During a recent trip down to Washington, DC I stopped by the National Mall to tour the astonishingly energy efficient homes on display as part of the Department of Energy’s Solar Decathalon.  The Solar Decathlon is one of the DOE’s signature programs to promote cutting edge design and green techonology.

The frequency of accidents caused by the incorrect usage of electricity has increased as our dependency on electronic devices has increased over the last several years. Every year, accidental electrical fires cause millions of dollars in property damages. Because of this, you should always practice as much electrical safety as possible whenever you use your electrical appliances and devices. To make sure that your home is as safe as it can be from electrical accidents, you should also consider talking to an electrician in Glendale about performing an electrical safety assessment, updating service panels and ensuring that your home is properly grounded.

Can you use any size fuse or circuit breaker in your electrical panel?

Many older homes still utilize an outdated fuse box inside the service panel, instead of a safer and more modern breaker panel. If you still have a fuse box, then it is very likely that your electrical system is not prepared to take the amount of electricity that you use every day. This results in fuses blowing very frequently for many homeowners. Rather than replacing blown fuses with the appropriately sized replacements, some homeowners choose to oversize the fuse in order to reduce the frequency of blown fuses. This can be very dangerous, though not nearly as dangerous as replacing the fuse with something that cannot blow, such as a coin. Doing either of these should be avoided. Fuses are protective devices that are designed to stop electricity from flowing into a circuit whenever it reaches a level that is dangerous. Whenever you oversize or bypass a fuse, your circuit can overload. This can lead to overheating, fire and electrical shock.

One of the best ways to deal with an older fuse box is to have your electrical service upgraded by one of the technicians at The Electric Connection. We can send someone out to upgrade your service, and install the appropriately sized circuit breakers in your new electrical service panel. If you are experiencing any issues with your electrical panel, please don’t hesitate to give us a call today.

Click here to visit our website.

Mortgage lenders try to look at the big picture, considering things like taxes and insurance when deciding how much they can loan out to homeowners and buyers. However, there's a major ongoing expense that appraisers currently don't take into account – monthly utility bills. You don't need to be an electrician to understand that the money you pay for power each month makes an impact on your budget and even affects the value of your home. A bill currently in front of Congress – the SAVE Act – would acknowledge that reality and let federal mortgage lenders make energy efficiency part of their formula.

Increasing the Value of Your Home

Essentially, the SAVE Act would make it easier to get financing for efficiency upgrades, even folding funding for it into traditional mortgages.

“This bill would require federal mortgage agencies to recognize the energy efficiency upgrades in a home during the mortgage underwriting process, thereby increasing the value of the home,” President of the Alliance to Save Energy Kateri Callahan said in a statement. 

The SAVE Act claims it would bring a number of benefits in addition to loosening the drawstrings on bank financing for efficiency. Among them:

A Diverse Group of Supporters

The SAVE Act was first introduced in 2013. Although Congress has yet to vote on the measure, it has lined up a diverse group of supporters who aren't typically on the same side of major issues, from the U.S. Chamber of Commerce and the National Association of Manufacturers to the Alliance to Save Energy, the National Resources Defense Council, the U.S. Green Building Council and others.

In the meantime, there are a number of steps you can take around your home today to cut down on your utility bills. If you need any help installing efficient appliances or upgrading your home electric system, contact an expert electrician today.

It used to be that the moon and the stars were the brightest bulbs in the sky. But as anyone who’s flown across a city at night knows, these days, there are an awful lot of outdoor lights shining up from the ground.

Many people assume that an orange nighttime sky is just ugly, not harmful. But recently scientific studies have suggested that light pollution is more than an annoyance; it’s destroying wildlife, damaging human health and costing us a lot of extra money.

That’s why a growing number of cities and towns across the United States are drafting ordinances to try to bring the night sky back. They’re requiring that all new outdoor lighting fixtures that are installed – both commercial and residential – only shine light down onto the place that needs to be lit, not up into the atmosphere.

Known as the Dark Sky movement, these ordinances vary from town to town, but often the requirements are similar. No outdoor lighting fixtures can shine any light above a horizontal line. Instead, everything must shine down.

“We’re not saying you can’t have that aesthetic value, you just light it from the top down,” explains Johanna Duffek, Sections Coordinator with the International Dark Sky Association, a Tucson, AZ-based non-profit group that’s at the forefront of the movement.

Although the original purpose of The International Dark Sky Association was to keep the night sky pristine for astronomers, today the Dark Sky movement is gaining ground because more consumers are interested in reducing their energy usage, and when you’re not wasting light that’s going up into the sky, you can use a lower wattage bulb to achieve the same level of exterior lighting.

For example, if a homeowner used an outdoor sconce that had openings on the top and the bottom, he’d have to use a 100-watt bulb. But if he switches to a Dark Sky fixture that only allows light to shine from the bottom of the fixture, the homeowner could use a 40-watt bulb.

“It’s a more efficient use of light,” explains Tom Patterson, Director of Product Development at Hinkley Lighting, which already offers some Dark Sky light fixtures. “You can use a third of the wattage or half of the wattage and get the same amount of lumens.”

Patterson says consumer awareness of the Dark Sky movement is still very low, but he said awareness has been growing among local government leaders, and that is forcing the manufacturers to come out with more and more Dark Sky-friendly outdoor fixtures.

“Now in Arizona, in all the new construction, you’re going to have to meet the dark sky qualifications,” Patterson says. “It’s catching a little bit more momentum.” Hinkley, for example, advertises that it can make about 25 percent of its outdoor lighting fixtures Dark Sky compliant. Retailers are charged about $15 to $20 to change a regular fixture to a Dark Sky fixture.

Currently, there is no official government standard for a Dark Sky fixture, but the International Dark Sky Association has been in talks with the Department of Energy to incorporate the Dark Sky philosophy into the Energy Star program.

The International Dark Sky Association also independently evaluates fixtures from manufacturers and awards a seal of approval to all of those that meet its requirements.

So far, Duffek says the International Dark Sky Association has awarded Fixture Seals of Approval to 75 different lighting manufacturers, and while many of those have been commercial applications, Duffek says the organization is hoping to increase participation among residential lighting manufacturers.

Hubbardton Forge, for example, makes a sconce that has received the Dark Sky Fixture Seal of Approval that features a slate-colored ceramic shield around the light bulb that forces the light down. And the Minka Group has several outdoor lights with metal crowns that block the upward light.

Both Patterson and Duffek say the biggest resistance to Dark Sky fixtures isn’t coming from manufacturers but from homeowners who are afraid that less exterior lighting around their house will make them less safe.

But Duffek said homeowners need to understand that blocking light from going into the sky doesn’t mean blocking all exterior lighting. Duffek says the Dark Sky movement suggests homeowners buy outdoor lights with movement sensors that will go on if someone enters your yard, which can help alert you to danger and keep your energy usage down at the same time.

“When you keep the lighting on all the time, all you’re doing is lighting for the bad guys,” Duffek says.

Duffek says the biggest challenge now is to educate the public about the benefits of reducing light pollution and encouraging manufacturers to continue to design compliant fixtures.

“We always try to present it as a win, win, win solution,” she says.