Saving on electricity is always the smart way to go, and you’ll find that you can keep monthly bills way down if you just do a few smart things to cut back on your electric power consumption:

Use Fans instead of AC – Winters in Texas may be warm, but the summers are comparable to sitting in the desert. You’ll find that using your AC is the only thing keeping you alive, so the thought of turning them down may be making you sweat. Turn down the AC a few degrees, and turn on some fans around the house. The breeze will cool off the home, and it will blow the cool air around nicely.

Switch Out Light Bulbs – One great way to save on electricity around your home is to use energy saving bulbs. An 18W power saver will produce as much light as a 60W regular bulb, but only use 18W. It will be a steep initial investment to replace all of the light bulbs – the power saver ones are costly – but it will cut your electric bill dramatically.

Use Power Strips – Your TV, DVD player, radio, Xbox, and other devices all use power when they’re turned off, as they’re in standby mode. You should consider plugging all of these devices into a power strip, and just turn off the power strip at night. It will cut down the amount of energy that’s used, and you’ll never know the difference.

Reduce Appliances — Do you really need a toaster, microwave, dishwasher, blender, food processor, juicer, two coffee machines, an espresso maker, and a coffee grinder? You probably need some of these appliances, but you can probably eliminate a few of the ones mentioned above. Use more gas-powered appliances, as gas is cheaper than electricity.

Replace Old Appliances – Did you know that older appliances tend to use a lot more electricity than newer ones? Newer appliances are made according to Energy Star regulations and standards, so they’ll be cheaper in terms of energy consumption. Replacing them will cost you a bit, but you’ll recoup your investment within a year or two.

Turn Down the Heater – If you are using an electric boiler to heat your water, chances are you’ve got it set too high. You probably want to enjoy a nice shower in scalding water, but most people have to turn on the cold water when they shower. If you want to save on electricity, turn down the heater until it’s just nicely hot instead of scalding. You won’t have to turn on the cold water to shower, and you’ll still be able to enjoy a nice hot shower!

Saving electricity isn’t just smart – it’s cost-effective and wallet-friendly as well!

The United States has three main power grids: The Eastern and Western Interconnection, which each service multiple states, and Texas, which gets an independent power grid. The Electric Reliability Council of Texas, or ERCOT, handles 85 percent of the state’s power needs, producing and distributing electricity to 23 million people.

But, why does Texas need its own grid?

Slate reports that during World War II, Texas was home to many factories required for critical supplies. The electrical planners didn’t want to depend on energy coming in from other states, so they used the abundant natural resources to set up a grid specifically for Texas. Even today, this state requires a massive amount of electricity to keep the industrial sector powered, so it makes sense to have a dedicated grid.

Texas has a strong culture of self-sufficiency, which had an influence on the development of its own energy grid. It does have links to the other interconnections, which get used during particularly high demand periods. Unusually hot summers or long heat waves can sometimes lead to Texas importing energy, so the air conditioners keep going strong.

The utility companies governed by the ERCOT typically do not sell energy outside state lines. This configuration allows Texas to set most of its own rules and regulations, as opposed to the Federal Energy Regulatory Commission setting oversight in place. State regulators can make decisions that make the most sense for their residents, rather than making adjustments based on the needs of multiple states.

Texas has the space and natural resources needed to produce inexpensive electricity for residents and businesses. These costs fall below the national average. Renewable energy sources, such as wind-powered electricity, are moving Texas to more environmentally friendly options.

However, inexpensive energy does have a downside. Population growth in Austin is significant, thanks to startups, tech companies and other businesses moving into the area. Google Fiber also plays a role in bringing in more people. The energy grid needs to adapt to the rising amount of individuals who call Texas home, but electricity companies have less of an incentive to build in Texas compared to states with higher energy costs.

Contact Bryant Electric Service to make sure you’re getting the most out of the Texas Power grid and take back your energy today!

Any room, area, facility, or outdoors space you need to illuminate should be done so with quality lighting. The benefits of quality lights far surpass going cheap on your lighting fixtures just to save a few dollars. The importance of quality such as metal halide have a rather short lifespan compared to it’s competing technology, LED. LED gymnasium lights, and just LED lighting in general, prove to have a much longer lifespan. This lifespan can be 2-3 and sometimes even 4 times longer than other light sources such as metal halide.

This can allow for less frequent purchasing of new lights to replace old and burnt out ones, which will allow you to better realize a better ROI by investing in LED over metal halide or other similar technologies. This also indirectly reduces your maintenance costs by lowering the amount of time you have to pay someone to switch out burnt out bulbs. This can allow you to reduce your maintenance costs related to your lighting for gym areas by 2-3 times, which will just add on to the benefits that LED can bring to your facility.

While saving money through lighting efficiency, longer life spans, and less maintenance costs is great; it shouldn’t be achieved while decreasing the quality of light produced in your facility by your lighting system. Luckily, LED products allow for proper lighting in a wide range of applications, even your gymnasium. This allows you to create exceptionally safe areas that will keep visitors aware of all there surroundings.

Did you know that LED lights that are efficient called the DLC (DesignLights Consortium). This is an organization that qualifies commercial lighting products based on it’s quality and efficiency. There are both standard and premium qualifications, and premium typically yields higher rebates and thus higher ROI over standard qualified products. Although both are still good and are always recommended for any industrial lighting purchase because being qualified is better than not at all. Without being qualified, we recommend you stay far away from any light that isn’t DLC qualified for various reasons including it not being verified to be a “good” product.

If it isn’t clear by now, the answer is obvious. LED can, will, and should be bringing your gymnasium area all of the benefits that the technology offers.

From efficient, to quality and rebates; there is almost no reason why you should choose other gym lighting technologies over LED gym lights.

More importantly regarding safety of all visitors; LEDs will ensure your areas are properly illuminated with a wealthy amount of light, and won’t be under lit. Also since LEDs will never buzz nor flicker, you will never face that annoying issue that other technologies will do, not even near the end of it’s lifespan. And as you know, buzzing or flickering lights can cause annoyance and less focus, which is never good for a gymnasium environment.

Conclusion

There you have it, what quality LED lights can and will do for your gym. LEDs are also a great option for all of your other lighting needs, such as school rooms, hallways, write in to one of our professionals for some answers.

What’s more important than reliable access to electricity? Safe and reliable access to electricity! We use tools and appliances every day. Heck every hour. And in some instances, every minute. But generally speaking, we don’t really pay much mind to how safe we’re being with it. But you should. Accidents happen all the time (and if you like statistics, boy we’ve got ‘em right here!), and whether you think it could happen to you or not, the fact of the matter is we put ourselves at risk all the time.

This is why it is outright critical that we ensure we’re taking all of the steps we can to protect ourselves, our homes, and our loved ones. Luckily, safety isn’t all that hard, and really takes a minimal time investment. Here at Kolb Electric, your safety is the top priority to our Alexandria electricians. So take a moment to read up! You might learn something new.

Regarding Electrical Supply

First off, to use any appliance safely, you should always keep in mind the right places to use them relative to your home’s safe supply. We’re talking, of course, about dedicated circuits. We’ve spoken of them many times, but it’s important because ensuring the proper appliances get the proper setup is key to operating them safely. Appliances that should be on dedicated circuits include:

Also, if your appliance is going to be near water sources (kitchen/bathroom appliances), be sure they are plugged into a GFCI outlet. Don’t have GFCI outlets? Looks like it’s time for some installation!

Using Power Strips for Your Appliances

Don’t “daisy-chain”, be sure you’re using indoor for indoor, outdoor for outdoor, never cover your cords (generates dangerous heat), and don’t exceed the safe capacity. Also never use power strips or extension cords to power heaters or other high-wattage appliances. They weren’t designed to handle that much power, and they may overheat/catch on fire.

General Appliance Safety Tips from Our Alexandria Electricians

Rules of thumb that promote safety are a great idea, and our Alexandria electricians are here to give you the rundown!

Need the services of a certified electrician to beef up your home safety? From outlet installation to wire repair, our experts have you covered! Contact Kolb to learn about our services, or to set your appointment today!