How to Choose the Right Sized Chandelier for Your Home

Chandeliers are designed to float in a room as an important part of the decor. Too large and this fixture will overpower the space. Too small and it will look out of place as an afterthought.

“Placing a chandelier that is too small in a space is likely the biggest mistake because it’s very noticeable,” says Joe Rey-Barreau, educational consultant for the American Lighting Association (ALA) and assistant professor of interior design at the University of Kentucky. “Great designers, therefore, tend to make their decisions on fixtures that may appear slightly larger than might be appropriate. It’s generally always best to make the mistake on a fixture being too big than too small.”

Capitol Lighting offers a wide range of modern chandeliers to crystal and Italian chandelier styles to choose from.  Whether you are purchasing an Italian chandelier or a modern chandelier, size matters! To make sure your chandelier is the right size for the room in which it will hang, consider the following questions:

1. How high is your ceiling? Taller ceilings demand larger chandeliers. 4. What is the form and design of the chandelier? Light, airy fixtures tend to look larger.

To have all of your chandelier questions answered, visit one of our seven Capitol Lighting showrooms today!  

One of the best ways to relax outdoors is by sitting in your own private hot tub. After a long hard day at work, a soak in the hot tub can help rinse away all the stresses of work and life in general. A hot tub is also a great way to entertain a few friends on the weekend. Once you have picked out the tub that you have been dreaming of, the next step is getting it set up and ready for you to enjoy.

Setup

Although you may be extremely excited to start filling your new toy up with water for that first use, hot tubs require an electrician. Santa Monica homeowners will need an electrician to help wire the hot tub to the home. These wonderful devices are not something you can simply plug into the patio outlet.

The tub or sauna will need to be hard-wired into the home’s power. Typically, because of the electric requirements, a dedicated breaker will be needed. Depending on the available service, you may need an additional breaker installed.

It is not uncommon for permits to be required for the setup and installation of a hot tub. An inspection may also be needed. A qualified professional will need to make sure the hot tub is wired correctly and safely. These are all things that will need to be handled by an electrician. Santa Monica residents can call The Electric Connection to discuss the setup of their new hot tub.

Maintenance

Like anything that is run by electricity, there are times when the unit will fail. Never try and fix the hot tub yourself. In many cases, you could end up voiding your warranty by doing so. If you ever run into trouble with your hot tub, call an electrician to take a look and save yourself time and money from a voided warranty. The Electric Connection is here to help you get your hot tub up and running.

Among the more obvious pieces of electrical safety advice you may have encountered is to never saw the third prong off of an electrical plug in order to fit it into a two-prong outlet. But just because we can recognize that as a self-evidently bad idea doesn’t mean everyone knows why it’s dangerous.

Two-prong outlets have only two wires: a hot wire and a neutral wire. But a three-prong outlet also has a ground wire, which is a safe place for unexpected bursts of current to go when they occur. Without that connection between the ground wire and the plug, wild current can go anywhere: into your electrical device, where sensitive components can be destroyed, or worse, into your body. Shock and electrocution are more likely to occur when no ground wire is present.

Moving On Up

Three-prong outlets didn’t become standard in North American homes until the late 1960s, so while modern homes should be in good shape, there are plenty of homes out there with old two-prong outlets.

As a quick fix, you might be tempted to use adapters that convert two-prong outlets to fit three-prong plugs. You should resist the urge to use these so-called “cheater plugs”, however -- the ground wire is there for safety, and simply bypassing it creates a potentially serious hazard.

Instead, you should seriously consider upgrading the outlet if you need to regularly use three-prong plugs in that area. If you live in an older home where most of the outlets are two-prong, this is an upgrade you’ll need to do sooner or later.

When it comes to upgrading two-prong outlets, there are two basic options. The best choice is to have ground wires installed so that the outlets are fully up to the current standard. Unfortunately, this can involve several hours of electrical service and may require some cutting into walls, depending on how many outlets are being upgraded and how the home is configured. It may be a big undertaking, but it’s a quality investment in your home and safety.

A cheaper alternative is to upgrade to a ground fault circuit interrupter outlet, or GFCI. These outlets are capable of shutting themselves off if an electrical shock risk is present, but they won’t protect sensitive electronics from surge damage. The trade-off is that there’s no need to run a ground wire.

Out With the Old, In With the Old?

If you don’t like either of these options but you’re having trouble with a two-prong outlet, it’s technically not a violation of code to replace the outlet with another two-prong version. Just keep in mind that this arrangement leaves both people and electronics vulnerable, so use these outlets with care and consider making a plan to upgrade later.

Ready to upgrade those old outlets? Start the process today by scheduling a no-obligation consultation with your licensed, local electricians.

As you can see, no matter which type of scenario that lighting comes up in; it matters. Whether you run an office or a huge industrial sized factory; the quality of your lighting is highly important.

We are going to list the most important points that qualifies “good” industrial lighting systems, what to watch out for, as well as what to be on the look out for when it comes to your commercial lighting purchases.

Quality of light being produced. The quality of light that your lighting system will make or break your lighting system investment. If you cheap out initially and go with cheaper light sources such as HPS, you will regret it in the long run. Not only does LED typically offer a better CRI score, but it has many other benefits such as…

Do you want rebates for your lighting investment? If so; buy DLC qualified.

Conclusion