Saving energy is a laudable goal. By using less electricity and other energy around your home, you reduce your contribution to environmental degradation and climate change. On the other hand, easy and reliable access to electricity is in large part responsible for the high standard of living that most Americans enjoy. Read on to learn more about the intersection between comfort and energy consumption, and how you can cut back while still participating in modern 21st century life.

Energy Consumption and GDP Go Hand-in-Hand

When it comes to residential households, cheap power allows us to run the electrical work that lends so much convenience and comfort to our day-to-day lives – refrigerators, air conditioners, lights, computers, televisions and much more. On a societal scale, access to fossil fuels and the energy potential stored within is what has made possible so many technological and logistical advances in the first place. However, as the years advance, the science is becoming ever more clear – excessive carbon emissions are causing the planet's climate to change, often in destructive and unpredictable ways.

Of course, no one wants to go back to the days of pushing a plow behind a donkey and churning butter by hand, either. The big question, and one that may become existential, is whether we can decouple our energy consumption from our standard of living. Historically, consumption and GDP have risen together in lock-step. Can the United States and other developed countries figure out how to break the chain?

Decouple Lifestyle from Consumption

A recent report by the Energy Collective tells us that “reductions in energy intensity is arguably our most important tool to achieve a sustainable energy future.” What does it mean? That we can get the same or more production out of less energy usage. In some ways, we've already made progress – between 2007 and 2013, energy consumption dropped 4.5 percent in the United States, while the Net Domestic Product continued to rise.

That's all well and good for the country, but what about your household? The same principles apply – for a more sustainable future, look for ways to get the same results with less energy use. That means switching to efficient appliances, like Energy Star certified equipment. It means replacing old incandescent light bulbs with modern LED models. And look for little changes that can make a big difference, like adjusting your thermostat a few notches up or down to reduce the load on your HVAC equipment.

Make a Difference in Your House

You can do your part to cut down on your energy use while still enjoying the amenities of modern life by making targeted efficiency investments and simple behavioral changes. If you need tips on how to reduce your energy bills without reverting to stone age-style living, or need any other electrical work, contact a reputable electrician today.

Regardless of bends, twists, or turns, Example of a cut line on LED strip lights

2. You will now have two LED strip lights. Carefully peel back the end portion of the paper strip covering the strip’s adhesive backing, and then remove the 3M VHB adhesive from the solder pads on the bottom side of one of the strips. The strip with its adhesive peeled back will be the top strip when soldered.

5. Align the non-tinned strip segment (strip with adhesive removed) directly over the newly tinned pads, and apply heat. Hold the soldering iron in place until the solder remelts and begins to flow. To strengthen the bond and improve visual appeal, a small portion of solder can be added to the top pad.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split and solder a run of non-weatherproof two-conductor or connecting wires. Peel away the blue wire so that only the positive (red), negative (black), and control (green) wires are left.

*No wires should be peeled away if you’re joining single-color or standard RGB light strips.

3. Properly heat your soldering iron. For best results, clean and tin the tip of the iron immediately before soldering. To tin the iron, touch solder to both sides of the iron’s tip.

4. Next you will need to tin the solder pads on both ends of the split strip light. When soldering, always apply heat to the target area on the strip and not directly to the solder. Once sufficient heat has been applied to the area, start introducing solder.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split, solder, and reseal a

3. Follow steps two through five located at the top of this post for soldering a standard RGB strip light.

4. To reseal the strip light, apply

The LED strip lights are now connected, and power should flow through the entire length of the weatherproof strip.

Almost 2/3rd of Americans decorate there home with some sort of electric lights during the holiday season.  Over half require the use of some sort of extension cord and or power splitter during there holiday lighting decoration process.  The National Fire Protection Association (NFPA) Reports that Christmas tree fires alone cause on average an estimated $16.2 million in direct property damage, 16 injuries, and 6 deaths every year.  This statistic does not include injures or deaths due to outdoor lighting electric shock or fall injuries such as ladder work.

As there are performance standard. All lights that are DLC Qualified have been tested and meet or exceed these requirements. Most recently, DLC has created a higher performance standard, DLC Premium. With DLC Premium, the LED lights are among the most efficient available. For example, our LED Retrofit Kits are DLC Premium Listed, while many of our competitors’ products are only DLC Standard Qualified.

To you, the consumer, this means a DLC Premium retrofit solution will be 20-30% brighter and / or use 20-30% + less energy. Comparing our units at 165 lumens/watt versus a competitive product at 97 lumens per watt, their product requires 135 watts to produce the same amount of light our product needs barely over 75 watts to create. To you, this saves you thousands of dollars month after month. So while both carry the DLC qualification symbol, ours will save you much more every minute the light is turned on.

One of the benefits of retrofitting is you get to recapture the investment in your existing fixtures. Think of a car dealership. Many are beautiful architecturally designed fixtures and the dealership had spent a lot of money to have them installed. The owners would like to convert to LED, but installing a new fixture is not an ideal solution. First, the finished result would not look as aesthetically pleasing as the current appearance. Second, the investment in the existing fixtures would be ‘throw away’. With a LED retrofitting kit, think of the driver as the ballast replacement and the head as a replacement for the metal halide bulb.

Secondly, most of the times a retrofit kit solution is less expensive than a new fixture solution. So not only are you able to recapture your fixture investment, but converting to LED should be cheaper than replacing the fixture with a new LED fixture.

Being DLC Premium Qualified, each kit must be backed with a 5 year warranty. Since our heads are so designed so thermally efficient, the heads have been upgraded to a 10 year warranty. The drivers come with a standard 5 year warranty, but an optional 10 year warranty on the entire unit is available. This means that you should not have to worry about replacing metal halide bulbs and ballasts for 10+ years. For some of our customers, not replacing bulbs and ballasts is almost as if not more important than energy savings provided by converting over to LED.

Our most powerful kit produces close to 51000 lumens while only consuming 350 watts. We believe we have some of the most, if not the most, efficient retrofit kits on the market today. While others are capable of creating 51000 lumens, they need significantly more watts to be able to do so. This is important, because one of the reasons you are probably considering on converting to LED is to save money. But it would be wrong for you to think that all LED solutions are the same in terms of efficiency. Some of our competitor’s kits are rated at 97 and 110 lumens per watt. Our fifth generation of LED retrofit kits are rated up to 165 lumens per watt. This means our competitors are 50% less efficient than our latest models. Over the life of the LEDs, this means you electrical bills are going to be significantly higher than it needs to be. Yes, it will be lower than the current metal halide or high pressure sodium bulbs you may currently be using, but they will cost you significantly more to operate over our latest ultra-efficient retrofit solutions.

The most important thing to do is to match the correct retrofit kit with your existing lighting. We created 11 retrofit kits as part of our family of LED solutions, from 30 watts all the way to 350 watts. Each unit is designed to fit into your existing fixture without the need for taking down the fixture and sending it to use so we can create a custom plate. Some suppliers provide that as their solution. With our 11 retrofit kits, there is no need to take down a fixture and send it to our offices so that we can design you a retrofit plate. Retrofitting Content by MyLEDLightingGuide