It’s no secret that incandescent lights are on their way out—they’re incredibly wasteful, have relatively short lifespans, and are much better at producing heat than light. This leaves us with two alternatives: LED and CFL bulbs. And while CFL bulbs have been steadily gaining traction in many homes in our area over the last several years, some experts see them as little more than a stopgap measure before LED lights become more commercially viable. So what’s the real story? Should you go out and buy up all the CFL bulbs before they’re phased out or should you hold out for LEDs?

The US Department of Energy put together an extremely thorough, 50-page analysis comparing LED and CFL bulbs, which we definitely recommend checking out if you’re interested. In our comparison, we’ll be looking at the following aspects of CFL and LED bulbs:

Note: unless otherwise noted, our comparisons are based on using 30 bulbs simultaneously. So without further ado, let’s take a look at what distinguishes CFL and LED bulbs and which you should install in your home:

Thanks to DesignRecycleInc.com for the information in this chart!

Based on the chart, the clear winner seems to be LED bulbs. And it gets even better—Phillips is expected to release a new LED bulb that gets 200 lumens/watt, more than twice as good as the best LED on the market today. If that bulb performs as expected, it could allow LEDs to declare a decisive victory over other options.

If you’re interested in learning more about the benefits of LED lights, don’t wait—call Kolb Electric today!

It’s exciting to deck out the front yard, the house and of course all over inside the home with pretty holiday decorations. Bright lights and big, extravagant moving decorations are something many homeowners take pride in. For some, it is a bigger is better. There is certainly some friendly competition between neighbors, which can be great for visitors who love to see the grandeur. However, there can be some safety concerns when that must electricity is being used. One of the most important things to remember this season is electrical safety. Your electrician in Beverly Hills wants you to be safe this season. The team at The Electric Connection can help make your holiday decorating easier and safer.

Extension cords can help connect those lights and big decorations, but you want to be sure you use the right cord for the job. Outdoor electrical cords are specifically designed to withstand the elements. Never use flat cords that are only to be used outside to try and plug in lights outside. Stick with the big, heavy round cords that are typically 3-prong.

Never connect more than 2 cords together. Ideally, you will only want one cord connected to a light socket. If you find your cord is simply not long enough, call an electrician. Beverly Hills homeowners can have additional outlets installed in the outer edges of their yard and landscaping, which makes decorating a breeze and can prevent having to use an extension cord altogether.

Never connect more than three light strands together. This could overload the circuit. LED strands are a little more forgiving because they take very little energy to run. Again, call your Beverly Hills electrician to install more outlets if needed. It is cost effective and makes decorating a breeze. Give The Electric Connection a call today if you have questions or want those additional outlets before it is time to deck the halls.

LED foyer fixture from Artcraft

Saving on energy costs and outfitting your home or office environment with new lamps and light fixtures should be at the top of your home improvement project list.  Not only do new light sources deliver a superb quality of light, they are the key components in decorative and energy-efficient lighting design.

It is an exciting time in the lighting industry.  New products are being developed every day, and LED (light emitting diode) and SSL (solid-state lighting)*  lamps and light fixtures are at the core of future illumination.

What’s more, the integration of LEDs into building and electronic communication systems is bringing everything together and enabling total control with the ease of a smart phone!

Here are some guidelines to help you answer those questions and invest wisely toward one of the greatest home improvement projects of the decade:

WHAT YOUR LIGHTING DESIGN CAN AND SHOULD DO FOR YOU…

In addition to providing optimum levels of brightness, good lighting design must also…

•Eliminate glare

•Increase comfort

•Provide continuity

•Deliver good color rendering

•Allow for adjustability

•Instantaneously make you ”feel good” with an inviting luminous appeal

Because LED lamps require so little energy to provide a great deal of illumination, the energy consumed by the bulb will not be your main concern; your main concern will be getting the desired level of brightness and light appearance.

*NOTE:  LEDs, also referred to as SSL, provide the most energy-efficient and durable illumination because they are composed of “solid state” semiconductor light emitting diodes.

1.    Familiarize yourself with labels on new bulb cartons.

Brightness (in lumens)

Estimated Yearly Cost (depends on rates and use, $)

Lamp Life (based on 3 hrs/day use, rated in years)

Light Appearance (CCT)  (warm-cool, rated in degrees Kelvin (K))

Energy Used (in watts)

Color Rendering (CRI) (measured on a scale of 0-100)

BRIGHTNESS

Brightness levels are measured in lumens to give the amount of total light created by the light source.  Beyond the lumen count, “useable” light and brightness levels are also affected by fixture housings, lenses, filters and shades.  There are clear standards set to measure the lumen output of each LED chip.  ↓

LIGHT APPEARANCE  

Light appearance or correlated color temperature (CCT) helps determine the quality of illumination.  Designated on the Kelvin (K) scale, CCT for decorative interior spaces should be in the warm white (2700-3000K) range.  Sometimes lighting in the neutral white (3500-4000K) is preferred for certain areas, such as bathrooms and kitchens.

LAMP LIFE AND THE LED

Lamp life refers to how long a light source will last once it is installed and used on a daily basis in a typical application. Lamp life ratings, based on estimates from testing,  convey the time that half the bulbs in a sampling have burnt out or dimmed below fifty percent.

COLOR RENDERING AND THE LED

The color rendering index (CRI) measures the ability of a light source to bring out the true colors in décor, objects and surfaces.  Based on a scale of zero (no color rendering) to 100 (perfect color rendering),  a minimum of 80 CRI is acceptable for interior lighting applications.  A CRI of 90+ is even better.

However, because the standard CRI measurement does not always yield true results for some LED light sources, a new standard measure of color quality is in the works:  The Color Quality Scale (CQS) may soon replace CRI for a truer account of color rendering provided by the LED light source.-www.ledlightingexplained.com, Philips Solid-State Lighting, 2010

2.    Match light fixture to light source to ensure peak performance.

LEDs small size, low-temperature emissions, and focused uni-directional beam patterns make them perfect light sources for undercabinet lighting, track lighting and pendant fixtures.

LED general and flood lighting replacement bulbs are composed of clusters of diodes to provide broader beams of light.  General service LED bulbs that are multi-directional with 360-degree angle capacity are doing an excellent job of replicating the desired illumination of old incandescent bulbs. These LED  lamps include A19, PAR, BR and candelabra light sources that are providing more light with the added benefit of tremendous energy-saving, maintenance-free illumination.

Due to their long life and durability, LEDs are excellent in hard to reach places like foyer, attic and cathedral ceiling fixtures.

*Check for compatibility with all new light sources to make sure lamps, light fixtures, dimmers and automated controls are a suitable match.

3.    Compare “apples to apples”; diodes to diodes to ensure top quality.

 Many factors contribute to the quality of the LED light bulb.   Advancements in diode technology and mass production of LED light sources are bringing costs down to make these bulbs more affordable.  However, be wary of “cheaper” LED light sources.

•COB (chip on board), the diode itself is composed of a chip that largely determines  the quality of the bulb.

Prior to being marketed in appliances, fixtures or light bulbs, LEDs are sorted into bins according to their light output (lumen output) and color temperature.  Due to the process of “binning,” LED chips vary in their quality—especially in relation to their lumen output and color, so it is important to purchase LED light bulbs and LED light fixtures from a reputable dealer.

LEDs chosen from bins with higher lumen output are of better quality.  Color temperature is determined by matching up each LED according to a chromatic line grid for a specific color temperature.   LEDs chosen from larger bins contain more color variation , so they deliver an inferior quality of light.

•LPW (lumen per watt), this measurement helps to determine energy-efficiency and efficacy

•IC (integrated circuit) drivers, the quality of the LED lamp is also dependent on the type of driver installed.  LED bulbs contain “drivers” that can fail just like the ballast of a CFL (compact fluorescent). Better driver components make for a higher quality LED light source.

ENERGY STAR-ratings ensure that the LED has met stringent testing procedures.  ENERGY STAR-rated lamps clearly identify characteristics on LED light sources to guarantee that they consistently and reliably meet the desired brightness (lumens), energy-efficiency (lumens per watt), color temperature (CCT), color rendering (CRI), and dimmability requirements.

New ENERGY STAR Regulations include:

•Consistency Control:  More standardized testing methods to improve consistency.

•Dimmability Ratings:  A lamp is either dimmable or not dimmable.  If a lamp claims to be dimmable, testing is required and it must dim down to at least 20 percent.  If it is not dimmable, it must say so on the package.

•Greater Energy Conservation:  Efficiency requirements have increased for specific lamp wattages and types.

NOTE:  The Environmental Protection Agency (EPA), along with ENERGY STAR offers rebate programs as an added incentive to help you spring into action and upgrade with LED.  Check out rebate programs in your area or contact an American Lighting Association (ALA)-affiliated showroom for more details.

LED chandelier “Niagara” from Lladro

1800lighting’s Top LED Bulb Pics:

Bulbrite’s  LED  MR16 lamp

Philips medium base LED

Philips dimmable LED

Satco’s PAR38 indoor-outdoor LED lamp

Satco’s Kolour One A19 omni-directional LED lamp delivers 820 lumens and excellent color consistency.

Satco’s Ditto PAR LED lamps are available in 25- and 40-degree beam angles and either 3000K or 4000K.

LED streetlights are great for the environment. They consume much less energy than standard high-intensity discharge (LED streetlights. What some cities have failed to consider, however, is that while LED streetlights are capable of emitting different colors of light, not every color should be used in public outdoor spaces. Bright blue-rich white light can cause some issues for residents, local wildlife, and night sky visibility. When it comes to streetlights, the warmer the color/correlated color temperature (

studies showing that it can even aid in IBS as well as migraine and cancer prevention.

Throughout the day, light changes from a warm white color at dawn to natural white then to a cool white in the afternoon, back to natural white, and eventually to an ultra warm white color at sunset. Our bodies are used to this cycle of light. Artificial lights that deviate from the natural lighting cycle can throw off our circadian rhythms. The National Institute of General Medical Sciences states that, “Circadian rhythms are physical, mental and behavioral changes that follow a roughly 24-hour cycle, responding primarily to light and darkness in an organism’s environment.”

According to healthybuildingscience.com “. . . different types of light trigger different physiological effects. Blue/white light, akin to a bright midday light, suppresses melatonin and increases serotonin, this light is great for activity. Conversely red/orange light triggers melatonin in preparation for going to sleep. If everything is in balance, the body will generate dopamine, serotonin, cortisol and melatonin in the right quantities at the right time of day.”

On their website, the IDA cites important information from a report, this happens “. . . because blue light scatters more within the human eye.”  While it’s not directly causing harm to someone’s health, glare decreases driver safety and can lead to traffic accidents.               

At night, blue light used outdoors can also wreak havoc on ecology. Introducing light with a CCT that’s close to daylight essentially changes the daily cycle that plants and animals are used to. They depend on this cycle of light and dark for hunting, reproduction, sleeping, migrating, and protection. Nocturnal animals have suffered greatly from cool white light at night; the IDA

Because blue light has a larger reach, cool white LED lights used outdoors at night can contribute to light pollution, or brightening of the sky. This decreases the visibility of stars and can have a negative effect on astronomical research. If cool white LED lights are used, they should be shielded or aimed directly downward to prevent light pollution.

Warm white LED street lights and parking lot lights—with a CCT of 3000K or less—are a much better option for public outdoor areas. They emit a much smaller portion of blue light—which is unnoticeable to the eye—and are currently the best options available for street lighting.

Click the photo below to see our line of warm white LED streetlights.

You may not think about it often, but the power coming into your home travels a long way before it gets to your refrigerator, air conditioner, or any of the other appliances in your home. On the way, electrical current encounters fluxuations and interference from things like other appliances, machinery, and low quality wiring. That “Dirty” power can cause inefficiency and disturbance in your appliances, making things like the motors in your refrigerator and air conditioner, the circuits in your television, and all of your other electrical gadgets work harder than they need to, and wear out faster than they should.

A Power Conditioner will take the electrical current coming into your home and “clean” it, using filters to isolate power outlets and remove interference. This provides the correct voltage level to sensitive electrical equipment, allowing it to work safely and efficiently at the correct voltage.

Because power conditioners help your appliances run more efficiently, they can also lower the overall cost of running these appliances, and extend their lifespan. For more information about home power conditioners or for help on any electrical project in your home, please reach out to www.electricmaninc.com