide an electrician who has the experience and knowledge you need.

During a kitchen remodel, you will likely want to have any wiring upgraded to make sure it is up to the latest codes. This will include installing GCFI outlets that are safer for use in the kitchen. Along with the outlet upgrade, you can add additional outlets that seem to always be in short supply in the kitchen. One of the best parts of remodeling your kitchen is having a say in what will work best for you and your electrical needs.

A remodel will typically include new light fixtures as well. This is the really exciting part. If you haven’t seen a brand new kitchen in a while, you will be amazed at the various lighting that is available. There are some gorgeous track lighting fixtures that will fulfill your Pasadena electrical needs. Another handy feature is the under-the-counter lights that are quickly becoming very popular. Some use LEDs, which are energy efficient and shed plenty of light on the spaces that tend to be shielded from the standard ceiling lights.

If you are ready to schedule your kitchen remodel, give The Electric Connection a call today to set up an appointment.

Snap! Crackle! Pop! These are great sounds if you’re crunching cereal or curling up in front of a roaring fireplace on a cool winter evening. However, they are definitely unwelcome if you have just flipped on an electric light switch in your Los Angeles home. While most people can do simple home repairs, electrical problems are much more difficult — and potentially dangerous. At times like this, you’ll need to call on a Los Angeles electrician.

Since 1979 the Electric Connection has been providing electrical service and electrical repairs locally as an electrician in Los Angeles and the surrounding communities. But they offer an additional, very unique electrical service; they are willing to answer your electrical questions and give free electrical advice to homeowners who have questions about their home lighting, electrical rewiring, electrical safety assessments, electrical upgrades, or any other electrical concern. In a way it’s like having your own personal electrician in Los Angeles who will share bits of wisdom and electrical trade advice without charging for an unnecessary electrical service call.

Here’s an example of the kind of electrical help that’s available on The Electric Connection’s website. Suppose a short circuit causes your circuit breaker to flip off. Do you have an electrical wiring issue? Is the circuit breaker overloaded? Is the breaker broken? This Los Angeles electrician’s site walks you through some steps you can take to isolate the problem at no fee. They suggest you think back to what happened immediately before the electrical power went out. For example, if you just plugged in an iron or other appliance immediately prior to the circuit breaker jumping off, unplug the appliance and reset the circuit breaker. If it stays on without any additional electrical power interruptions, the problem is most likely a faulty appliance and not an electrical issue at all.

On the other hand, if the circuit breaker does not work normally, or if you can’t find any specific cause for the break in your electrical power, then it may be time to call a licensed electrician in Los Angeles CA. Everything wears out over time, even circuit breakers, and you may simply need to have yours replaced. Another possibility is that the electrical wiring in your house is not sufficient for the amount of electrical appliances you now have. This situation frequently occurs in older homes which were built before the age of multiple televisions, home computers, entertainment centers, trash compactors and more. In this situation a Los Angeles electrician can add additional electrical wiring to your home or upgrade your electrical panel, bringing it up to speed with today’s highly powered lifestyle.

The Electric Connection’s website is full of other little hints that can help the do-it-yourself homeowner. For example, do you want to change out that old dining room light fixture with a more romantic chandelier that is hooked up to a nice dimmer switch? If so, read the advice on the Electric Connection site to make certain you purchase the correct electrical switch. Do you have flickering lights or electrical outlets that fail to work? The Electric Connection, your Los Angeles electrician, will tell you all of the possible reasons for your problem.

They are also willing to explain things such as the recent electrical upgrades to the National Electric Code that requires special outlets called ground fault circuit interrupters (GFIs) to be installed in electrical outlets which are near water sources, like the bath, kitchen, garage, pool or hot tub. These inexpensive electrical upgrades can be a lifesaver – literally!

Things wear out, including electrical wiring, and codes continually change as improved materials and safety features become available. Do you know the state of our home’s electrical health? If not, you may want to contact a licensed electrician in Los Angeles CA to conduct a free, no-obligation safety check. Your home is not only one of your largest financial investments, but it’s the place of safety you provide your family. Take a little time to give your home a checkup.

When you’re looking on line for electrician Los Angeles, you’ll you can always call The Electric Connection to discuss your electrical projects, to ask any electrical related questions, or to inquire about an electrical estimate.

Ah, yes, the kitchen—the hub for social interaction, a space for culinary inspiration, and if you’re not careful, a prime spot for electrical problems. Truth to be told, kitchen lighting in Fairfax, VA is more important than you realize. You’re probably used to passing through your kitchen so many times on a daily basis that you don’t really take the lighting into consideration. But if by chance that you do notice it, you may looked around and said, “Wow, this lighting really needs to get in with the times.”

We all know or at least heard that converting from Metal Halide (High Intensity Discharge) to LED will save you money.

But how much? Are there any other reasons or difference you should know about?

In this article, we break down all the factors that you should be aware of before making a decision to convert from Metal Halide to LED. Here are the 9 reasons we think LED wins over Metal Halide.

Let’s take a look at the information on a typical 400 watt metal halide bulb. While specifications may vary, a visit to a popular online website that sells Metal Halide bulbs shows that a brand new bulb has the following specifications:

We have just as many customers wanting to convert to LED because of maintenance savings as they do for energy savings. Think about what we discussed, over the life of the LED retrofit kit, a customer would have to do 5-6 Metal Halide replacements. The higher the installation height, the higher the cost of replacement. And if you have a facility loaded with lights, this becomes a significant budget amount every year that you must take into consideration. Now, we know that reduced maintenance time on lights does not translate into dollars saved because it is highly unlikely that people will lose their jobs over the fact there is much less work to do. However, these people will have time to now work on things that matter, like fixing the machines that make the company money instead on replacing lights that cost the company money.

When you take a measurement of light with a light meter, it reads lumens. And this measurement of all the lights that contribute to the light at that location creates a measurement called foot candles. But let’s think about that light that is being measured. Metal Halide creates all sorts of light, in all spectrum’s, visible or otherwise. This includes UV and IR spectrum’s, visible to the measuring device but not visible to the human eye. LED, on the other hand, does not produce UV and IR. Therefore, its readings using the same light meter is only picking up visible spectrum’s.

So there is a fun little test you can do. Have 2 light sources, LED and Metal Halide. And first ask, which one is brighter? And if the right LED source was selected, they should say LED. And then use a light meter, and the light meter may say the Metal Halide area is producing more foot candles. And so now you know part of the reason, but wait, there’s 2 other pieces of information you need to know.

Click here to see our infographic on Retrofitting vs Replacing.

Conclusion