Restriction of Hazardous Substances (RoHS): RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Warranties

Super Bright LEDs, Inc. offers a minimum 2-year warranty to protect against manufacturer defects and malfunctions. Longer warranties are available depending on the product. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair, or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.

Read more

Lifetime Warranty

Super Bright LEDs, Inc. offers a Lifetime Warranty on a variety of products to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted.

Read more

CE: Meets European health, safety, and environmental standards

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

UL Recognized: Product component safety and environmental certification from Underwriters Laboratories (UL) LLC

Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Recognized label ensures that a product component, such as a power supply or LED light strip, has been tested and verified as safe to use in a UL-Listed product. UL-Listed product samples are tested by UL and meet their Standards for Safety requirements.

DLC: Listed as a quality, energy-efficient product by the DesignLights® Consortium (DLC®)

The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC’s Qualified Products List. For more information, click

DOT Approved: Approved by the Department of Transportation (DOT)

The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.

SAE International Class 1: Classified for use as emergency vehicle lighting by the Society of Automotive Engineers (SAE)

Vehicle warning lights are ranked by the Society of Automotive Engineers (SAE) according to class. A Class 1 LED light delivers the most amount of light (in comparison to class 2 and class 3 lights) and is ideal for emergency lighting on ambulances and fire trucks as well as police and rescue vehicles.

ETL Listed: An ETL-Listed product meets national safety standards

A product that bears an ETL-Listed label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.

FCC: Complies with Federal Communications Commission (FCC) rules. Won’t cause harmful interference.

Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won’t cause interference with other electronic devices. According to FCC’s website, “The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories.” Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC’s guidelines and limits and do not cause harmful interference.

SAA: Standards Australia (SA) compliance

Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.

IP65

The weatherproof product allows zero entry of dust. It is protected against jets of water and may allow limited liquid entry.

IP66

The weatherproof product allows zero entry of dust. It is protected against strong jets of water and may allow limited liquid entry.

IP67

The waterproof product allows zero entry of dust. It is protected against the effects of immersion between 15 centimeters and 1 meter.

IP68

The waterproof product allows zero entry of dust. It is protected against long periods of immersion under pressure.

IP69K

The waterproof product allows zero entry of dust. It is protected against high-temperature, high-pressure water and steam.

UL 844: Meets requirements from Underwriters Laboratories (UL) LLC for use in hazardous (classified) locations

UL 844 requirements cover fixed and portable luminaires for installation and use in the following hazardous (classified) locations in accordance with the National Electrical Code, NFPA 70:

These requirements cover luminaires for use only under the following atmospheric conditions:

There are times when a circuit breaker will trip, which results in no power to an outlet or specific circuit. This can be caused by a number of different things. In most situations, the circuit breaker can be turned completely off and flipped back on without any problem. The following steps are provided by an electrician. Beverly Hills homeowners can count on The Electric Connection for more information about this problem.

*When you suspect a circuit breaker has tripped, turn off, unplug or shut down any electrical equipment, like computers, that can be damaged when the power is abruptly turned off and on.

*Go to the breaker panel and find the breaker that is flipped. You will be able to identify it by an orange color showing in most cases. The switch may look like it is in the middle rather than the far right or left. If it isn’t obvious which breaker has tripped, start at the top and work your way down until the power returns to the outlet.

If the power was fixed and the outlet is working fine, it may have been overloaded. Having too many things plugged in is one reason this happens. The problem could have also been a faulty appliance being plugged in.

If the power is not restored, it is time to call an electrician. Beverly Hills residents will be interested to know that about 25 percent of tripped breaker issues can be fixed with these steps. The other 75 percent of the time will require an electrician to come in and troubleshoot the problem. One common fix is a breaker replacement. Over time, breakers can become worn and faulty.

To avoid any electrical fire hazards, it is best to get the breaker replaced before it becomes a serious problem. Give The Electric Connection a call today if you need help with tripping circuit breakers.

Sometimes, nature gets a little wild and shakes things up for us. We get so used to our normal routines and typically daily lives, that when we are faced with a wild thunderstorm packed with high winds, large hail and lightning, we forget what the aftermath of one of these storms is like. It isn’t until we are forced with things like wind damage and power outages that we are suddenly forced to deal with a major interruption in our seemingly normal lives. An electrician in Burbank wants to help you prepare to deal with one of these events so it is not quite as big of an interruption. You can count on the team at The Electric Connection to provide you with valuable tips about dealing with power outages.

1-Take the time today to gather flashlights and batteries. Don’t wait until a power outage happens. Keep the flashlights in a safe place that every member of the household can easily access.

2-Post the emergency outage number in a conspicuous spot i.e. on the refrigerator, next to the phone or on a corkboard. You will want to call the hotline to get an idea of how long you can expect the outage to last.

3-Show each member of the household which electronics should be unplugged from the wall in the event of a power outage. This will prevent sensitive electrical equipment from being damaged when the power surges back on.

4-Educate your family about why it is important to keep the refrigerator doors closed when the power goes out to ensure the fridge and freezer maintain their temperatures for as long as possible without power.

5-Consider having a standby generator installed by an electrician familiar with Burbank electrical standards.

Being prepared can make all the difference when a power outage strikes. If you would like to learn more about what you can do today to prepare for an outage, give The Electric Connection a call today.