With Valentine’s Day edging past and Random Acts of Kindness Day coming up this February 17th, have you given any thought to how helpful your recent actions have been to your bottom line?

Lighting accounts for approximately 5-10 percent of total energy use. Simply turning off the lights in unoccupied rooms can save a great deal. Multiply that savings times thousands of households, and you’re taking part in a huge random act of kindness for planet earth.  

One of the simplest energy savings tips is caring for your water heater by wrapping it up in an insulated blanket, and it can help you save $20 for gas and $50 for electric heaters annually. Setting it to 120 degrees also boosts energy savings and improves safety.

When temperatures are extreme, be thoughtful about your thermostat settings. Adjust accordingly: 68 degrees in the winter, 78 degrees in the summer. Turning your thermostat down 10-15 degrees for 8 hours a day can save you up to 10 percent on heating and cooling costs. Upgrade to a programmable thermostat to make it a simple, automated task.

Another one of the simplest energy saving tips - turn off computers and other devices when not in use. Leaving your PC constantly running could be unkind to your wallet – to the tune of over $100 a year.

Many of the devices we use daily ruthlessly consume electricity, even when they’re switched off. This vampire power consumption can be curtailed with the help of point-of-use surge protection. Rather than unplugging each item individually, with the flip of a button, power to every device plugged into a surge protector is simply and easily terminated. A perfectly humane way to cut off unnecessary power consumption.

Surge protection can also safeguard your checkbook from the hazards of excess energy. Whole house surge protection adds an integral layer of security against budget-busting power surges that can quickly zap your expensive electronics. Be considerate of your wallet. The cost of replacing a single large home appliance such as a TV or hot water heater could cost you twice the expense of an investment in whole house surge protection. Find out how much professionally installed surge protection can save you from getting zapped with a free in-home quote from Mr. Electric®.    

Looking for a few more energy saving tips to protect your pocketbook? Treat your home and your budget to a little kindness with the loving care of Mr. Electric today.

Electricity is an integral part of every home and it would be difficult to find a single room in your house that doesn’t have an appliance or fixture that doesn’t operate on electricity. That’s how reliant we are on it. Despite the fact that we can’t really function without it, electricity can be an extremely dangerous commodity; and if you have children in your home, you would have to take extra measures to ensure they are protected from electricity in the home.

Any parent who has had a toddler in the house will tell you that their little one was at one time or the other, fascinated by electrical wires, electrical outlets and appliances. Most children are very curious at that age and don’t think twice before putting a dangling table lamp wire into their mouth or they may try to insert their little fingers into an open socket etc. In short, your home becomes nothing less than a danger zone for your child.

The good news is that it’s possible to address most of these dangers and protect your children from the hazards that these electrical installations pose. Here are some of the things that can be done:

Electricity is something that poses a distinct danger to children. As a parent or a caregiver, it’s your responsibility to be proactive with protecting children from this potential danger. For installation of child-proof electrical installations, call Allround Electrical at 1300 169 263. You can also drop us a line via email.

Thanks for reading,1300 169 263

Over the last several years, a variety of electric cars have come to market that provide consumers with an energy-efficient, environmentally friendly alternative to your standard gasoline powered vehicle. If all of this is true, why haven’t they caught on? One of the biggest reasons why electric cars have been accepted so slowly is because many people believe a wide variety of myths and misconceptions about how the vehicles work. Here are a few of the most common misconceptions that are encountered by your electrician in Santa Monica.

They Don’t Go Far

Most people view electric vehicles as a limited range, low-power option to their traditional vehicle. Although this could have once been true, it is not always the case today. With the current advancements in battery technologies, electric vehicles can go fairly far distances. Because most U.S. workers drive about 40 miles each day, an electric-only car can be a viable alternative for their driving.

They Aren’t Actually Green

Many people believe that electric cars are just as polluting as their gas-powerd competitors. Although electric vehicles will have a certain level of emissions, they are much lower than even the most efficient gasoline and diesel competitors.

Batteries Are Dangerous

Many people believe that the batteries used in electric cars are dangerous, toxic or just environmentally unfriendly. This is typically due to the fact that most people just aren’t all that familiar with electric vehicles and the batteries that they use within them. Although some battery chemicals can be hazardous, it is very rare that these chemicals ever escape into the environment. To make this even better, most newer batteries can be recycled at a rate of around 99 percent.

If you are considering an electric car, give us a call at The Electric Connection to talk about your options for electric vehicle charging stations and other power necessities to ensure that you can always charge your vehicle. You can also learn more at visit The Electric Connection (Click Here) .

You know that misusing your electrical system can be dangerous. With so much power coursing through the wiring in your home, it’s possible to cause a house fire if your system isn’t working properly.

Although an overcurrent protective device is installed on your electrical system to prevent house fires, you shouldn’t rely on that exclusively for your family’s safety. To ensure you and your family is safe, it’s important to know how to reduce the load on your circuits to prevent blackouts and the potential for a house fire.

An electrical overload is when one circuit in your household is expected to produce more power than it can reasonably handle. You don’t have to be a licensed electrician to recognize you are overloading your circuit. If you notice that your power trips when you plug in an electrical device, then you are overloading the circuit that electrical socket is on. Fortunately, there are ways you can reduce the load and prevent blackouts.

The easiest way to reduce the load any one circuit is responsible for is to use another circuit. If your circuits aren’t mapped out in your breaker box, then you can reasonably determine what sockets are associated with different circuits by manipulating the switches. Once you turn off the electricity in one room, you can test what sockets aren’t working to determine what sockets in your home are associated with each circuit. There is no danger to you by doing this, but it is time-consuming.

Armed with the information about what sockets work on the same circuit, you should distribute your use of electrical sockets across various circuits. By using other electrical outlets, you will avoid the tendency to cause a blackout.

You can improve your home’s safety by being mindful of your electrical system. If you are experiencing blackouts or you rely on a lot of electrical devices, it’s important that you avoid overloading your system. Beyond switching to a new circuit, you can have a member of our team install a new circuit which would help reduce your electrical load.

Most people have dealt with a power cut at some time or the other. There could be a very bad storm or lightning could strike and the power could get cut; but it also returns quite quickly. However, you might switch on the computer and notice it has stopped working.

This is caused when lightning hits a power line which results in a sudden surge on the electrical pressure that overloads the electronic circuitry. It’s true that lightning strikes cause power surges; even everyday appliances in our homes can cause power surges every time they are switched.

Over time, these seemingly small surges can cause a lot of damage to your property; and they slowly reduce the lifespan of your refrigerator, computer or air-conditioner or any other appliance that’s plugged into a power outlet or any that’s been hardwired into the electrical system in your home. The one way to protect your property from damage is to learn more about what power surges are.

Across Australia, the basic electrical voltage for residences is 230V + 10% up to – 6%. The load vibrations are taken into account in this particular range, as the appliances quickly cut in & out. In case the voltage increases above the working range of the appliance, it can result in arcing in the appliance.

These arcs generate heat, and these results in damage to the electrical components within the appliance. This type of damage is cumulative and the appliances are still able to function normally, till the point the damage becomes so excessive that your PC or TV just stops working for no apparent reason.

For all plug-and-play appliances like your TV and PC, you can connect them to a point-of-surge protector, and that becomes a very easy solution. This particular system is very much like a standard power board. You simply have to plug in the appliances that have to be protected, into the device. This device doesn’t suppress/arrest the surge; it redirects that surge straight into the ground. If you have to protect only a single appliance and a point-of-use protector doesn’t fit, then it’s possible to get a special outlet with the built-in protection installed.

Even as the point-of-use devices protect various appliances which are typically plugged into any power outlet, you would have to get another device to protect those items which are hardwired into the electrical system of your home, including the lights and air-conditioners. These devices can be easily complemented by an electrical panel surge protector.

If it’s installed inside the mains, it will level out the fluctuations and power spikes; or it might also stop them well before they reach the devices. When a mix of electrical panel surge protection and point of use protection are used, it helps provide your equipment and devices from very powerful voltage spikes.

If you have consistently experienced any power surge issues in the past or if you want to just protect your property against the probability of surges, you only have to call us and speak with our experts. They will provide you with all the information and guidance you need and will ensure that you get the kind of solutions that work perfectly for you.

For more information, simply speak with the experts at Allround Electrical and take their advice on various aspects of CBUS installations. The number to call is – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263