‘Tis the season to be jolly with thousands of colorful lights glowing from your trees, gutters, front door wreath, and bushes. Billions of lights will be used to dress up homes and businesses throughout the country during the final months of the year. As festive as the light-up Santa and Rudolph may look on top of your roof, you have to make electrical safety the focus of your holiday lighting festivities.

Following are five tips to help you avoid common holiday lighting problems others will experience this year. Commit them to memory so electrical safety does not pull the plug on your merry-making décor this year:

1. If you are putting up a live Christmas tree, make sure it is well-watered and use LED bulbs for all decorations placed on the tree. Dry trees and heat from non-LED bulbs create home fires every holiday season. Do not place candles where they may be knocked over on a live tree. LED bulbs should be used when decorating trees in your outdoor landscape as well.

2. Thoroughly inspect every string of lights and plug-in points before using them indoors or outdoors. If you notice any of the following at even one point on the string, toss it out or repair the damage before use to ensure electrical safety for your home:

3. Power cords should be used to connect strings of lights, but pay attention to how many strings you are connecting per cord. In general, more than three strings of lights could be too much.

4. Avoid hanging your lights with tacks, screws, or nails. You do not want to crack, tear, or otherwise damage the electric cord. You can use insulated hooks instead.

5. Make sure you are plugging outdoor lighting features into ground fault circuit interrupter outlets. These outlets reduce the risk of electrical shorts or dangerous shocks if water, wet leaves, and other outdoor elements get into the sockets.

6. Do not use indoor-only holiday lights outdoors. There are clear differences in how these types of lights are made, even if they look the same. For instance, outdoor lights are created with more insulation so they are not as easily affected by rain and snow.

Do not allow electrical safety to cut the cord on your holiday lighting festivities. Light up the house and allow the big snowman to wave at the neighbors from your front lawn. Just make sure your snow globes, trains, and twinkling tree lights present no danger to your home, your family, and your neighborhood.

My wife and I are the happy parents of a sixteen-month-old boy. Having a kid has turned out to be every bit as wonderful and exhausting as our family and friends told us it would be. We can see why everyone we knew with children, including our own parents, told us with that knowing smile, “Your life will never be the same.” They were right. There’s never a dull moment, is there? Every day presents new challenges and responsibilities.

For example, a couple hours ago, my son was screaming at his grandma for taking a bite of his banana. Nap time soon? Sheesh.

3. Use an In-Wall Night Light

Instead of that old incandescent night light just begging to be pulled out of the wall by your young one’s inquisitive hands, consider a safer and greener alternative. LED night lights will safen and cozy-up baby’s room in elegant and energy-smart fashion.

If there are two things you should never mix, its water and electricity. Water actually reduces the body’s electrical resistance. This is why you probably know to never get electrical devices wet; such as bring a radio into the shower with you. It is important to keep yourself safe in the room that has the most water in it. Here are some tips when it comes to running electricity through the bathroom.

Sometimes it can be difficult to light the bathroom properly. With minimal windows or frosted windows, the light just doesn’t come in the same. Lighting is even more important in this situation so you have proper sight to avoid any hazards. You may require ample lighting to keep everything in your bathroom visible at all times. Plus, proper lighting can make your bathroom more peaceful and relaxing.

When installing lights in a bathroom it is important to ensure that they are watertight and water proof. When you have a hot bath or a hot shower there can be a significant amount of steam. If this steam gets into the light fixture or electrical connection it can corrode the wires and increase the chance of electrical surges and fires. If you are installing new lights in your bathroom have an expert check the product and connections to ensure that you are safe.

Blow dryers, shavers, curlers – there are many electrical devices that are commonly used in the bathroom so there needs to be an electrical outlet. This can be a huge risk for electrocution if not properly placed. Electrical outlets should be on their own dedicated circuit. In the event that there is a surge or water contact, only that circuit will shut off. The outlet should also have a GFCI (grounded fault circuit interrupter). Without a grounder, electricity can escape from the device and if you are wet, this is the last thing you want. Lastly, the outlet should be near the sink for functionality, but not close enough that any wires can hang into the water.

Our bathrooms can be a place of peace and escape, but you must respect the danger of putting electricity near water. If you are looking to remodel your bathroom call in an Expert Electrician.

If you’ve never visited the DIY, home renovation blog Young House Love, you’re in for a treat. John and Sherry, bloggers extraordinaire, are renovating their home step-by-step, giving their readers a detailed look into the process. Every day they have some new clever project to write about. (And the way they tell stories gets addictive, quick).

The blog has a ton of posts on home lighting, some technical, some crazy and fun. Today, I thought I’d share with you my 3 favorite DIY lighting projects from Young House Love: