What is Radiant Floor Heating and what are the advantages of it?? We get asked that often.

Radiant floor heating is the best heating system a house can have and one that you don’t realize it is there! Just imagine: no radiators clanking in the night and no vents whooshing like a jet preparing for take off!! No dust – collecting ductwork that runs up your allergist”s bills. That’s the advantage of radiant floor heating. It is an even blanket of heat, right where you want it. It’s also a highly efficient way to heat a house, increasing comfort as it reduces energy costs.

This is how radiant heat works – In a radiant setup, the warmth is supplied by hot-water tubes or electric wires buried underneath the floor. As the invisible waves of thermal radiation rise from below, they warm up any objects they strike, which radiate that captured heat in turn. Though the air temperature remains relatively constant, you stay comfortable because the surrounding surfaces aren’t stealing warmth from your body.

Contrast that with what happens in a conventional forced-air heating system, the kind found in most homes. Air blows out of the registers at a well-baked 120 degrees, rises to the top of the room where it quickly sheds heat, then drops back down as it cools. The air in the room becomes uncomfortably stratified: Your head can be bathed in warmth while your toes lie in the frozen zone. Then there’s the problem of cycling. “You turn on the furnace, it quickly takes you to 68 or 70, and then shuts off. The result is a phenomenon he calls “the cold 70,” which is what you feel right after the hot air stops pumping from the registers. Those jarring ups and downs are absent with radiant floors, which may reach 85 degrees, tops, on a frigid day. The warm air still rises, but it does so evenly over the entire floor, so the coolest air stays up at the ceiling.

One of the limitations of some grid-tied photovoltaic systems is that the owner will only benefit as long as there is sunlight while the grid is functioning. Otherwise, if there is an outage, they may not even use the energy they are generating from the rooftop. During such times when the grid is disconnected, the owner can neither use the rooftop solar nor export the energy to the grid.

Owners of PV systems without backup functionalities can upgrade by adding AC coupling. This enables them to store energy and use it anytime, including during emergencies and grid outages. The AC coupling converts a simple grid-tied system into a Grid/hybrid or grid interactive system. This provides grid-ties savings whenever the grid is up and running, and off-grid independence, as well as security when there is a utility outage.

The main components of AC coupling include an energy storage system, a grid-interactive inverter/charger, a coupling device and the second panel with additional wiring for the critical loads to supply during outages.

Battery storage enables better power management by providing a number of benefits which include:

LEDs are the longest lasting lighting technology available today. They contain no harmful gasses and are safer for the environment than incandescent bulbs. But if there’s one fact about LEDs that’s considered the most, it’s that they’re extremely energy efficient and are designed to save money! We wanted to show you the results of switching from incandescent bulbs to LEDs, so we developed an LED 

Among other helpful pieces of information, the calculator lists savings per month, savings per year, savings on incandescent bulb replacements, and a break-even point that tells you how long it will take to notice those savings. Here is an example of calculated savings for replacing 10 incandescent bulbs with LED bulbs: