Most people have experienced a circuit breaker trip at some time or the other; and the first couple of times it happens, it can be quite alarming. However, this is a very important safety component in any electrical circuit. A circuit breaker is essentially an automatic device used to stop the flow of current within a circuit, as a safety measure. It is specifically designed to protect your property, equipment in your home/commercial space and you from overloading the electrical circuit.

The sole reason a circuit breaker trips is to prevent the overheating and overloading of an electrical circuit, beyond the capacity of that circuit. If there is no breaker in place, the electrical units in that circuit can get damaged and potentially lead to a fire.

In case a circuit breaker trips, the very first thing to do is to locate it in your panel box. The switch you are looking for is the one that isn’t completely in an On/Off position. Once you turn the switch into the ‘on’ position, the power will be restored. In case the power doesn’t come on, simply switch it off and then on again.

If the circuit breaker trips even after you have reset it, don’t just try resetting it again. It’s doing what it’s designed to do and telling you that there is something wrong that has to be investigated. There are three different things that can cause a circuit breaker to trip:

This is the commonest cause of a circuit breaker trip. It occurs when the electrical energy that’s flowing through the circuit is much more than what it can handle. The simplest way to solve this problem is to redistribute the power to some other circuits. Very simply put, in case too many heavy appliances are connected to a single circuit, move a couple of them to one that isn’t as loaded.

It’s important that you check whether the circuits aren’t loose. First, switch off the power and look for any loose wires; you can do this by closely inspecting the hot wires and outlets that lead from the service panel to the circuit breaker, and then tighten the connection that’s loose.

If after checking the circuit overload, you find there aren’t any issues in that areas, the problem could be a short circuit. This is caused when any live wire touches another neutral/live wire. At times a short circuit may be caused by a broken wire within the breaker. It’s far more difficult to identify this as it could be just about any part of the wiring system which is connected to that circuit. At times, the culprit could be an appliance that’s plugged into an outlet.

This issue is quite a dangerous and severe one and it’s important that it be diagnosed quickly. It can be quite tedious to look for a short circuit and the outlets, plugs and wiring that are connected to that circuit, but these checks are important. Look for cracks or signs of burning in the insulation and call an electrician without delay.

If it’s neither a short circuit nor a circuit overload that’s caused the circuit breaker to trip, it could be a ground fault issue. This happens when any hot wire touches the metal outlet box or the ground wire.

If a circuit breaker trips in your home or commercial property, keep in mind that it’s a very serious issue and not something that should be ignored. For the best electrical solutions, call Allround Electrical at 1300 169 263. You can also drop us a line via email or contact us through this online form.

Thanks for reading,1300 169 263

If you work in hazardous locations and conditions, you would understand the need to promote safety and ensure that the risk of explosions is reduced. It is crucial that you eliminate one or more component of the ignition triangle to minimize the chances of an explosion. The 3 protection methods listed below are widely used in hazardous locations, in the process control industry:

Before we delve a little deeper and understand these techniques, let’s take a quick look at the role electrical enclosures.

Electrical enclosures are cabinets containing different electrical components such as switches, sockets, plugs, knobs, transformers and controls. These keep the surroundings safe from any kind of electrical hazard. Such enclosures are resistant to spark and shock and they have a high tolerance to extreme temperatures. They must be used in hazardous locations as they keep an interior explosion from spreading to the external environment and damaging life and property. Let’s see how they are relevant in the Containment method of protection:

We almost all work with electricity on a day to day basis, but do you really think about the precautions that are in place to assure your safety? One of these precautionary measures is electrical grounding. Years ago, grounding was discovered as a way to protect individuals from becoming electrocuted in using normal electrical appliance. For instance, think about your refrigerator. If something went wrong and you happened to touch it, the electricity would flow through you, and you would be electrocuted.

Grounding wires the electrical item to the ground itself. So if something went wrong, the electricity is pulled away from the machine (and you) and into the ground. In the past, this had to be done individually for each item. However, technology has advanced now where grounding precautions are built into electronic devices around the home. When you plug in the device it is already essentially grounded and you are protected.

If you use any older electric products around your home, or you suspect the grounding is not working properly, you may wish to get in touch with an electrician in Beverly Hills from The Electric Connection and let him or her help you make certain the object is properly grounded and not a danger. Taking these safety precautions can make a big difference and protect you and your family from an accident involving electricity.

Spend some time looking over your electric items and make sure you are properly protected. Then call The Electric Connection an electrician Beverly Hills residents trust (Website). Not only can one of these experts help you with grounding and other safety concerns but with installation, repairs and whole-house electrical renovation too. Safety is always important when dealing with electrical implements, so choose a company that is willing to go the extra mile to protect the important people in your life. Not only can one of these experts help you with grounding and other safety concerns but with installation, repairs and whole-house electrical renovation too. Safety is always important when dealing with electrical implements, so choose a company that is willing to go the extra mile to protect the important people in your life.