Every home has a fire detection system. This vital safety feature should be well understood. Smoke detectors, carbon monoxide detectors and security systems give homeowners peace-of-mind. Furthermore, when combined with a security system, these devices work together to form a complete home protection plan.

The second type of detector is an ionization detector. It uses a small amount of radioactive material to ionize the air in an internal chamber. This in turn, generates a voltage that can be measured. By-products of combustion will change the voltage that is generated and trigger the alarm. This type of detector is better at identifying active combustion with little to no smoke.

While both types of smoke detectors will safely alert a homeowner to a fire, combination alarms exist that employ both methods. Consequently, the responsiveness of the whole system increases. Hard-wired detectors are also available which can be wired to trigger all the alarms in a home if anyone detects a problem.

In any appliance that uses combustion, such as a furnace or stove top, a potential exists for hazardous carbon monoxide buildup. This by-product is tasteless, odorless, colorless, and highly toxic in large concentrations. Therefore, a carbon monoxide detector is highly recommended. It will monitor the levels of CO in the air and alert inhabitants before they become dangerous. They are available as stand-alone units that can be plugged in to standard wall outlets or as combination roof-mounted CO and smoke detectors.

Home security systems have been around for decades and make use of a combination of sensors including door, window, glass-break, and motion sensors. Historically, these devices were hard-wired and fed back to a central control panel. Many modern systems make use of wireless sensors that allow for easy retrofitting of existing homes. Door and window sensors utilize a small magnet and magnetic strip held open when the door or window closes. If the magnet is moved away, the magnetic strip springs closed and triggers the alarm.

Glass-break sensors are placed near windows and use a microphone to listen for the distinctive frequencies associated with glass breaking. Motion detectors take advantage of a variety of technologies, such as passive infrared, microwave, or ultrasonic. This technology detects something moving within its range. These can be part of exterior security lights or interior motion sensors. Security cameras can also play a role in home security. Install them indoors or outdoors.

When installed and used properly, a home security system can easily increase home safety while reducing the chances of burglary or fire. Most insurance companies offer discounts for home security systems. Because of this, the entire cost of the system may be offset or eliminated altogether. Be sure to ask your insurance company about discounts to homeowner’s insurance for improving or installing a new security system.

Any business knows that productivity is key to growth, let alone staying afloat. Whether you are talking about a production line, a traveling salesperson, and yes even your office space; productivity is going to be the main driving factor which will allow your business to not only stay in business, but also experience growth year over year, month over month.

Here we are going to describe 23 ways to improve office productivity which will in turn allow you to realize higher profits, more output, and less money being wasted to lost productivity.

First on the list? Improving office productivity through computer applications:

Science proves that taking more breaks allows us to be more productive.

How does that work if we technically will have less “work time” by taking all these breaks?

It gives us time to collect our thoughts, time to let our mind roam, and even some time to talk and bounce ideas off of others.

So, instead of making employees hate working because you limit them to one break a day; let them take a short one every hour or two and watch the ideas and productivity outputs increase!

Not only should you be organizing your desk, but also the entire office.

A cleared out area allows for a clear mind to work at much higher levels of clarity. Whether you have a cubical office design or a more open concept; requiring all areas of the office to be clear on either a weekly or daily basis should be a must.

Sure, not everyone likes to clear. But, if you give employees 10-15 minutes to clean their area at the end of every day I’m sure most people will be happy to do so (especially if you explain it is part of your initiative to improve productivity in the office)!

Some people have a habit of checking their email every 10 minutes while they are waiting for someone important to get back to them.

In reality, the likelihood of them replying back right away even if you get back to them quick is slim. On top of that, it seems down right desperate.

By implementing 2-3 time periods (again, depending on the department) that people should check their email; you will end the constant refreshing of email pages by a lot of your work force. This allows people to get back to work and pay much more attention to their work at hand.

There can be multiple things wrong with your lighting system that might be throwing off people in the office.

First of all, if you have fluorescent lights then you might just have a few (or a lot) of lights in your office that flicker or even worse, buzz. This can cause eye stress, annoyance, and a general distraction.

On top of that, you may have either an under-lit or over-lit office. Both are bad, and it’s up to you to find the optimal light output for your office. This can be done by surveying employees on your lighting system and going from there.

Lastly, low quality light can be an issue. An easy way to not only improve the quality of light but also get rid of flickering and buzzing light issues is by upgrading your reduce your energy usage by up to 30% or so. Sounds like a win-win situation here!

Not only will they help with productivity, but they will also clean the air of toxins which will keep the air fresh and not-so-stuffy.

Stop making it so difficult to get around. Make it easy to get to the bathroom, to the trash, or even to an outlet.

Time is money, and if people are having to spend time just to get to the most basic things you aren’t setting up your office for success (literally).

Using office design to increase productivity can be difficult, sure. But it doesn’t have to be all that complex. You could even get some people together to brainstorm what could be done to best optimize the space you have to best serve efficiency in the office. So while there will never be the “best office design for productivity” hack or tip (due to all offices being different), you can always use some general guidelines and common sense to help you out.

Wherever the noise may be coming from, while it may not effect everyone it may be effecting some people.

Now, this can be an easy fix if the noise is coming from within the office. To solve this issue, all you need to do is address the area of concern and fix it. But, what if the noise is coming externally on a frequent basis?

Well, you can do either of two things. Firstly, you can try to address or confront the external noise producer and see if there is anyway for it to stop at least during your time of work. If that doesn’t work, then you might need to install sound proofing technology into your walls. This can get pricey sure, but you’ve got to weight the benefits of having less noise in the office versus the cost it is going to be to make the upgrade.

Although you might think that you won’t be able to get everything in if you shorten meetings, you would be mistaken!

In fact, having shorter meetings make them much more focused and thus; more productive. Even if you have two meetings over one a week because they are shorter, it is much better to have two 10 minute meetings over one 30 minute one that lacks purpose.

On top of that, do you really need to have a meeting? Or, are you just holding meetings to “have a meeting?” If it is the latter, try scheduling meetings only when they are needed, rather just out of habit.

Looking for ways to motivate the office into getting stuff done? 43Folders.com and it’s a simple concept: work for ten minutes, break for 2, then repeat this 5 times (or an hour).

You might say, “are you mad?! No way I’ll let my employees take a break every 10 minutes.” But here it out…

Maybe you shouldn’t implement this tactic specifically, but make a variation that works for your needs but still allows for productivity to be most optimal. And yes, there will be times when extreme concentration is required for more than 10-20 minutes, and obviously this doesn’t have to be a “set in stone” type deal. Instead, make it a generally accepted practice to partake in such method of break and work balancing.

(We already talked about more breaks in #3, but we thought this hack was worthy of its own).

Have you ever listed a job listing opportunity with one of the qualifications as “multitasking?” If so, you’ve got it all wrong. In fact, you should be listing a qualifications as “the ability to be laser focused on one thing at a time.”

Multitasking Parkinson’s law” in short says that we will fill whatever time is allotted to complete a given task.

Why do you think people with a 3 month deadline to get a presentation done still find themselves struggling to get it ready to go last minute? Because they will fill the entire time they are given to finish it. This goes with any task, and if you shorten the time allotted to finish tasks you will see more getting done because people will work to fill the allotted time given.

This of course can be used too far and not given enough time to get things done with all the proper due diligence required. Finding a good balance of long enough but not TOO long will be difficult, but start looking into deadlines and what exactly defines how far out they get set and start thinking about setting shorter (yet still doable) deadlines.

Studies show that standing will not only improve health, but it will also improve productivity. Focus goes up and thus more work can get done.

call center workers showed that pollution in the office reduced productivity levels. As you can imagine, pollution is a major issue in a lot of places, especially in bigger cities.

If you’re longing for a bulb that’s going to save energy and that lasts, this LED bulb replacement guide is a great place to get a feel for the type you might need. Other than finding a bulb that fits the socket, has the correct voltage, and meets wattage requirements, there’s no list of rules as to what bulb you should use in a certain fixture. This guide shows that even the same type of fixtures can require or accept different bulb types. LED replacement bulbs are available in a variety of wattages, intensities, voltages, and with different base types; they can even emit different colors of light. You have the freedom to choose a bulb that fits your needs, and there are plenty of available options.

Clicking each picture below will direct you to a page of similar bulbs. Keep in mind, this post just touches the surface of available LED bulbs. If you don’t see what you need, use our site to see hundreds of lighting options.

Track light fixtures are found in many homes and allow for aimable illumination exactly where it’s needed. These fixtures almost always contain MR11 spotlight bulbs. In addition to track lights, these bulbs are often used in recessed, pendant, display case, and desk light fixtures. MR16 and MR11 LED replacement bulbs have GU10 or GX5.3 bi-pin bases and are available in a wide variety of styles with many LED configurations.