Although Christmas is now behind us, we are still deep in the midst of winter. The ground is frosty early in the morning, and the temperature throughout the day can easily fall below zero. When traversing through your daily routine this winter, be prepared for the worse and stop accidents in the home before they happen. Here are some winter electrical safety tips that could prevent serious injury and harm:

Keep away from downed power lines – A few weeks ago we discussed power line safety. This is a hot topic during the winter because roads are slippery and car accidents increase. If a car hits a power line and the electrical wiring falls down, keep at least three metres or 10 feet away. Power lines are very powerful and can cause serious electrocution if you are not careful. Keep your family and children educated, as they could come across a downed power line during their daily commute. Always call 911 when you see a power line down.

Place your space heater at a safe distance – Space heaters are a great way to keep specific rooms warm without ramping up monthly heating bills. Because of the high heat output of electrical heaters, it is important to keep them away from flammable material.  Ensure that they are not in contact with any furniture, rugs, and curtains. If you feel surrounding objects becoming hot, move the heater. Fires are easily started if the heater is unattended. Always turn off the heater when it’s not in use.

Ensure your backup generator is ready to go – As we said, dangerous road conditions can cause damage to power lines and in turn results in power outages. For those homes and businesses equipped with standby generators, it is a good time to have regular maintenance and check-ups done. Have a professional inspect the power generator to ensure that oil levels and gas levels are correct, and the connection to the home is safe and secure. If a power outage occurs, you want to be confident that it will power your home/business when it needs to.

Avoid using candles during power outages – Many people use candles to light their rooms during power outages. While this can deliver a nice ambience, it is very dangerous. If the candles are unattended or wax drips and causes build up around the candle, it can result in a fire. Instead, use flashlights or LED candles.

Unplug major appliances during power outages – During an extended power outage, unplug your major appliances (oven, fridge, freezer, television) and turn off light fixtures (You can leave on some lights so you know when the power returns). This can prevent power surges from occurring and damaging the appliances when power returns.

Prepare an emergency safety kit for long outages – To be prepared for extended power outages or even in the event of a serious natural disaster, have an emergency kit ready. The emergency kit should be readily accessible and contain batteries, flashlight, blankets/sleeping bags/warm clothes, non-perishable food, a first aid kit, and sufficient water for your family. This will keep your family warm, fed, and safe during an emergency. Check with your local safety authorities and put together a safety kit.

The winter can bring harsh weather conditions that affect our daily lives. With the proper precautions you can be prepared for the worst situations. If you have questions about your home electrical system during the winter or power generators, contact your local Expert Electric at 604-681-8338.

In most offices, hallways, and other lower level and flat ceiling environments you will find some sort of tube lighting in place. The most common technology that is found to be used is currently fluorescent, but after this post that might slowly change for some because this alternatives to fluorescent office lighting and all of those other uses listed above is going to change your mind on which technology is the truly efficient one.

Although it is completely harmless while in the tube itself, accidents always happen. When a fluorescent tube is broken, a LED fluorescent tube alternative, you will skip this issue entirely because LED technology does not require any sort of mercury to work!

While LED technology is pretty much good to go in a greater range of temperatures, fluorescent lamps only works at it’s peak performance when it is in room temperature type environments. So LED technology is much more flexible in which temperatures it can operate properly at, fluorescents are only suitable for inside only applications. But even then, LED still wins for all of these other reasons listed on this post! And a thing to remember is that fluorescent technology isn’t better than LED is indoors, it’s just that it only works optimally at room temperatures. But when you replace fluorescent light with LED, you still get all the benefits that LED brings and they aren’t picky about the temperature at all.

When you hear the words non-directional, what exactly does that mean to you? Well, in the world of lighting it basically means that such fixture emits lights 360 degrees (or in all directions). This causes 30-40% of all the light being emitted by a fluorescent tube to be wasted due to the trait it carries of non-directional emission of light. With LED, it has directional lighting which allows you to direct the light where it needs to go and isn’t going to waste being emitted 360 degrees.

Let alone all of the other benefits that a a return on investment when you start looking at what contact us with any questions you have!

Lighting has come a long way in the last several decades. We are no longer forced to endure the same, boring light fixtures and bulbs. There are plenty of new designs that provide more light while using energy efficient bulbs. In fact, the lights are so much brighter than the old-fashioned incandescent bulbs, it can be a little too much for some situations. Bright light is great at times, but other times you don’t need to see every inch in the room and just need a soft light to allow you to watch television, eat a meal or relax while surfing the net on your laptop. This is a downside to the CFLs and LEDs that are trending in the lighting world. An electrician in Los Angeles has a solution for your lighting needs. The team at The Electric Connection can help explain it a little better.

Now, you probably remember the dimmer switches that were very standard in construction throughout the 70s and into the early 2000s. Those switches lost some popularity as the CFL bulbs gained in popularity. CFLs are not meant to be used with a dimmer switch in most cases. Keep in mind, there are some that are specifically labeled as dimmer switch capable. This meant people were stuck with the bright light or no light at all, explains an electrician. Los Angeles homeowners can upgrade their old lighting fixtures to those that use LEDs and take advantage of the cost savings and flexibility of dimmer switches once again.

Dimmer switches are an excellent way to save money on your lighting bill says a Los Angeles electrician. Combined with energy efficient LEDs or CFLs and you can make a dramatic difference on your electric bill each month. It is important you only buy bulbs that are specified for use with a dimmer. Your electrician can explain more about the risks of using non-approved lights in the fixtures attached to a dimmer. Give The Electric Connection a call today and schedule your dimmer switch installation and take back control of your lighting.

One of the easiest ways to increase your home’s security and beauty is to install outdoor lighting. By combining beautiful outdoor lights with your home’s landscaping, you can increase the value of your home while creating a gorgeous outdoor area that you can enjoy at any time of the day. But what outdoor lights are the best? Let the electrical experts at Kolb Electric help.

Like everything, it depends on what you’re looking for with your outdoor lighting. Do you want security for your home, or landscaping? These questions will point you toward not only what style lights you need, but how bright your lights should be.

When you choose to use outdoor lighting for security, you can go in two different directions. You can either:

If you’re choosing to install outdoor lighting for landscaping purposes, it’s important to keep these few things in mind:

Kolb Electric offers outdoor lighting that will increase your home’s:

Beauty – landscape lighting can be used to showcase interesting features in your home’s architecture or your yard! At Kolb Electric, we can design and install outdoor lighting that will illuminate and call attention to your landscape at night. Landscape lighting is a fully customizable way to improve the look of your house after the sun goes down, particularly if you enjoy entertaining or you want to improve your home’s curb appeal.

Security – dark spots in and around your yard can be dangerous, particularly if they are around entry points into your home. With low-voltage landscape lighting, you can shine a light on potential problem areas in your home and deter intruders late at night!

Safety – in addition to keeping your home safe from intruders, low-voltage outdoor lighting can make walking around your yard safer. It can be used to light up stairways, paths, etc. to prevent tripping and injuries.

One of the most popular tools in any home is the extension cord.  For a long time, rooms would be built with only one or two outlets, creating the need for additional power strips and extension cords as we moved into a more digital world.  As more devices found their way into our homes, the NEC updated standards for home construction to require additional outlets and electrical accessibility in each room.  Unfortunately, most homes still lack the proper number of outlets, and when a cable can’t reach, most of us will reach for an extension cord.

Most of the time, this isn’t a problem.  Extension cords function exactly as their designed to.  When you need a longer cord to place a fan or give a little extra reach to your vacuum cleaner, there’s nothing dangerous going on.  Where extension cords become risky is in their overuse.  Many people buy the longest, cheapest cord they can find and this is where danger sets in.

Electricity and metal have a very interesting relationship.  As current, the flow of electricity over a conductor, increases in a wire, the temperature increases.  Current is also adjusted as resistance increases to keep power at the same level.  When you add wiring to a circuit, the resistance of the wire itself stacks with the rest of the components on that circuit.  While one electrical cord doesn’t add much in the way of resistance, multiple cords will continue to increase the amount of power being used in the system.  As the current increases to keep up with the new demand, the temperature in the wiring also increases.

This relationship is used to great effect in your circuit breaker, where the difference in heat forces a breaker trip that protects your system.  In an extension cord that isn’t designed to handle the load being placed on it, insulation melts and fires can start.

Keep in mind that extension cords are always temporary.  Never use an extension cord for anything permanent.  They are designed to help you reach electricity for a task and nothing more.  When in doubt (or if you hear buzzing coming from the wiring, socket, or circuit breaker) switch to a higher amperage circuit and a lower gage wire for your extension cord (the lower the gage, the thicker the wire and the more current it will be able to handle).

According to the Electrical Safety Foundation International, Guidelines for using an extension cord are as follows:

Remember that the more power you need, the more current you’ll be using.  Any device that includes a motor or heating element will either need an industrial-grade extension cord (power tools) or should not be used with an extension cord at all.

For the best in quality electrical repair work and installations, contact the professionals at Custom Electric!  Be sure to check back here each week for helpful advice, news, and guides or follow us on Facebook and Twitter!

Categories: Local Electrician, Residential« What is a Circuit Panel?  |  Step Up Your Green Game This Year »