The best Allen electrician can tell you that chances are, your air conditioning unit is probably going to be the most frequently used electrical appliance in your home this summer.  Making sure that the a/c unit is running efficiently and safely is the best way to save money and prevent costly and dangerous electrical problems. Still, as the best Allen electrician will also tell you, preventing electrical issues can be difficult for someone who doesn’t recognize electrical problems immediately. After all, most of us who are not professionals probably don’t.

Surprise! It’s NOT Your Unit

As the temperatures rise this summer, keeping up with the maintenance of your air conditioning unit is one of the most important things you should do. However, when customers hear about maintaining their a/c unit, they often think in terms of Freon and condensers. The truth is that, although those are clearly important, one aspect that is often overlooked is the electrical part.

It may surprise you to know that calling an air conditioning guy when your unit is on the fritz isn’t always the right thing to do. In fact, any Allen electrician will confirm that, indeed, half the time the problems aren’t with the a/c unit but with the electrical system. If the problems are electrical, they can result in dangerous blowouts and burnouts that could cost you a fortune—or even your home, if a fire were to start. So, with so many things that could go wrong, how can you be sure that the problem calls for an Allen electrician and not an air conditioning repairman?

Air Conditioning Electrical Safety Tips

For instance, did you know that a lot of electrical problems arise when swapping air conditioning units? Something as deceptively simple as trading your current unit for another one, especially if the new unit is larger, can wreak havoc on your electrical system. The amount of wattage required to power the new unit can result in overloading, overheating and damage to the unit as well as to your home’s electrical system. You can burn the lines quickly. Some who think that they have found the solution in splicing their lines to accommodate a newer unit may also be in for a dangerous wake-up call. Splicing lines is never a good idea. When in doubt, call your local electrician. He understands what should be done.

Another thing that your electrician understands that you may not be aware of is that you need him to come out and inspect your circuit breakers regularly to make sure that no wires are melting, no circuits are going bad, and there are no potential fire hazards looming. Because a/c units consume so much power, many times they are wired directly into a circuit breaker. Loose connections in the circuit breaker can cause many problems, including irreparable damage to the electrical system. Be sure to always have an electrician come check your breaker and wiring to be on the safe side.

The electrical work is not limited to the obvious parts of the unit that may need help. The Forced Air Unit (FAU) part of your air conditioning unit is one of the most prone to electrical failures, and yet it is the one part that is often overlooked because it’s located somewhere in a closet, a spare room, or a utility space inside the home. The blower fan inside the FAU often blows out, causing issues with the overall functioning of the unit. Here’s the best way to prevent this: Make sure your electrician does routine maintenance on every part of your air conditioning unit, including the FAU, to prevent blowouts.

Electric Man: Best Allen Electrician

The best Allen electrician makes no bones about the importance of checking your electrical systems when turning on your air conditioning for the sizzling Texas summer, and how much you can save on your summer electricity bill, repair costs and a/c maintenance and repair. As summer heats up, let the team at Electric Man take a look at your unit and help you save money, time and repairs. For more helpful tips, read ElectricMan’s blog or connect with us on any of our social communities. If you have any questions, feel free to call us at 972-792-7270, or use the Contact form on our website!

On any job site, having the right electrical safety gear is essential. For electrical projects, there are often special considerations, as some tasks can have unique hazards that require special gear.

Eye injuries are serious and for most electricians are a daily hazard. Having, and using, the right eye protection can make all the difference.

Electricians often work at heights, either on roofs, scaffolds, or elevated work platforms. In some locations, even working on a step ladder can require fall protection gear.

When the potential exists to fall more than 6 ft., fall protection gear should be worn. This includes an approved and inspected harness and a lanyard with the correct weight rating. Always ensure that the fully extended length of the lanyard is short enough to prevent the worker from contacting the ground in the event of a fall.

Hand injuries are the most common type of workplace injury, therefore selecting and using the right kind of gloves is vital.

Along with proper knife safety practices, using cut-resistant Kevlar gloves can greatly reduce the potential for cuts and scratches. In cold weather, ensure that insulated gloves are worn. When dealing with potentially hazardous chemicals, use gloves rated to handle the specific associated hazards.

It is not news that LED is becoming the new standard in saving money on your lighting bill. But with every new technology, the options are endless and plentiful, and sometimes clever marketing hides what really is important. If you understand the technology, its easy. If your new to the technology, you have to try and determine what is or isn’t important. Which makes the purchase decision even harder for those trying to navigate this maze of product availability and specifications. And to confuse the consumer even more, there is a lot of data being presented that is not created based on any agreed to standard. Read 10 different product brochures on what the marketers believe is the proper solution to replace 1000W Metal Halide and you will read everything from a low as 26,000 lumens to 70,000 lumens. Or what one manufacturer calls day white is total different than what another manufacturer thinks day white is. The best advice we can give the consumer is walk through the same process we do when we select our products to sell. We look for quality, performance, efficiency and great engineering. Let’s break that down to what that means.

Are the LED Lights UL or ETL Listed. This is the safety test. No one wants an unsafe product. The product must be able to perform without any chance of hazard. Are the lights DLC or Energy Star Rated? DLC (DesignLights Consortium) is a performance standard that makes sure the lights are efficient and perform at a high standard. It typically applies only to LED lights, but lately the standard has been broadened to include lighting controls. Energy Star is a consumer standard that applies to many products including small LED screw in bulbs. Up until recently, DLC did not have a provision for screw in bulbs, but has recently changed to allow some screw in LED bulbs.

Are the factories ISO Qualified? A lot aren’t, a lot say they are but aren’t. Some will say they abide by the ISO standards. What does that mean? Some will come up with their own marketing buzz words that sound great on paper and are very clever, but aren’t ISO certified.  To us, ISO certification gives us the peace of mind that the products we supply our customers are built and tested in an exacting and consistent manner with the least amount of risk of failure.