There are some home repairs you don’t want to tackle. Here are several red flags to look for when you’re buying a home.

common plumbing problems. Water damage is the homeowner’s mortal enemy. Water causes foundation problems, rot and mold. Want to move into that mess? Probably not.

To see if your potential purchase has suffered the consequences of water damage, start outside and

When you see water damage near an electrical outlet or a light fixture, you may have stumbled onto a fire risk. But outlets aren’t the only place to look for potential electrical problems.

Look for flickering and blinking, which signals a poor connection somewhere along the circuit. Check to see if both halves of electrical outlets are functioning. Make sure bathrooms, kitchens, garages and outdoors have professional electrician should determine whether the home’s circuits or fuses provide adequate power and service. The electrician can look for burned wiring, improper connections, dead-end wiring or ungrounded switches and outlets.

Your home inspector is a font of knowledge! Have the inspector check the air quality of the home to see if any mold spores are present — if water leakage or other common plumbing problems have been an issue, mold may be, too.

The inspector can ensure that the heating and cooling systems are properly installed. The inspector can also determine how old the HVAC system is and ensure that its been maintained

Your inspector will also determine the type of pipe that supplies water to the house—old lead and galvanized steel pipes are going to need replacing.

If the house you’re considering fails these tests, it may be best to move onto the next. If you still think it’s the right house for you, despite the presence of common plumbing problems or the need for an electrical overhaul, negotiate a lower price or ask the seller to pay for needed fixes.

Questions? Thoughts? Leave a note in the Comments section orschedule service today.

Usually, people hire an electrical contractor without giving it too much thought. You might assume that a professional service will know how to get the job done in quick time and you won’t have to bear any hassle. However, there is more to electrician services than meets the eye. There are a few relevant factors you should consider when selecting an electrical service for hiring. The reasons are simple: you are letting in complete strangers into your home who will be working on the electrical system. You have to be on the safe side than take any risk.

To make things a tad easier for you, here’s a look at the top 5 things to look for in electrician services:

Did you know a certified electrician adheres to the highest standards of quality and services? Don’t you want the electrician you hire to work professionally and deliver you the best possible level of service? This is why it is important to look for electrical services which are certified and have the necessary credentials. Membership of a local professional organization is an added bonus but the key factor is experience. If an electrician has been in the business for a few years, you can be certain that he will be able to get the work done without causing you any inconvenience in the process. So, ask for certifications and qualifications when you interview an electrician service.

Insurance is a must. Regardless of how qualified and experienced an electrician is, electrical systems are volatile and something or the other could go wrong. That would not only cause damage to the wiring and outlets but also connected appliances. In the worst case scenario, the problem could exacerbate to the extent that it causes damage to your property. Now, if the electrician you hire isn’t insured, you will have to pay for repairs and renovation out of pocket. This is why only hire a certified electrician that is ensured as well. In addition, also check licensing to ensure the electrician service is allowed to perform residential electrical work in your area.

There is no dearth of professional electrical services in the market so you can afford to be picky when it comes to the cost of the services. When you get a quote from an electrician, make sure you have him break it down and check how much he is charging for which service. You can also ask around and compare rates to get a better idea of how much you should be paying for the work you need to get done. Rest assured, when you hire a certified, insured and licensed electrician who offers affordable services, the lower price wouldn’t mean a compromise on quality. This is a major reason you should keep these factors in mind when making a decision. This way, you will get great value for money.

It doesn’t take much for you to be able to judge the level of professionalism you can expect from an electrician. When you talk to them on the phone and then meet face to face, get an idea of their behavior and attitude. The best electricians show genuine concern for their clients and are focused on solving your problems rather than charging you as much money as they can get out of you. Be alert and take note of the appearance and attitude of the electrician. If you feel he is friendly, courteous and professional, don’t hesitate to hire. If not, you can always find another professional certified electrician.

Time to ditch the band posters! Show off a new painting or favorite framed photograph with a battery-operated picture light that installs easily and without messy cords.by Celebrate home ownership by decorating the front door or mailbox  with a customizable house number sign.

Repairs are an inevitable part of home ownership and there’s nothing quite as frustrating as not having the right tools. Cover all of their bases with a 130-piece tool set. Make small repairs and upgrades easy with a flexible work light that can clamp onto surfaces and direct light right where they need it.

Restriction of Hazardous Substances (RoHS): RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Warranties

Super Bright LEDs, Inc. offers a minimum 2-year warranty to protect against manufacturer defects and malfunctions. Longer warranties are available depending on the product. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair, or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.

Read more

Lifetime Warranty

Super Bright LEDs, Inc. offers a Lifetime Warranty on a variety of products to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted.

Read more

CE: Meets European health, safety, and environmental standards

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

UL Recognized: Product component safety and environmental certification from Underwriters Laboratories (UL) LLC

Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Recognized label ensures that a product component, such as a power supply or LED light strip, has been tested and verified as safe to use in a UL-Listed product. UL-Listed product samples are tested by UL and meet their Standards for Safety requirements.

DLC: Listed as a quality, energy-efficient product by the DesignLights® Consortium (DLC®)

The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC’s Qualified Products List. For more information, click

DOT Approved: Approved by the Department of Transportation (DOT)

The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.

SAE International Class 1: Classified for use as emergency vehicle lighting by the Society of Automotive Engineers (SAE)

Vehicle warning lights are ranked by the Society of Automotive Engineers (SAE) according to class. A Class 1 LED light delivers the most amount of light (in comparison to class 2 and class 3 lights) and is ideal for emergency lighting on ambulances and fire trucks as well as police and rescue vehicles.

ETL Listed: An ETL-Listed product meets national safety standards

A product that bears an ETL-Listed label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.

FCC: Complies with Federal Communications Commission (FCC) rules. Won’t cause harmful interference.

Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won’t cause interference with other electronic devices. According to FCC’s website, “The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories.” Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC’s guidelines and limits and do not cause harmful interference.

SAA: Standards Australia (SA) compliance

Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.

IP65

The weatherproof product allows zero entry of dust. It is protected against jets of water and may allow limited liquid entry.

IP66

The weatherproof product allows zero entry of dust. It is protected against strong jets of water and may allow limited liquid entry.

IP67

The waterproof product allows zero entry of dust. It is protected against the effects of immersion between 15 centimeters and 1 meter.

IP68

The waterproof product allows zero entry of dust. It is protected against long periods of immersion under pressure.

IP69K

The waterproof product allows zero entry of dust. It is protected against high-temperature, high-pressure water and steam.

UL 844: Meets requirements from Underwriters Laboratories (UL) LLC for use in hazardous (classified) locations

UL 844 requirements cover fixed and portable luminaires for installation and use in the following hazardous (classified) locations in accordance with the National Electrical Code, NFPA 70:

These requirements cover luminaires for use only under the following atmospheric conditions: