We wrote the UK and China) have been developing this lighting-based data transmission, which could revolutionize the way we connect to the internet.

One of the advantages of Li-Fi is its ability to function in electromagnetic-sensitive areas such as in aircraft or nuclear power plants, without causing interference. Additionally, Li-Fi signals cannot travel through walls, a welcome feature for many users who wish to increase their digital privacy, although this comes with its obvious drawbacks, such as difficulty in creating “blanket” wireless coverage.

It is important you not only feel safe in your home, but are actually relatively safe from most things. We know there are always hidden dangers around us. We can be ready to deal with these things and there are a few little things we can do around the house to help alert us to those safety issues. An electrician in Glendale has some safety tips that will make your home safer and make you feel a little more comfortable and safe when you and your family are home or away. The team at The Electric Connection can help you get these safety measures taken care of.

GFCI Outlets

These outlets can prevent electric shock. They are designed to shut off the instant the circuit is interrupted. These outlets are generally placed in bathrooms and kitchen areas. If an appliance comes into contact with water while plugged in, the outlet trips, cutting the current and preventing shock.

Electric Panel Inspection

It doesn’t hurt to have a Glendale electrician take a look at your electric panel. It may not look like much to you, but to the trained eye of an electrician, it can say a lot. You will learn about the condition of your breakers, the panel itself and the wiring that powers your home. If you have been having trouble with tripping breakers, this inspection will help you learn why.

Carbon Monoxide Detectors

All homes should have at least one carbon monoxide detector installed explains an electrician. Glendale homeowners can install the detectors themselves. They are usually battery-powered and can be placed in the home to alert you to carbon monoxide levels that are too high.

Smoke Detectors

You probably already have a couple of these in your home, but it doesn’t hurt to have a couple hard-wired smoke detectors installed as well. You can never be too safe.

Give The Electric connection a call today and schedule your safety upgrades.

Most problems with the electrical wiring in a house take a professional to handle. A certified Electrician (electrical contractor) needs to be consulted, so the problem is repaired correctly and to local codes. The city, county, and/or state where you live set the codes to make sure your house is safe to live in without electrical fires or other serious issues happening. Below are five simple tips to how to pick the right professional for the job.

If you’d like to speak more with a team member at Bryant Electric Service about having electrical work done, call our offices at: 512-402-8587.

Aluminum LED profile housings allow you to create customized light fixtures with LED strip lights. Our Klus brand LED channels are available in many different styles, including recessed-, or flexible, O-shaped, and more. Available in 1- and 2-meter lengths, the channels can be easily cut for any application from under-cabinet lighting and bookshelf lighting to showcase lighting and transition strip lighting. They’re available with a variety of lens options, such as clear, frosted, and etched that complete the profiles. We’ve put together a step-by-step guide for using these channels to create your own light fixtures. Please note that your specific channel might vary from the one used in this tutorial.

Materials needed:

1. With a pair of clippers, carefully clip through the clear plastic heat shrink as shown in figures A-C. You will want to take your time and be careful not to cut the strip’s wires while removing it.

2. Lay the LED strip into the channel, and position it along the bottom so that the ends of the strip and the channel are lined up (fig. A). Now, remove the paper from the strip’s adhesive backing (fig. B), and adhere the strip to the LED channel—starting at the lined end and working your way to the other end of the strip. Be sure to leave roughly 1/4-inch free at the end of the channel so that you can install the end cap as shown in figure C.

3. If one of your end caps doesn’t come with a pre-drilled hole, you will need to drill your own to allow the wires of the LED strip light to come through. In this case, we used a Dremel tool, but other options are viable as well. Regardless of the tool you choose, it is helpful to mark the end cap where you would like the wires to come through. Start the hole small, and increase the size as necessary.

4. Place the end cap on the wired side of the strip by threading the wires through the end cap as shown in figure A. Insert the end cap into the end of the light bar, and push firmly until it is fully in place (fig. B).

5. On the open end of the bar, slightly peel up the end of the LED strip (fig. A); this is necessary to install the end cap. Now measure your channel lens, and trim off the excess with clippers (fig. B). Be careful when trimming to avoid cracking the plastic. Excess material can be lightly sanded off. Once the lens has been cut to the proper length, slide it into the channel, and install the end cap as shown in figures C and D.

6. That’s it! Your customized LED light fixture is complete and ready for installation, which we will cover in the next step.

7. Mounting this LED profile is as easy as applying double-sided tape to the back of it and sticking it to your intended surface. Be sure to cut the tape to fit the back of the LED profile and to leave the tape backing on the side not attached to the channel until you are ready to mount it.

For most LED profiles, mounting clips are available for a more permanent installation.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.