According to the Electrical Safety Foundation International, more than 30,000 non-fatal shock accidents happen every year. Electrical shock is relatively easy to prevent if you know what to look for and what to avoid. With some basic knowledge and safety training, you won’t become a statistic. Read some of our quick tips below to find out how you can protect yourself and others from accidentally receiving an electrical shock.

Wall plates and light switch covers are not just there to make sockets look better–they keep debris out of the sockets and shield fingers from exposed wires. Never stick your hands or a metal utensil into a wall socket; the currents from an electrical shock can cause injury or even death.

Educate yourself on how the fuses, circuit breakers, and wires are set up in your home. This simple step can prevent injury and also allow you to know the limits on where you can plug in powerful tools and appliances. In addition, it can be helpful to match light bulbs’ wattage to your lamps. You can usually see the recommended maximum wattage printed around the light bulb socket. It’s wise to use light bulbs with equal or lesser wattage so you don’t overload the lamp wiring. It’s also good to know if your house is wired with aluminum or copper wiring, because these metals handle heat differently.

Any electrical equipment that sparks, gives out small shocks, frequently short circuits, or has frayed wires is not safe to use and may need to be fixed or replaced. If any wires are sticking out from the wall, don’t tamper with them. Have an electrician inspect the wires first, especially if they appear damaged.

When storing cords, don’t let them twist or get into haphazard knots or else they may tear. Tuck them away somewhere that small children can’t find them and pets can’t chew on them. Many hardware stores sell cord organizers to make this easy for you.

Try to avoid having too many heavy appliances plugged in and running from the same outlets or power strips. This can lead to overheating, a blown fuse, or an electrical fire. Use extension cords sparingly and try to limit their use to temporary arrangements when doing work around the house. If you’re constantly in need of extension cords, you might be better off just having another outlet installed.

Never leave electrical appliances somewhere they can easily fall into sinks or bathtubs. If an appliance accidentally falls into the water while plugged in, turn off the power to that circuit before you remove the object from the water. Then let the appliance fully dry and ask an electrician if it’s still acceptable to use. Store outdoor electrical appliances in a dry place where they are safe from rain, hoses, or swimming pools.

If you are working with electricity around the house, turn off all appropriate power sources and wear protective gloves and/or boots. Remove any metal jewelry and don’t wear clothing that could get caught on a wire. If you’re the one doing the work, do not assume that someone else has turned off the power sources. Always double check for yourself for your own safety.

Don’t hesitate to call a professional with questions if an electrical job is intricate or beyond your scope. A tiny mistake can lead to serious consequences, so hire a licensed electrician for any complicated or dangerous jobs.

Being a mom I can totally relate to those  early morning or evening practices for swimming, soccer or ice hockey practice. One of the biggest concerns I have is leaving or coming home  in the dark!  I was always worried about my safety and my child’s,  that’s why I would highly recommend motion sensor lights as they provide the safety and security we need by  illuminating the front door and/or driveways. The best added bonus to this is they turn on and off  by themselves saving your money on energy.

Here at Expert Electric – we care about your safety. Just call our office 604-681-8338 and we will be happy to help you.

Does your circuit breaker keep tripping? Do you constantly have to go through the process of resetting your breaker to get your necessary electrical systems back on? At Kolb Electric, we know this is one of the more frustrating electrical issues you can deal with on a regular basis.

So what causes a tripped circuit breaker? An overloaded circuit is the most common reason for a breaker tripping and usually happens when a circuit has more electrical load connected to it than it really should have. Let’s say you have a 15 Amp circuit breaker that is protecting a 15 Amp circuit. If 20 Amps of current start flowing through it because a toaster, TV, radio, and space heater were all connected to the same circuit and were on at the same time, then what you’re left with are tripped circuit breakers aimed to prevent overheating of the circuit.

In four easy steps, you can reset your circuit breaker. You need to:

If your breaker continues to trip even after resetting it, there could be an issue with your electrical system. This means it’s time for you to contact a quality electrician in Virginia who can uncover the source of the problem, which could be due to one of the following:

At Kolb Electric, we have specialized in providing professional electrical service since our establishment in 1925. Impeccable customer service and attention to detail has allowed us to become one of the top electricians in Alexandria, Arlington, Fairfax, and all of Northern VA. We can help you end your tripped circuit breaker headache once and for all—contact us today!

LEED) is a program that offers certifications for green buildings. The third-party verification program was created by the U.S. Green Building Council (USGBC) as a means for healthier, sustainable, environmentally friendly, more efficient, buildings, homes, and neighborhoods. In a nutshell, LEED supplies the guidelines for creating a green building. Using individual points-based rating systems that differ by project type, building projects can achieve Certified, Silver, Gold, or Platinum statuses. Project types can include new building design and construction, building operations and maintenance, interior design and construction, homes, and neighborhood development. For each project type, LEED has a list of credits with specific requirements regarding anything from building materials to bicycle storage. Points are awarded based on the degree to which the requirements are met. There are several credits that include LED lighting is the first choice of any builder trying to achieve an LEED status.

The following LEED credits relate to lighting for new construction:

full-cutoff LED wall packs that are designed to reduce glare by emitting illumination downward instead of outward. Many indoor and outdoor LED lights come with or can be used with dusk-to-dawn or PIR motion sensors to prevent wasted light.

A19 bulbs to powerful EAp2 – Minimum Energy Performance

Buildings must meet a minimum level of energy efficiency to receive points for this credit. The goal is to minimize environmental and economic problems that can be caused by high energy use. As mentioned above, LED lights are extremely efficient and can dramatically reduce a building’s carbon footprint.

dimmable under-hutch LED strip lights with handheld remotes and bulbs, or other dimmers.

SFGATE, “The Organisation for Economic Co-operation and Development (OECD) warns that, given the current trends, energy-related emissions will increase by 70 percent by 2050. This can accelerate the negative consequences of climate change, including higher temperatures and a rise in the frequency of extreme weather events.” Lessening energy consumption with LED lights and renewable energy sources will reduce greenhouse gas emissions and help prevent that prediction.

website, the USGBC states that 92.2 percent of 7,100 LEED-certified new construction projects are improving energy performance by at least 10.5 percent. In addition to other methods of energy improvements, lighting plays a key role. One building can have hundreds of lights. Using LED lights will not only help achieve an LEED status, but they will also contribute to a greener future.

To commemorate our fifteenth year, we are taking a look back at what life was like 15 years ago. Do you remember May 1999? It was a month of ups and downs. We gained Star Wars: The Phantom Menace but lost Shel Silverstein. Natural disasters of epic proportions and new leadership in world powers made the month one that would change the course of history. Legal precedents were established and technologies that we all utilize now were just being announced. Here are fifteen moments in history from fifteen years ago. Next stop: May 1999.

1. Bluetooth Is Announced

Early in the month, for about six days, 152 tornadoes ravaged the mid-west and eastern U.S. It was the worst in Oklahoma, with one F5 tornado – the second strongest recorded in U.S. history – that caused $1 billion in damage.

3. Goodbye, Shel Silverstein

In Milan, Italy, after 22 years of restoration work, Leonardo da Vinci’s newly-restored masterpiece The Last Supper was put back on display. This is an unforgettable moment in art history.

5. The Ancient Operating System

via wordpress.com

The Mummy, a horror adventure starring Brendan Frasier, was released in the U.S. in May 1999. Although the film was originally meant to be a low-budget horror series, it turned into a blockbuster hit.

7. Not So Entertaining Anymore

Star Wars: The Phantom Menace was released in theaters, and millions of children began having nightmares about red-eyed guys with horns chasing them with two-sided light sabers. And we thought Darth Vader was intimidating…

9. Italian Stallion of Politics

Teenie boppers lost their minds as they excitedly tore open the packaging on their copies of The Backstreet Boys’ newest release, Millennium.

11. Here’s SpongeBob!

Kansas City, Missouri, wrestler Owen Hart (Blue Blazer) fell 78 feet to his death while being lowered into a World Wrestling Federation ring during WWF Over the Edge.

13. So Long, Home Improvement

The Dow Jones Industrial Average closed above 11,000 for the first time in its history at 11,014.70. Many speculate in hindsight that this bump was actually artificially created by overlending and that in retrospect this was a warning sign for the future recession. It was a cause for celebration then: Now, it’s something from which we have hopefully learned a lesson.